Professional Documents
Culture Documents
Structures With HDF: Technical Data Sheet
Structures With HDF: Technical Data Sheet
Technical Data:
Thickness Thickness Type DIN EN 323 DIN EN 310 DIN EN 310 DIN EN 319 DIN 53291
The criteria for the identification of the technical data of lisocore® can be provided on request.
will gladly be of assistance in case of user’s specific questions. Furthermore, we expressively refer to the application of our
Terms and Conditions which shall govern exclusively and comprehensively all claims made by user in relation to purchases
made unless expressly agreed otherwise individually between light weight solutions GmbH and user.
lightweight solutions GmbH I Carl-von-Ossietzky-Straße 17-21 I D-83043 Bad Aibling Geschäftsführer: Michael Schäpers | Robert Vuga
fon +49 8061 34979-0 I fax +49 8061 34979-99 USt-Id-Nr. DE 270424987
info@lightweight-solutions.de I www.lightweight-solutions.de Amtsgericht Traunstein HRB 19867
Technical Data Sheet
Structures with MDF
Technical Data:
Thickness Thickness Type DIN EN 323 DIN EN 310 DIN EN 310 DIN EN 319 DIN 53291
The criteria for the identification of the technical data of lisocore® can be provided on request.
will gladly be of assistance in case of user’s specific questions. Furthermore, we expressively refer to the application of our
Terms and Conditions which shall govern exclusively and comprehensively all claims made by user in relation to purchases
made unless expressly agreed otherwise individually between light weight solutions GmbH and user.
lightweight solutions GmbH I Carl-von-Ossietzky-Straße 17-21 I D-83043 Bad Aibling Geschäftsführer: Michael Schäpers | Robert Vuga
fon +49 8061 34979-0 I fax +49 8061 34979-99 USt-Id-Nr. DE 270424987
info@lightweight-solutions.de I www.lightweight-solutions.de Amtsgericht Traunstein HRB 19867
Technical Datasheet
Test Criteria
The technical data is identified by testing in our in-house test laboratory in accordance with the rel-
evant standards for wood materials. Considering that specific test set-ups were implemented.
The indicated data corresponds to the characteristic stress grade (5% quantile) and gross density
grade (95% quantile) according DIN EN 1058.
The following figures have in general been identified for the lightweight material lisocore®:
Deviations from the standard DIN EN 310 for the identification of the Bending Strength and
the Bending Elasticity Modulus (ill. 1.1, 1.2)
Deviations from the standard DIN EN 319 for the identification of the Transvers Tensil
Strength (ill. 2)
Deviations from the standard DIN EN 53291 for the identification of Compression Strength
(ill. 3.1, 3.2)
For a panel thickness of ≤ 16,00 mm the sample length and width is 200 mm
01/ 2019
For a panel thickness of > 16,00 mm the sample length and width is 250 mm
lightweight solutions GmbH I Carl-von-Ossietzky-Straße 17-21 I D-83043 Bad Aibling Geschäftsführer: Michael Schäpers | Robert Vuga
fon +49 8061 34979-0 I fax +49 8061 34979-99 USt-Id-Nr. DE 270424987
info@lightweight-solutions.de I www.lightweight-solutions.de Amtsgericht Traunstein HRB 19867
Technical Datasheet
Test Criteria
Test Set-up
Bending Strength
Iron sheet
width 30 mm
Test Piece
Panel thickness ≤ 40,0 mm,
Sample width 150 mm
Test Piece
Panel thickness > 40,0 mm,
Sample width 200 mm
Test Set-up
Transverse Tensile Strength
Self-aligning joints
Test Piece
Length / Width 250 mm
[ill. 2]
Test Set-up
Compression Stength
Self-aligning joint
Test Piece
Panel thickness ≤ 16,0 mm,
Length / Width 200 mm
Test Piece
Panel thickness > 16,0 mm,
Length / Width 250 mm
01 / 2019
[ill. 3.2]
[ill. 3.1]
lightweight solutions GmbH I Carl-von-Ossietzky-Straße 17-21 I D-83043 Bad Aibling Geschäftsführer: Michael Schäpers | Robert Vuga
fon +49 8061 34979-0 I fax +49 8061 34979-99 USt-Id-Nr. DE 270424987
info@lightweight-solutions.de I www.lightweight-solutions.de Amtsgericht Traunstein HRB 19867