Professional Documents
Culture Documents
TL Hydro Extractor
TL Hydro Extractor
TL Hydro Extractor
Many thanks for your trust and purchasing our TL series hydro extractors,
wish you have happy life. To get the best performance and keep safe,
operating them.
The equipment must have neutral line! Make sure that the direction of
1. Introduction
TL series hydro extractors are mainly suitable for most kinds of fabric
to match with industrial washing machine. It’s used for drying some small
parts, and separate particles and coarse particle suspension which needs
1
Shanghai Flying Fish Machinery Manufacturing Co., Ltd.
high spin speed and dehydration rate is high, and without any damage to
2. Structural features
spin speed and high dehydration rate, without any damage to the
dehydration object.
This product is equipped with brakes, and can make solid brake.
3.1. Unpacking: when unpacking, user should check whether the machine
foundation, flat, dry and ventilated place with power. Connecting the
try to check direction of rotation of the it. Note: machine must be run in
2
Shanghai Flying Fish Machinery Manufacturing Co., Ltd.
same direction with the "rotation" sign, that is, looking down along
3.3. The foundation: the concrete foundation depth should be not less
than 400mm, buried three foot screws, the specific size shown in Figure 1.
Model NO. L D
4.1. Connect power and operate. The operation should be directed to meet
well, turn off the power, intermittent braking, make the rotation of the
dewatering drum brake gradually. Please clean the drum before use.
them evenly.
3
Shanghai Flying Fish Machinery Manufacturing Co., Ltd.
4.4. Turn off the power, intermittent control braking backhand, in order to
4.5. Filter suspension and dehydration of small parts may be lined with
4.7. It’s strictly prohibited to add or take drying material in the rotary
5.1. The shell should be kept clean, wipe with a soft cloth test case, if the
5.2. Completion of each use, drain off the water, rinse the drum to prevent
5.3. When the machine is in use for half year, the components should be
NATRIUM GREASE, and adding the grease with injection gun. The
grease should be strict inspections, shall not contain any other impurities.
4
Shanghai Flying Fish Machinery Manufacturing Co., Ltd.
Inject Grease
Its bearings must be
periodically refueled
( NATRIUM GREASE ). At
first, clockwise open the spin
bucket cap, then make gun aim
at the central axis nozzle
inject grease into the bearings,
at last close the cap.
5.6. Long time no use, keep the machine dry, and keeping a good and
parts warranty for six months. Users are welcome to give valuable
advice.