Professional Documents
Culture Documents
Infrasonic Amon Se Manual (Eng)
Infrasonic Amon Se Manual (Eng)
OWNER'S MANUAL
Table of Contents 1. Introduction
1-1. Main features……………………………………………………………………………………………1 AMON SE is the ideal mobile recording interface for both laptop and desktop computers. It offers 2 input
and 2 output channels in a solid, portable and stylish unit that provides means for connecting microphones
1-2. system requirements………………………………………………………………………………1 or musical instruments to any computer running Mac OS X or Windows. AMON SE is built and designed with
remarkable mic-preamp and Hi-Z input quality. It is the perfect solution for playback and high quality vocal
1-3. contents………………………………………………………………………………………………… 1 recording of condenser or dynamic microphones on the road. It is also designed for recording electronic
instruments such as guitars and bass guitars as well. Enjoy all the fine-tuned features and high quality
2. Overview…………………………………………………………………………………………………………2 multitask recording process without bulky external DC adapters with an easy to use USB bus powered
interface. All in one solution in an aluminium body gives impressive portability to carry it anywhere you go.
2-1. Front panel………………………………………………………………………………………………2 You will find further convenient features in AMON SE including Stereo Mix, 48V phantom power and coaxial
digital output.
2-2. Back panel…………………………………………………………………………………………………3
1.1 Main features
2-3. Top panel…………………………………………………………………………………………………3 • 2 in / 2 out - all in one audio interface
• USB bus powered
3. Hardware Setup………………………………………………………………………………………………4 • 24 bit / 48kHz
• Microphone preamplifier / Hi-Z input
3-1. Connection AMON SE to your PC………………………………………………………………4 • +48V phantom power
• Analog line (TS) output (2 in / 2 out)
3-2. Microphone connection……………………………………………………………………………4 • Digital coaxial output
• Zero latency monitoring
3-3. Hi-Z connection…………………………………………………………………………………………5 • ASIO 2.0, WDM and Core Audio
ENGLISH
AMON SE OWNER’S Manual – 1
2. Overview 2. Overview
❶ USB
❶ XLR microphone connector Type B connector is compatible with all types of USB ports (1.1, 2.0, and 3.0).
The XLR input on channel 1 is equipped with a custom high quality microphone preamplifier. AMON SE is designed to work perfectly on USB bus power and it doesn’t require external power supply.
The preamp works great with all types of microphones including dynamic, ribbon and condenser
microphones. The +48V phantom power switch is located at the back panel of AMON SE . ❷ +48V Phantom power switch
Turn the switch on when you need phantom power supply for your condenser microphone.
Caution: Always remember to turn off the +48V phantom power supply before connecting some Caution: Always remember to turn off the +48V phantom power supply before connecting some
dynamic or ribbon microphones. dynamic or ribbon microphones.
❷ MIC / Hi-Z Gain Control Knobs
Adjust the input gain of inputs 1 & 2 preamplifiers respectively. ❸ COAX OUT
You can connect digital monitor speakers, recorders, AV amplifiers with this coaxial digital output.
❸ Hi-Z Input
Connect an electric guitar or bass guitar instrument to this unbalanced 1/4” TS connector. ❹ LINE OUT
Only unbalanced 1/4” phone jack cable is suitable for this Hi-Z input These output connectors are balanced 1/4” TRS type sockets, which can be connected to any mixing
board, power amplifier, powered studio monitor, recorder or any other stereo unbalanced line-
❹ Headphone connector level inputs.
This is where you connect stereo headphones with a 1/4” stereo TRS jack plug.
2.3 Top panel
❺ Headphone volume control knob
The volume knob controls the headphone output amplifier. The headphone amplifier is quite powerful, 1) MIC / Hi-Z Peak LED
so use the maximum setting with extreme caution The Peak LEDs illuminate red, if the input signal is over
the clipping point. If the red peak LED lights up
frequently or stays lit for any period of time, lower the
input gain level with the input gain control knob to
avoid unwanted distortion.
2) +48V Phantom power LED
This red LED provides visual feedback about the status
of phantom power.
ENGLISH
ENGLISH
3) Power LED
The power LED illuminates red if AMON SE and your
computer are connected properly
<Hi-Z connection>
ENGLISH
Note: Make sure to check both the XLR cable
and condenser microphone are connected
properly, before turning on the phantom power
<XLR cable connection> switch.
In this chapter, we are going to explain how to install the driver and control panel for AMON SE on your PC. 4.3 Control panel
If you encounter any problem or difficulty during the software installation, please feel free to contact
our support team at da-support@samick.co.kr Also please visit our website for the latest driver for your 1) AMON SE Logo
convenience. www.infra-sonic.com AMON SE logo changes if AMON
SE is connected to the computer
4.1 Windows® Driver Installation properly.
1) Please insert the enclosed driver disc into your optical drive. Open ‘Driver\AMON SE_DRIVER_WIN’ 2) Monitoring
folder and double click the ‘Setup’ file for installation. Simply follow the displayed instructions to Enables analog zero latency
complete the rest of installation process. monitoring of the Microphone
and/or Hi-Z inputs.
NOTE: Please select the proper driver version according 3) Volume faders
to your Windows® version Control the volume level of Inputs
& Outputs.
2) Please select ‘Next’ for starting the installation
3) Please select the destination folder location. 4) Indicator
Indicates the volume level
(Default folder is recommended) settings.
4) Installation will be complete after clicking ‘Finish’
5) Mute
Mutes the selected channel.
6) Link
If you enable the link button,
volume faders are connected
and can be move together.
7) Latency bar
Adjust the latency of AMON SE. The lower the latency, the more real-time the audio output appears to
be, but the audio performance is strongly related to the PC’s processing power. As a rule of thumb, make
sure, that the latency of AMON SE is set higher than the average DPC latency of your computer to avoid
digital noise in the audio signal flow.
8) Stereo Mix
This feature enables AMON SE to mix down all outputs from different audio applications and record it at
once just as you hear it on the outputs of AMON SE, hence the Stereo Mix feature is also called “What
you hear”. It is especially useful in podcasting.
4.2 OS X Driver Installation
1) Please insert enclosed driver disc into your optical drive. Navigate to the ‘Driver\AMON SE_DRIVER_
MAC’ folder and double click ‘Infrasonic_AMON SE_Driver_*.*.*.dmg ‘ file, which creates a new AMONE
SE control panel icon.
2) The new folder and icon of AMON SE will be created automatically and the control panel can be started
after clicking the AMON SE icon.
ENGLISH
ENGLISH
6 AMON SE OWNER’S Manual – 7
5. FAQ 5. FAQ
<STEREO MIX>
ENGLISH
value.
ENGLISH
10 AMON SE OWNER’S Manual – 11