Professional Documents
Culture Documents
Mechanical Filter Data Sheet
Mechanical Filter Data Sheet
Pre- and final filter for particle removal from aqueous solutions, water and other liquids, as well as gases, with an absolute retention rate.
Product description: The ultramesh filter consists of a regenerable stainless steel mesh, with stainless steel outer guard and endcaps. The retention rate extends from 5 m up to 250 m. Features: The ultramesh filter element offers an especially economical pre- and final filtration, where the stainless steel mesh can be regenerated by ultrasonic bath or back flushed. This is especially important at higher particle loads. The contact points of the mesh material are welded firmly together, which guarantees a constant pore diameter, even under extreme operating conditions. The heavy-duty construction of the ultramesh filter is also suitable for high-viscosity liquids and can withstand a differential pressure of up to 75 psid. In addition, the filter can be used for temperatures up to 400F.
Technical alterations reserved (Date 10/00)
The ultramesh P-SM regenerable stainless steel mesh filter for liquid media
Applications: The ultramesh stainless steel filter is designed and developed for the following applications: Water filtration Chemicals Solvents Pharmaceutical industry Food and beverage Syrup Cosmetics Paints Salt- and Seawater Coolants Compressed air an other gases
inc. 3560 Engineering Drive Atlanta Technology Park Norcross. GA 30092 Phone 1-770-448-3363 Fax 1-770-448-3854
ultramesh P-SM
Features: Filter media, outer guard and endcaps are made of stainless steel Heavy-duty construction Welded contact points of the filter media Multi layered stainless steel mesh media Available in 13 sizes Multiple regeneration with ultrasonic bath All stainless steel construction Backflushable Benefits: Good durabilty against most liquids and gases Can also be used for high-viscosity liquids Constant pore diameter under all operating and process conditions Absolute retention rate from 5 m up to 250 m Optimum filter size for the individual application Minimum filtration costs, especially at high contaminant load Temperature range from 60F up to 400F * In-line-installation, ease of operation
Technical data
Materials: Filter media: Stainless steel mesh 304 Inner core: SS 304 Endcaps: SS 304 Bonding material: Plastic steel* O-Rings: EPDM**
* > 300F welded endcaps ** Silicone, Buna N, Viton, Aflas or Kalrez on request
Filtration surface:
1
Dimensions:
Element size A inch B inch C nominal o.d. witdh D inch CF
03/10 04/10 04/20 05/20 05/25 07/25 05/30 07/30 10/30 15/30 20/30 30/30 30/50
3 4 4 5 5 7 5 7 10 15 20 30 30
0.5 0.5 0.55 0.55 0.55 0.55 0.6 0.6 0.6 0.6 0.6 0.6 0.6
1.2 (3/4) 1.2 (3/4) 1.5 ( 1) 1.5 ( 1) 1.5 ( 1) 1.5 ( 1) 2.5 ( 2) 2.5 ( 2) 2.5 ( 2) 2.5 ( 2) 2.5 ( 2) 2.5 ( 2) 3.6 ( 3)
1.65 1.65 2 2 2.44 2.44 3.4 3.4 3.4 3.4 3.4 3.4 5.5
0.12 0.17 0.19 0.25 0.32 0.47 0.46 0.68 1.00 1.55 2.10 3.28 5.89
5
0.11 7.5
m
25 m
0.029 2.0
5 m
50
0.022 1.5
25
Differential pressure
Differential pressure
0.07 5.0
m 50
0.015 1.0
100 m
0.04 2.5
100 m
0.007 0.5
0 0
5 2
10
15 4
20 6
25
30 8
35 10
40
45 12
50
m3/h cfm
inc. 3560 Engineering Drive Atlanta Technology Park Norcross. GA 30092 Phone 1-770-448-3363 Fax 1-770-448-3854
l/min GPM
0 0
20 10 20
40 30
60 40
80 50
100 60
120 70