Professional Documents
Culture Documents
SD Memory Card Connectors: DM1 Series
SD Memory Card Connectors: DM1 Series
DM1 Series
Card
Standard type
Metal cover extends over the back of the connector.
■Features
1. Withstands higher force of card insertion Card
Metal cover extends over the back of the connector
allowing it to withstand force of up to 400 N (static load) Reverse type
when dropped or accidentally hit.
Metal cover extends over the back of the connector.
2. No damage to the card when accidentally
pulled-out
The connectors will release the card when a moderate
pull-out force of about 4 N is applied. There will be no No damage to the card when
damage to the lock components and all connector accidentally pulled-out.
functions will not be affected.
3. Accidental card fall-out prevention
Built-in lock feature holds the card securely in place.
4. Reliable Card Insertion and Withdrawal
Built-in Push-in / Push-out ejection mechanism assures
simple and reliable card insertion and withdrawal.
5. Designed to accept Secure Digital I/O card
(Built-in Ground Contact)
The connector allows use of various expansion modules,
including the Bluetooth communication modules. Accidental card
fall-out prevention
■Applications
Notebook PC's, digital cameras, PDA's, audio/video
equipment and other devices utilizing SD I/O cards.
C39
■Product Specifications
Current rating 0.5A DC Operating temperature range:-25ç to +85ç (Note 1) Operating humidity range : Relative humidity 95%
Rating
Voltage rating 125 V AC Storage temperature range:-40ç to +85ç (Note 2) max. (No condensation)
6. Temperature cycle
Contact resistance: 40 mø max. from initial value Temperature: -55ç/ +5ç to +35ç/ +85ç/ +5ç to +35ç
Insulation resistance: 100 Mø min. Duration: 30 / 5 / 30 / 5 (Minutes) 5 cycles
7. Durability (mating/un-mating) Contact resistance: 40mø max. from initial value 10000 cycles at 400 to 600 cycles per hour
8. Resistance to soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note1: Includes temperature rise caused by current flow.
Note2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
■Materials
Component Material Finish Remarks
Insulator Heat resistant thermoplastic compound Color: Black UL94V-0
Contact area: Gold plating
Contacts Phosphor bronze --------------------
Termination area: Tinned copper plating
Cover Stainless steel Termination area: Tinned copper plating --------------------
Stainless steel --------------------
Others --------------------
Piano wire Nickel plating
■Ordering information
DM1 AA - SF - PEJ
1 2 3 4
C40
■Standard type BPCB mounting pattern
25.4±0.05 2 +0.1
0
22.4±0.05
4.125±0.05 15±0.05
1.7±0.05 P=2.5±0.05
2±0.05
1.35±0.05
1.2±0.05
9-1.1±0.05
2 +0.1
0
1.6±0.05
9.2±0.05
18.15±0.05
4.55±0.05
20.75±0.05
0 .1
4-2 +0.1
+0
23.2±0.05
2
0
3
3-1 +0.1
Card detection switch
1.
2-Ø
0
2
Part number HRS No. Write protection switch
DM1AA-SF-PEJ(21) 609-0004-8-21
2 +0.1
0 1.2±0.05
1 L
C
1 28 1
13.2
9.75
8.05 No.4
2.9
t=0.2,W=0.6 15 No.2 No.3 No.5 No.6
5.625 P2.5 No.1 No.7
2.5
No.9 No.8
9.2
18.15
20.75
4.55
23.2
30.5
3-0.5
4-1.5
1 L
C
1 L
C
Weight:2.2g
5
11
SD Card
SD Card SD Card
C41
■Reverse type BPCB mounting pattern
9.47±0.05 12.8±0.05
11.2±0.05
9.75±0.05
8.05±0.05
11-2.5±0.05
12.5±0.05 0.8±0.05
0.8±0.05
P=2.5±0.05 5.625±0.05 1.4±0.05
CARD DETECT
1.25±0.05
COMMON FOR CD & WP
1.05±0.05
1.4±0.05
A
8-1.1±0.05
23.48±0.05
26.98±0.05
3 5.62
28.25±0.05
2.03±0.05
28.5±0.05
12.57±0.05 11.23±0.05
14.13±0.05
Part number HRS No. 14.25±0.05 11.93±0.05 WP
DM1B-DSF-PEJ 609-0003-5 C
hole)
hole)
hole)
(Through
(Through
(Through
-0.1 (Land)
(Land)
+0.1
1.2 (Land)
(Land)
+0.1 0
1.2 +0.1
(Land) 1.2 0 (Land)
0
+0.1
+0.1
+0.1
0.8 (Through hole)
+0.1
+0.1
-0.1
+0.1
+0.1
0
+0.1 0
0.8 (Through hole)
2.4
2
+0.1 0
0
0
1.9
1.5
1.7
1.3
(R0
(R0
.4)
.4)
.4)
2 8.63 2 18.68
2 16.85
2 2
6.95 7.65
2 5.62
6-0.65
1 L
C
28 No.5 No.4
No.6 No.3
(14.35) No.7
No.2
No.8 No.1
1 L
C
1.85
1.5
2.9 No.9
1.05
2
2
10:Card ejected(Card ejected dimension)
0.35
(5):Card pushed for insertion
2
27.45
(6):Card fully inserted
27.2
29.9
29
2
2
(1.77)
1 L
C
(0.25)
1 L
C OPEN CLOSE OPEN OPEN CLOSE
Weight:2.1g
C42
BPackaging specifications
●Embossed Carrier Tape Dimensions (Standard type) 450 pieces per reel
1.75±0.1
4.35±0.3
36±0.1
Ø1
4±0.1 3.4±0.3
.5
2±0.15
+0
0
.1
20.2±0.1
40.4±0.1
44±0.3
Unreeling direction
2±0.15 3.4±0.3
+0
0
.1
20.2±0.1
40.4±0.1
44±0.3
Unreeling direction
●Reel dimensions
+2
44.4 0
Unreeling direction
D
(Ø150)
(Ø380)
Blank section(160mm min.) Embossed carrier tape Blank section (100mm min.)
Top cover tape
C43
■Recommended Temperature Profile
300ç
IR Reflow Conditions
Preheating: 150ç 30 to 90 sec.
Soldering : 235±5ç 10 sec. Max. MAX240ç
Soldering : 220ç 10 to 20 sec. 220ç
200ç
Soldering
150ç
Preheating
100ç
0ç
0S 50S 100S 150S 200S
Recommended Conditions
Reflow system : IR reflow
Solder : Paste type 63 Sn/37 Pb(Flux content 9 wt%)
Test board : Glass epoxy 60mm x 100mm x 1.6 mm thick
Metal mask thickness: 0.15 mm
C44