An experiment was conducted to help evaporation of pond water using mesh screens. Six basins were prepared and 150mL of brine was added to each. Materials like mesh screens, beakers, and a salinometer were used. Every 20 minutes, the brine in five of the basins was poured over the screens while evaporation was measured. Final volumes and salinities were recorded. The basin with a 100 holes per square inch mesh screen had the least evaporation at 25mL while the uncovered basin lost 45mL. Further testing was recommended.
An experiment was conducted to help evaporation of pond water using mesh screens. Six basins were prepared and 150mL of brine was added to each. Materials like mesh screens, beakers, and a salinometer were used. Every 20 minutes, the brine in five of the basins was poured over the screens while evaporation was measured. Final volumes and salinities were recorded. The basin with a 100 holes per square inch mesh screen had the least evaporation at 25mL while the uncovered basin lost 45mL. Further testing was recommended.
An experiment was conducted to help evaporation of pond water using mesh screens. Six basins were prepared and 150mL of brine was added to each. Materials like mesh screens, beakers, and a salinometer were used. Every 20 minutes, the brine in five of the basins was poured over the screens while evaporation was measured. Final volumes and salinities were recorded. The basin with a 100 holes per square inch mesh screen had the least evaporation at 25mL while the uncovered basin lost 45mL. Further testing was recommended.
An experiment was conducted to help evaporation of pond water using mesh screens. Six basins were prepared and 150mL of brine was added to each. Materials like mesh screens, beakers, and a salinometer were used. Every 20 minutes, the brine in five of the basins was poured over the screens while evaporation was measured. Final volumes and salinities were recorded. The basin with a 100 holes per square inch mesh screen had the least evaporation at 25mL while the uncovered basin lost 45mL. Further testing was recommended.
Materials: 5 pcs 1/4 Thick 6 basins Mesh Screen Beaker Graduated Cylinder Salinometer Objectives: To help the evaporation of pond/salt bed in PFI Weather: 100% Cloudy Procedure: step 1- I start at 9:00 am up to 4pm step 2- Prepare 6 empty basins step 3- Put 150mL of brine(10be) on the basins step 4- After putting the brine on the basins, put all the materials needed on the basins step 5- Then every 20 mins, we need to pour the sponge by brine(basin 2, 3, 4, 5 and 6) step 6- Repeat step 5 till 4pm step 7- Then get the final volume and salinity of each basin with the help of Beaker, Graduated Cylinder and Salinomete
Initial Volume(mL) Final Volume(mL) Total Net Evaporation(mL) Basin 150 105 45 1pc. 1/4 thick SH 150 90 60 1pc. 1/4 thick SH w/ mesh 100 150 125 25 1pc. 1/4 thick SH w/ mesh 150 150 125 25 1pc. 1/4 thick SH w/ mesh 30 150 105 45 1pc. 1/4 thick SH w/ mesh 60 150 110 40
Whats Next? Try the next step give by GCK
aduated Cylinder and Salinometer
Column8 Column9 Pouring time
otal Net Evaporation(mL) 9:20 AM 9:40 AM 10:00 AM 10:20 AM 10:40 AM 11:00 AM 11:20 AM 11:40 AM 1:20 PM 1:40 PM 2:00 PM 2:20 PM 2:40 PM 3:00 PM 3:20 PM 3:40 PM