PE Zks20 A
SIEMENS 212 products
CERTIFICATE OF CONFORMANCE
Part Number: W3T262280 Serial Number: 2132325
Mode! Number: IP-VNX55EP-2 Date Tested: 4/19/2013
‘The above stated Model/Part Number is certified to have been manufactured and tested in accordance with
both an ISO 9001 and 14001 registered Quality and Environmental Management System and all the
requirements specified in Siemens Manufacturing Work Instruction MFG-O85.
APPLICALBE TEST PROCEDURE ACCEPTANCE CRITERIA PASSED TEST
1) Pressure Test (MFG-048) 100 psifor = 12 hours - Leak Free w
| 2) Rinse up Test (MFG-048 ) 4oMOhm-cm in s 12 hours a
Electrical Resistance test (MF141ST) = 50. ohms w
ca
4) Polarity/ wiring inspection (MF 14187) Verity connections
ig
fe
IS
iz
Io
APPLICABLE STANDARDS
4) Asbestos /Lead Free (RoHS Compfiant)
2) Wetted Materials- meet FDA requirements for food contact applications (21 CFR)
3) EN 60204-1 Safety of Machinery - Electrical Equipment of machines Part 1: General Requirements
4) Low Voltage Directive (LVD) 200695/EC
ye o@
&
| 8) This moder has also been certifed HALAL
‘The manual for the above component can be found on: www.jonpure.com
‘Should you need further assistance, please E-mail: mary.qrenier@siemens.com
We value you as our customer and will accommodate you in whatever way to provide total satisfaction.
Sincerely,
acbicct., flaget
“Ratu Bhagat 180 GA Mgmt Rep.
‘Semens inst ne -onpure Products
“Manufactired in Lowell, MAO1851, USA” Tress RevPB 1365208
Boer
SIEMENS tnpue Product
_ CERTIFICATE OF CONFORMANCE
Part Number: W37T262280 Serial Number: 2132315
Model Number: IP-VNXS55EP-2 Date Tested: 4/18/2013
‘The above stated Model/Part Number is certified to have been manufactured and tested in accordance with
both an ISO 900t and 14001 ragistered Quality and Environmental Management System and all the
requirements specified in Siemens Manufacturing Work Instruction MFG-088,
| APPLICALBE TEST PROCEDURE, ACCEPTANCE CRITERIA PASSED TEST
1) Pressure Test (MFG-048) 100 psi for = 12 hours - Leak Free wv
2) Rinse up Test (MFG-048 ) 40MOhm-cm in 12 hours w
3) Electrical Resistance test (MF141ST) 5 50 ohms wi
4) Polarity/ wiring inspection (MF 141ST) Verify connections a:
| APPLICABLE STANDARDS CONFORMS
1) Asbestos /Lead Free (RoHS Compliant) vw
2) Wetted Materiais- meet FDA requirements for food contact applications (21 CFR) a
' 3) EN 60204-1 Safety of Machinery - Electrical Equipment of machines Part 1: General Requirements wy
4) Low Voltage Directive (LVD) 2006/95/EC a
5) This model has also been certified HALAL wi
‘The manual for the above component can be found on: www.ionpure,com
‘Should you need further assistance, please E-mail: mary. jes
We value you as our customer and will accommodate you in whatever way to provide total satisfaction.
‘Slomons Industry ne onpure Products
“Manufactured in Lowell, MA 01851, USA” ~ LF188S Rov NPB 13 65204
3103,
SIEM ENS . / tonpure? Products
CERTIFICATE OF CONFORMANCE
Part Number: W3T262280 Serial Number: 2132331
Model Number: IP-VNXS5EP-2 Date Tested: 4/19/2013
‘The above stated Model/Part Number is certified to have been manufactured and tested in accordance with
both an ISO 9004 and 14001 registered Quality and Environmental Management System and all
requirements specified in Siemens Manufacturing Work Instruction MFG-085.
| APPLICALBE TEST DURE ACCEPTANCE CRITERIA PASSED TEST
1) Prossure Test (MFG-048) 100 psi for = 12 hours - Leak Free w
2) Rinse up Tost (MFG-048 ) 40MOhm-cm ins 12 hours a
|3) Electrical Resistance test (MF14iST) $50 ohms ¥
| 4) Polerity/ wiring inspection (MF141ST) Verity connections ws
_- £3 ae . _. )
APPLICABLE STANDARDS CONFORMS
4} Asbestos / Lead Free (RoHS Compliant) ¥
2) Wetted Materials- meet FDA requirements for food contact applications (21 CFR) Cl
3) EN 60204-1 Safety of Machinery - Electrical Equipment of machines Part 1: General Requirements ¥
4) Low Voltege Directive (LVD) 2006/95/EC w
5) This modo! has also been certified HALAL 3]
‘The manual for the above component can be found on: www,tonpure.com
‘Should you need further assistance, please E-mail: mary.grenier@siemens.com
We value you 2s our customer and will accommodate you in whatever way to provide total satisfaction.
Sincerely,
‘Siemens Industry ne onpore Products
“tlanutfactored in Lowell, MA 04281, USA” ‘LFIG5S Rev N(B136520
Jiey
SIEM ENS ‘onpure® Product
CERTIFICATE OF CONFORMANCE
Part Number: W3T262280 Serial Number: 2132312
Model Number: IP-VNX55EP-2 Date Tested: 4/18/2013
‘The above stated Model/Part Number is certified to have been manufactured and tested in accordance with
‘both an {SO 9001 and 14001 registered Quality and Environmental Management System and all the
requirements specified in Siemens Manufacturing Work Instruction MFG-085.
APPLICALBE TEST PROCEDURE ACCEPTANCE CRITERIA PASSED TEST
1) Pressure Test (MFG-048) 100 psi for= 12 hours - Leak Free Z
2) Rinse up Test (MFG-048 ) 4oMOhm-om in $ 12 hours al
|) Electrical Resistance test (MF141ST) = 50 ohms wz
| 4) Polarity/ wiring inspection (MF 141ST) Verify connections vw
- . ° - “|
APPLICABLE STANDARDS CONFORMS !
1) Asbestos / Lead Free (RoHS Compliant) vw
2) Wetted Matoriais- meet FDA requirements for food contact applications (24 CFR) ch
3) EN 60204-1 Safety of Machinery - Electrical Equipment of machines Part 1: General Requirements ww
Me!
5) This model has also been certified HALAL
&
\ Low Voltage Directive (LVD) 2006/95/EC
‘The manual for the above component can be found on: www.ionpure.com
‘Should you need further assistance, please E-mail: paareni ns.com
We value you as our customer and will accommodate you in whatever way to provide total satisfaction.
Sincerely,
‘Stornens industry in - lonpure Products
“Manufactured in Lowell, MA 01861, USA ~ - Lrtess Rev NPE 1Zhszoh
Diet
SIEM ENS ; lonpure® Products
CERTIFICATE OF CONFORMANCE
Part Number: W3T262280 Serial Number: 2132333
Model Number: IP-VNXS55EP-2 Date Tested: 4/20/2013
‘The above stated Model/Part Number is certified to have been manufactured and tested in accordance with
both an ISO 9001 and 14001 registered Quality and Environmental Management System and all the
requirements specified in Siemens Manufacturing Work Instruction MFG-088.
APPLICALBE TEST PROCEDURE ACCEPTANCE CRITERIA PASSED TEST |
1) Pressure Test (MFG-048) 100 psi for = 12 hours - Leak Fre wl
2) Rinse up Test (MFG-048 ) 10MOhnr-crn in s 12 hours a
|) Eleotricet Resistance test (MF141ST) = 50 ohms a
|s Polatity/ wiring inspection (MF141ST} Verify connections @)
| apeLicaBLE STANDARDS soteonus|
1) Asbestos / Lead Free (ROHS Compliant) w
2) Wetted Materials- meet FDA requirements for food contact applications (21 CFR) oj
3) EN 60204-1 Safety of Machinery - Electrical Equipment of machines Part 1: Generel Requirements 4
4) Low Voltage Directive (LVD} 2006/95/EC w
5) This model has also been certified HALAL wi
‘The manuai for the above component can be found on: www.ionpure.com
‘Should you need further assistance, please E-mail: mary,.qrenier@siemens.com
We value you 2s our customer and will accommodate you in whatever way to provide total satisfaction.
Sincerely,
~ ‘LF106SRevN
“tanutactured in Lowell, WA 185%, USATPG i3bs20 A
4106
SIEMENS lnpur Pfu
CERTIFICATE OF CONFORMANCE
Part Number: W3T262280 Serial Number: 2132311
Model Number: IPNXS5EP-2 Date Tested: 4/18/2013
‘The above stated Model/Part Number is certified to have been manufactured and tested in accordance with
both an ISO 9001 and 14001 registered Quality and Environmental Management System and all the
requirements specified in Siemens Manufacturing Work Instruction MFG-085.
APPLICALBE TEST PROCEDURE ACCEPTANCE GRITERIA PASSED TEST
4) Pressure Test (MFG-048) 100 psi for 12 hours - Leak Free @
2) Rinso up Test (MFG-048 ) 40MOhm-om in s 12 hours w
| 3) Electrical Resistance test (MF141ST) <= 50 ahms wi
° Polarity/ wiring inspection (MF141ST) Verily connections ¥
PPL E STANDARDS CONFORMS
| 1 Asbestos /Lead Free (RoHS Compiler) wa
12) Wetted Materials- meet FDA roquirements far food contact applications (21 CFR) a
3) EN 60208-1 Safety of Machinery - Electrical Equipment of machines Part 1: General Requirements @
4) Low Voltage Directive (LVD) 2008/95/EC wa)
x
5) This model has aiso been certified HALAL
‘The manual for the above component can be found on: www.ionpure.com
‘Should you need further assistance, please E-mail: mary.arenier@siemens.com
We value you as our customer and will accommodate you in whatever way to provide total satisfaction.
Sincerely,
Mae tell
“Raoul Bhagat 180 GA mgmt. Rep.
‘Siemens lncusty nc onpure Products
*Woruractured in Lowell, MA 01861, USAT - - ~ LrI8sS RewPBriZ6s2eoA
J10F
SIEM ENS lonpure® Products
CERTIFICATE OF CONFORMANCE
Part Number: W3T262280 Serial Number: 2132340
Model Number: IP-VNX55EP-2 Date Tested: § — 4/22/2013
‘The above stated Model/Part Number |s certified to have been manufactured and tested in accordance with
both an 10 9001 and 14001 registered Quality and Environmental Management System and all the
requirements specified in Siemens Manufacturing Work instruction MFG-085.
APPLICALBE TEST PROCEDURE ACCEPTANCE CRITERIA PASSED TEST
1) Pressure Test (MFG-048) 100 psifor = 12 houre - Leak Froe w
2) Rinse up Test (MFG-048 ) 4OMOhm-cm in = 12 hours a
[9 Electrica! Resistance test (MF141ST) = 50 chms Zz
w
4 Polarity/ wiring inspection (MF 14187) Verity connections
APPLICABLE STANDARDS NFORH!
2 This model has also been certified HALAL
CONFORMS
1) Asbestos / Lead Free (ROHS Compliant) %
2) Wetted Meterials- meet FDA requirements for food contact applications (21 CFR) a
3) EN 60204-1 Safety of Machinery - Electrical Equipment of machines Part 1: General Requirements a
4) Low Voltage Directive (LVD) 2006/95/EC a
4
‘The manual for the above component can be found on: www.jonpure.com
‘Should you need further assistance, please E-mail: mary,qrenier@siemens.com
‘We value you 2s our customer and will accommodate you in whatever way to provide total satisfaction.
Sincerely,
Rahoul Bhagat=180 GA Mgmt. Rap.
‘Siemans Industry ne = onpure Products
“Manufactured in Lowell, MA 01887, USA ~ ~~ RFI@5S RevNPB 1365224
“Slog
lonpure® Products
SIEMENS
CERTIFICATE OF CONFORMANCE —
2132301
4/18/2013
Part Number: W3T262280 Serial Number:
Model Number: IP-VNX55EP-2 Date Tested:
‘The above stated Model/Part Number is certified to have been manufactured and tested in accordance with
both an 180 9001 and 14001 registered Quality and Environmental Management System and all the
requirements specified in Siemens Manufacturing Work Instruction MFG-085.
| APPLICALBE TEST PROCEDURE
ACCEPTANCE CRITERIA PASSED
1) Pressure Test (MFG-048) 100 psi for 2 12 hours - Leak Free Z
2) Rinse up Test (MFG-048 ) 40MOhm-om in < 12 hours w
3) Electrical Resistance test (MF141ST) $50 ohms ¥ |
| 4) Polanty/ wiring inspection (MF141ST) Verify connections a
APPLICABLE STANDARDS. CONFORMS |
4) Asbestos /Lead Free (RoHS Compliant) ral
2) Wetted Matorials- meet FDA requirements for food contact applications (24 CFR) o
3) EN 60204-1 Safety of Machinery - Electrical Equipment of machines Part 1: General Requirements wv
4) Low Voltage Directive (LVD) 2006/95/EC z
5) This model has also been certified HALAL 2)
iL -
‘The manual for the above component can be found on: www.ionpure,com
Should you need further assistance, please E-mail: .qrenier@siemens.cor
We value you 2s our customer and wil accommodate you in whatever way to provide total satisfaction,
Sincerely,
‘Stomans Indvsity nc onpure Products
“Manutactared in Lowel, MAG1851, USAT LFTHES Rov N