Professional Documents
Culture Documents
ChuangDaJacquard Instruction English
ChuangDaJacquard Instruction English
ChuangDaJacquard Instruction English
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
1 CONTENTS
1 CONTENTS ...................................................................................................................................................................... 2
2 BRIEF INTRODUCTION................................................................................................................................................. 4
3 REQUIREMENTS OF SOFTWARE OPERATION ........................................................................................................ 4
4 INTERFACE STYLE ........................................................................................................................................................ 5
5 MAIN FUNCTIONAL MODULE .................................................................................................................................... 6
5.1 Software Installation .................................................................................................................................................... 6
2 5.2 Drawing Design ........................................................................................................................................................... 7
5.2.1 Create a new file ............................................................................................................................................... 7
5.2.2 Open Bitmap\CCMD File ................................................................................................................................. 7
5.2.3 Open WAC File ................................................................................................................................................ 7
6 TOOL BAR ICONS .......................................................................................................................................................... 8
6.1 Drawing Tool............................................................................................................................................................... 8
Region Selection ........................................................................................................................................................ 8
Color Picking ............................................................................................................................................................. 8
Eraser ......................................................................................................................................................................... 9
Pencil Tool ................................................................................................................................................................. 9
Straight Line Tool ...................................................................................................................................................... 9
Curve Drawing .......................................................................................................................................................... 9
Hollow Rectangle .................................................................................................................................................... 11
Solid Rectangle ........................................................................................................................................................ 11
Hollow Rectangle with Rounded Corners ............................................................................................................... 11
Solid Rectangle with Rounded Corners ................................................................................................................... 11
Hollow Ellipse ......................................................................................................................................................... 11
Solid Rectangle ........................................................................................................................................................ 12
Hollow Rhombus ..................................................................................................................................................... 12
Solid Rhombus. ....................................................................................................................................................... 12
Filling in color. ........................................................................................................................................................ 12
Text Tool .................................................................................................................................................................. 13
Color Switching ....................................................................................................................................................... 13
Magnifying glass ..................................................................................................................................................... 14
Pattern Copy ............................................................................................................................................................ 14
Copy pattern change ................................................................................................................................................ 17
Pattern Angle Rotation Copy ................................................................................................................................... 21
Hand ........................................................................................................................................................................ 22
6.2 Icons in Normal Tool Bar .......................................................................................................................................... 23
New ......................................................................................................................................................................... 23
Open ........................................................................................................................................................................ 23
Save ......................................................................................................................................................................... 24
Undo\ Redo.............................................................................................................................................................. 24
Sliver Knitting ......................................................................................................................................................... 24
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
SingleJacquard......................................................................................................................................................... 25
TopBottomJacquard ................................................................................................................................................. 25
Yarn Jacquard .......................................................................................................................................................... 25
Sweater Jacquard ..................................................................................................................................................... 31
HorizontalMirror / VerticalMirror / ArbitraryAngleRotation .................................................................................. 32
Change the size of pattern ....................................................................................................................................... 32
Clip .......................................................................................................................................................................... 32
Rows, Columns Color Conversion .......................................................................................................................... 32
Rows Color Conversion........................................................................................................................................... 33
Columns Color Conversion ..................................................................................................................................... 34
3
Pattern Preview ........................................................................................................................................................ 34
Bitmap color conversion .......................................................................................................................................... 35
6.3 Setting Box ................................................................................................................................................................ 36
7 MENU BAR .................................................................................................................................................................... 36
7.1 File ............................................................................................................................................................................. 36
7.2 Regional Edit ............................................................................................................................................................. 37
7.3 View........................................................................................................................................................................... 37
7.4 Color Processing........................................................................................................................................................ 38
7.5 Window ..................................................................................................................................................................... 39
7.6 Help ........................................................................................................................................................................... 40
8 AFTER-SALES SERVICE.............................................................................................................................................. 40
After-sales service website: ............................................................................................................................................. 40
9 The new version modifications........................................................................................................................................ 41
V3.3.3 (20150906).................................................................................................................................................. 42
1 Add The Display Mode ................................................................................................................................... 42
2 Modify The Function Of The Font .................................................................................................................. 43
3 Add “Regional Mirror”,” Regional Rotate” .................................................................................................... 44
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
2 BRIEF INTRODUCTION
Respectful Clients, thank you very much to use the special jacquard system
software of computer jacquard designed by Foshan Chuangda Enterprise Co., Ltd.
Before installing and using the software, please read the manual so as to
understand how to correctly install and use the jacquard software.
The software is easy to operate and is convenient to create and alter patterns,
4
automatically generating various weaving process diagrams. Currently, it has
integrated functions of most popular jacquard software.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
4 INTERFACE STYLE
The Jacquard software is the graphic operation software developed on Microsoft Windows
Operating System. It consists of pull-down menu, pop-up menu, tool bar menu, drawing area,
instruction column, etc. The interface is visual and operation is easy, as showed in the
following Figure4-1.
Menu Bar
5
Tool Bar
WorkSpace
Figure 4-1
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Figure 5-1
If during the installation process appears as showed in Figure 5-2, you may need to
download the .Net environment.( Instal file name is "dotNetFx40_Full_x86_x64. Exe", as
showed in Figure 5-3)
Figure 5-2
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Figure 5-3
5.2 Drawing Design
5.2.1 Create a new file
Click the icon , according to the Figure 5-4 prompted to create a new drawing area.
7
Figure 5-4
Click the icon , can choose to open the BMP plan or CCMD File.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Region Selection
Move the cursor to the starting point of a selected area, click the left button of the mouse
and do not release the button, then move the cursor to the end point of the selected area and
8 release the button. Set selected area to compile (copy, paste, cut, etc.). As the Figure 6-1,
when you drag the frame, you can see the cursor location and selected area. If you use the
right button, you can get the same effect.
Selected size
Selected area
Figure 6-1
Color Picking
The function is used to pick a certain color in the Figure to set foreground color or
background color. As showed in Figure 6-2, firstly click the foreground color or background
color in the right setting box.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
9
Figure 6-2
Eraser
Use left button to click an icon and keep the left button to eliminate the corresponding part.
Attention: The eliminated color is background color.
Pencil Tool
Click mouse and use the current color to freely draw a point or curve. If click for one time,
it is one pixel. If keep pressing the left button and move the mouse, you can draw a
continuous line segment. Release the left button after reaching target location.
Curve Drawing
The drawing of the curve consists of three steps:
First step: keep pressing the left button and move the cursor to the destination point. At the
moment, a straight line in the area will appear, as showed in Figure 6-3.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
10
Figure 6-3
Second step: at the same time, click the left button of the mouse and move the curve to a
target location, as showed in Figure 6-4.
Figure 6-4
Third step: click on the left button of mouse and move the curve to another target location,
and the result is shown in Figure 6-5. The color of curve is forefront color.
Figure 6-5
Utilize right button to conduct similar operation, then you can also get the corresponding
curve. The curve color is background color.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Hollow Rectangle
Press the left button of the mouse to define a vertex of a rectangle. Move cursor along
the direction of expected diagonal line and release the mouse to finish
rectangle. The rectangle color is forefront color. If utilize right button to conduct the same
operation, you can also draw a rectangle. The rectangle color is background color.
11 Solid Rectangle
Press the left button of the mouse to define a vertex of a rectangle. Move the cursor
along the direction of expected diagonal line. Release the mouse to
finish a solid rectangle. The color of rectangle frame is forefront
color and the color inside the frame is background color. If use right button to
conduct similar operation, you can also draw a solid rectangle. The color
is opposite to the color drawn by left button (the frame color and inside color
exchange)
Hollow Ellipse
Press the left button of the mouse to define a vertex of the ellipse. Move the cursor along
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
the direction of expected diagonal line. Release the mouse to finish ellipse. The ellipse
color is forefront color. If use right button, you may also draw an ellipse, and the
ellipse color is background color.
Solid Rectangle
Press the left button of the mouse to define a vertex of an ellipse. Move the cursor along the
direction of expected diagonal line. Release the mouse to finish a solid ellipse. The frame
12 color of the ellipse is forefront color and inside color is background color. If use right
button to conduct similar operation, you can also draw a solid rectangle, and the color is
opposite to the color drawn by the left button.
Hollow Rhombus
Press left button of mouse to define a vortex of rhombus. Move the cursor along the
direction of expected diagonal line. Release the mouse to finish rhombus. The rhombus
color is forefront color. If use right button to conduct the same operation, you can also draw
a rhombus. The rhombus color is background color.
Solid Rhombus.
Press left button of mouse to define a vortex of rhombus. Move the
cursor along the direction of expected diagonal line. Release the mouse to finish a solid
rhombus. The rhombus frame color is forefront color and inside color is background
color. If use right button to conduct the same operation, you can also
draw a solid rhombus. The rhombus color is opposite to the color drawn by the
left button.
Filling in color.
Specify background color. Seal color area to fill in color.
Note:If the side boundary of the object is not continuous, the filling-in color will spread to
other drawing area. Find out the breaking point and seal it up.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Text Tool
After selecting text input, click left button to select the location where to type in text, then
the system will automatically switch to the text input box. Click “font functions” to set the
standard font and font line.
Color Switching
13 Set forefront color. Click color switching. Select the desired color in drawing area. Figure
6-6 will show.
Figure 6-6
Click on the corresponding function can be selected color replacement into foreground color
or background . (left mouse button click on the drawing area ----- replaced with the
foreground color, click the right mouse button color ---- replace the background color)
Color change in addition to draw in the whole area, also can undertake areas of color
transformation.You can choose the “Region Selection” to select the region (as Figure
6-7),and then use the “Color Switching” to change the color.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
14
Selected area
Figure 6-7
Magnifying glass
Graphic zooming in or zooming out. After clicking the icon, click left button in certain area
of the icon (use cursor as center). For each click of the left button, the picture will zoom in
by 100%, until the final ratio is 50:1. For each click of the right button, the picture will
shrink by 50%, until the final rate is 0.1: 1.
Note: mouse wheel may also be used for zooming in and zooming out.
Pattern Copy
After moving the cursor to the start point of a picture, keep pressing the left button, move
the cursor to the end point, then release the left button. Set selected an area. After selecting
area, move the cursor in a selected area, then the cursor will become shape. Press the
left button of the mouse to set the area to specify area, then release the left button. Figure
6-8 will show.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
15
Figure 6-8
1.Copy All ----- All the selected area of graphics, copied to the target area, as showed in
Figure 6-10;
2.Copy the source image area with a jacquard part ---- The color which is not black of the
select area will be copied to target area, as shown in Figure 6-11;
3.Copied to the target area without jacquard part ---- Copy the source image to the black
part of the target area, as showed in Figure 6-12.
NOTE: “Jacquard part” means the part which color is not black in the bitmap.
The source image:
Copy area
(source area)
Paste area
(target area)
Figure 6-9
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Graphics for different paste options:
1. Copy All
16
Figure 6-10
Figure 6-11
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
3. Copied to the target area without jacquard part
17
Figure 6-12
Copy area
Figure 6-13
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
18
Paste area
Figure 6-14
As showed in the Figure 6-14,when the “Copy Type” is “Copy All” and the “Turn” is
NULL,select different paste types in size options,it will be different results.As showed in
Figure 6-15,6-16,6-17.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
“1:1”
19
Figure 6-15
“Match”
Figure 6-16
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
“Repeat”
20
Figure 6-17
However, when the “Copy Type” is “Copy All” and the “Size” is “Match”,if “Horizontal” is
checked ,the image will be changed,as showed in Figure 6-18,else if “Vertical” is checked
is checked,the image will be changed, as showed in Figure 6-19.
“Horizontal”
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
21
Figure 6-18
“Vertical”
Figure 6-19
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Move the mouse to the end point of the Figure, then release the left button. Set selected an
area. After selecting area, move the cursor to select area, and the cursor will become . Press
the left button to move the area to specify place. Release the left button . Figure 6-20
will show. Type in angle and click “confirm”. The effect is shown in Figure 6-21.
22
Figure 6-20
Pasted image
Copy
Hand
In the drawing area using the item, hold down the left mouse button, move the mouse,
drawing area to follow the movement, easy to preview graphics.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
6.2 Icons in Normal Tool Bar
New
23 The new filename is “new establishment”. You may name the pattern and set the size. When
set the size, you may select the dimension provided by system or specify the size according
to requirements.
If you intend to change the background color of the pattern, type in 0-9 in the edit box of the
initial box and select the desired color. The effect is shown in Figure 6-22.
Figure 6-22
Open
The software support bitmaps of various formats, which are easy to alter. And also support
“.ccmd” format project files.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Save
Save current file or project.
Undo\ Redo
Undo
24 Cancel the operation of the current Figure. Click on one time, the system cancel one step.
The default is 4 times.
Redo
Recover the cancelled operation. Click on one time, then recover one step. The recovery
times are the same with cancellation times.
Sliver Knitting
This function is mainly used for "1 by 1" of the original image.
A\B\C\D means the different color of yarns.
“S”---- This is effective, when the colors appear in the odd columns.
“D” ---- This is effective, when the colors appear in the even columns.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
25
Figure 6-23
After the completion of the 1X1 processing, directly click on one of these three icons
SingleJacquard
TopBottomJacquard
Yarn Jacquard
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Click on the three button and one of them will appear as follows the window.
26
Figure 6-24
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
27
Figure 6-25
Figure 6-26
“Yarn X” is the number of the “Yarn Circulatingcount”.
Double click the color box on the color can make the color selected to form, specific
operation is as follows:
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
If you don't need a color, you can double click on the color of the grid.
28
“Function” grid:
Default : The color you choose will appear
in the row.
Loop : All the color in the source image row
will appear in the row.
Tuck : Base on the “Default”,and according
to the rules of „A‟ and „B‟(as show in the
Figure 6-28) to add “Tuck color”.
Welt: This row will be full of gray color.
Figure 6-27
Figure 6-28
Figure 6-29
All of the decomposition windows are provided "normal decomposition"and "Panchromatic
Not Decomposition" ,but only ” Yarn Jacquard” is provided “Panchromatic Not
Decomposition (optimization)”.
"Panchromatic Not Decomposition" ---- when a line on the source map is monochromatic, it
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
does not decompose.
“Panchromatic Not Decomposition (optimization)”---- After the "Panchromatic Not
Decomposition" , the graph does not contain a line that is “welt”.
3-Functionposition Mode:
29
Figure 6-30
When the “Tuck” in the Figure 6-30 is checked, the "3-functionposition mode" will work.
When all settings are set, you can click on the button ,and then click the button
to output the Jacquard file.
This is the result of two different sets of parameters:
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
The Parameters of “Result 1”(Figure 6-32):
Yarn 1: color—number 4,Function—Tuck(A:1,B:4)
Yarn 2: color—number 5,Function—Default
Yarn 3: color—number 7,Function—Default
Decomposition Mode: “0:Normal Decomposition”
3-Functionposition Mode: NULL
30
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
31
Figure 6-33(result 2)
Sweater Jacquard
After clicking the button , if you want to choose function for certain colors in the
Color combination in
Select the Yarn-color of
the original image
Select the function of the color combination
the Color that one of
the "Yarn x"
Figure 6-34
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Clip
After selecting an area, the icon is activated and bright. Click the icon and clip it. Figure size
the size of clipping area.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
33
Figure 6-36
As show in Figure 6-36,the color will instead of the color .
Therefore,after setting the rule(as the Figure 6-36),you can click on your work space,and
then click the icon to complete the color conversion.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
34
Figure 6-38
Pattern Preview
As Figure 6-40, after setting the parameters, can be detected by X direction, Y direction, X-Y
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
direction of preview bitmap. You can also use the shortcut keys X/Y/X-Y.
35
Figure 6-40
Figure 6-41
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
6.3 Setting Box
The setting box includes line style, forefront color, background color, and color palette.
Line style: during drawing, you can select the thickness of line, which includes four levels:
1-4 pixels. The style of line includes dot dash line, imaginary line, etc.
Forefront color/background color: the two colors decide the line color of drawing and
filling-in color of a closed Figure.
Palette: Includes 10 primary colors. When loading a new Figure, the new color automatically
36 and orderly add into the palette back according to color amount, as showed in Figure 6-42.
Line style
Palette
Figure 6-42
7 MENU BAR
7.1 File
Including new establishment, open, close, save, import, print, etc., as showed in the
following Figure.
The new establishment, open, saves functions are the same with the conventional tool bar.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Import CMD format function, which can open Chuangda‟s exclusive document format,
including exploded view. Import WAC format, which can open WAC format pattern. WAC
products are applicable to the machine.
37
7.3 View
The view function bar can show/conceal tool bar, status bar, tool kit, and setting box. You
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
can also switch the length units of picture, including pixel, inch, and mm.
38
7.4 Color Processing
The menu is applicable to reduce colors of the bit map. The pop-up window is shown as
follows:
The bitmap includes three colors. In order to change it into two colors, conduct the following
operations. Click the left color block, then click right black color block. In this way, the left
color block will be copied to right side, which means the color will be saved. The effect is
shown in the following Figure. In order to cancel the right color, double click it.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
39
7.5 Window
You can operate several windows at the same time.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
7.6 Help
You can choose the language of the software, just click on the corresponding button, and
then restart the software, you can achieve the language of the switch.
40
8 AFTER-SALES SERVICE
Guangdong Chuangda Automatic Equipment Co.,Ltd. provides the most perfect service,
for more information about the latest developments of the products of the company,
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
Fax Tel.: +86-0757-82622156
E-mail: sales@fscd.cn
City FJ Province
Zhejiang Province.
Contact person:
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
42
NOTE: Select “Symbol mode 1” or “Symbol model 2”, If zoom value is higher than
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
will be displayed in “Default Mode”.
You can also use keyboard to convert the display mode,the shortcut key is Space
key.
43
2 Modify The Function Of The Font
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156
Guangdong Chuangda Automatic Euipment Co.,Ltd.
44 The font color is foreground color ,when the foreground color is black,the font color is
white.
Address: Building D11, New Light Source Base, Luocun Avenue(Langsha), Nanhai District, Foshan City,
Guangdong Province
Tel.: 0757-82629566 82629546 Fax: 0757-82622156