Professional Documents
Culture Documents
May 2022 Ce Board Exam: Eview Nnovations
May 2022 Ce Board Exam: Eview Nnovations
May 2022 Ce Board Exam: Eview Nnovations
L M
Page 1 of 4
REVIEW INNOVATIONS CE May 2022 V6
A. 374 kN C. 392 kN
B. 385 kN D. 395 kN
0.5 m
18 kN/m
A
D
70mm
C B A
15mm
1.2 m
60mm
E B
10mm
1.6 m
Page 2 of 4
REVIEW INNOVATIONS CE May 2022 V6
12. Determine the vertical displacement (mm) of joint D if the axial
rigidity of member DE is 16 ´ 106 N×mm2. Assume buckling is not a
problem for member DE.
A. 5.0 C. 3.75
B. 4.0 D. 2.25
13. Determine the maximum tensile stress (MPa) at a point at the outside
surface of the shaft.
A. 287 C. 301
B. 293 D. 312
14. Find the maximum compressive stress (MPa) at a point on the outside
surface of the shaft.
A. 66 C. 87
B. 75 D. 98
15. Assuming the shaft will rupture in shear, approximate the angle
(degrees) the primary plane of rupture will make with the
longitudinal axis.
A. 45 C. 61
B. 74 D. 54
Page 3 of 4
REVIEW INNOVATIONS CE May 2022 V6
~o0o~
Nothing Follows
Page 4 of 4