Professional Documents
Culture Documents
Ga132 Comp List
Ga132 Comp List
ZT-LVDB AIF
100 Inlet air filter 1621 0547 00 Mann & Note: GA90-160/GA132-180VSD/GR110-200 (1x)
Hummel GA200-315*/GA315VSD (2x)
GA315-500** (3x)
Type: Dry paper filter
Mat.: Outer and inner zinc plated after perforation
101 Unloading valve Acc. Note Atlas Copco Note: GA 90-315*: 1614 9008 80
GA 90-315*: 1614 9258 80 : option Modulating Control
GA 315-500**: 1621 1299 80 (2x)
GR 110-200: 1614 9008 81
GR 110-200: 1614 9127 80 : option Modulating Control
Mat. Housing: Aluminium Gk Al Si 7 Mg Fe
Spring : Electro galvanised spring steel (DIN 17223-1C) (except GA315-500**)
Duty: To throttle the incoming air when the compressor runs unloaded
To vent the air receiver when the compressor runs unloaded
102 Oil-injected screw Acc. note Atlas Copco Note: GA 90-110: 1616 5288 81
compressor GA 132-160: 1616 5288 81
element GA132-180VSD: 1616 5288 81
GA 200-315*: 1616 5288 81 (2x)
GR 110-200: Stage 1 (low pressure) : 1616 5332 81
Stage 2 (high pressure) : 1616 7098 80
GA315 VSD: 1616 7066 80
GA315-500**: 1616 7066 82 (2x)
Mat.: GA 90-160: Casing: Cast iron GG 20 (DIN 1691)
Rotors: Heat treated steel Ck 35 (DIN 17200)
Seal: GA 90 – 160 RULON F8 1614 9429 00
Seal: GA132-180VSD RULON F8 1614 9822 00
Bearings: Set of NU 315 E - QJ 315
Cylindrical roller bearings SKF NU 315 ECJ
GA 200-315*: Casing: Cast iron GG 20 (DIN 1691)
Rotors: Heat treated steel Ck 35 (DIN 17200)
Seal: FURON : 1614 9506 00
Bearings: Set of NU 315 E - QJ 315
Cylindrical roller bearings SKF NU 315 ECJ
GR 110-200: Casing: Cast iron GG20 (DIN 1691)
Rotors: Heat treated steel Ck 35 (DIN 17200)
Seal rings: SIMRIT 75 FKM/595
Bearings: LP Set of NU 315 E – QJ 315
Cylindrical roller barings SKF NU 315
ECJ
HP Cylindrical roller bearings NU 2308 E
Taper roller bearings (face to face
arrangement 31308
GA315 VSD / Casing: Cast iron GG 20 (DIN 1691)
GA315-500**
Rotors: Male: Heat treated steel Ck 35 (DIN 17200)
GA315VSD: Female: Heat treated steel Ck 35
(DIN 17200)
GA315-500**: Female: Cast iron GGG 30
Shaft seal: GA315 VSD: FURON : 1621 0424 00
GA315-500**: FURON : 1621 2124 00 + 1621
0424 00
Bearings: Outlet : NU 2219 ECP + QJ 219 N2/MAC2M
Inlet : NU 2219 ECP
Duty: Compression
104 Check valve Acc. note Atlas Copco Note: GA 90-315*: 1614 6425 00
GA132-180VSD: 1614 6425 00
GR 110-200: 2252 8155 11
GA 315 VSD: 1611 6502 90
GA 315-500**: 1611 6502 90 (2x)
Name: LEGEND FOR FLOW SHEET 9823 9034 00
ZT-LVDB AIF
106 Air receiver See appr. De Globe Appr.: GA 90-110: CE: 1621 9359 08
DIR-SINGAPORE 1621 9359 05
/ ASME / CHINA:
GA132-160, CE: 1621 9360 08
GA132-180VSD:
DIR-SINGAPORE 1621 9360 05
/ ASME / CHINA:
GA 200-315*, GA 315 VSD: CE: 1621 9361 08
DIR-SINGAPORE 1621 9361 05
/ ASME / CHINA:
GA315-500** : CE: 1621 9361 08 (2X)
DIR-SINGAPORE 1621 9361 05 (2X)
/ ASME / CHINA:
GR 110-200: CE: 1621 9362 08
DIR-SINGAPORE 1621 9362 05
/ ASME / CHINA:
Mat.: 0011 0717 00 Spheroidal graphite iron,ferritic
Spec.: Volume: GA 90-110: 137 l
GA 132-160: 187 l
GA132-180VSD: 187 l
GA 200-315*: 275 l
GA 315 VSD 275 l
GR 110-200: 187 l
GA 315-500**: 2 x 275l
Oil content: GA 90: Approx. 69 l
GA 110: Approx. 75 l
GA 132: Approx. 93 l
GA 160: Approx. 100 l
GA132-180VSD: Approx. 90 l
GA 200-315*: Approx. 137 l
GA 315 VSD: Approx. 145 l
GA 90W-110W: Approx. 63 l
GA 132W-160W Approx. 85 l
GA132-180W VSD: Approx. 85 l
GA 200W-315W* Approx. 113 l
GA 315W VSD: Approx. 120 l
GA 315W-500W** Approx. 240 l
GR 132-160-200 Approx. 100 l
GR 110-200W / GR 110 Approx. 85 l
Max. working temp.: 120°C
Min. working temp.: 0°C
Max. allowable working pressure:
GA 90-500: 15 bar
GA132-180VSD 15 bar
GA 315 VSD 15 bar
GR 110-200: 22 bar
107 Oil separator Acc. note Mann & Note: GA 90-110: 1621 9384 00
element Hummel GA 132-160: 1621 9385 00
GA132-180VSD: 1621 9385 00
GA 200-315*: 1621 9386 00
GA 315 VSD: 1621 9386 00
GA 315-500**: 1621 9386 00 (2x)
GR 110-200: 1621 9387 00
Mat.: Outer, central and inner grating: steel, zinc-electroplated
Spec.: Nominal
capacity:
GA90-110 390 l/s
GA 132-160: 507 l/s
GA132-180VSD: 507 l/s
GA 200-315*: 822 l/s
GA 315 VSD: 850 l/s
Name: LEGEND FOR FLOW SHEET 9823 9034 00
ZT-LVDB AIF
108 Safety valve Acc. note Acc. note Note: Appr.: Press. AC. Partnr. Man.: Inlet
conn.
GA90-110-7.5&8.5 bar CE 11 bar 0830 1008 12 Braukmann G1
GA315-8.5 bar
GA90-110 other than CE, ASME, 15 bar 0830 1008 25 Braukmann G 3/4
7.5 & 8.5 bar CHINA, DIR,
SINGAPORE
GA132-160 7.5 & 8.5 CE 11 bar 0830 1008 13 Braukmann G 1 ¼
bar
GA132-160 other than CE, ASME, 15 bar 0830 1008 18 Braukmann G 1
7.5 & 8.5 bar, CHINA, DIR,
GA132-180VSD SINGAPORE
GA200-250 – 7.5 & 8.5 CE 11 bar 0830 1008 14 Braukmann G 1 ½
bar
GA315-7.5 bar,
GA355-500 – 7,5 & 8,5
bar
GA315-400 – 7,5 & 8,5 ASME, 15 bar 0830 1008 18 Braukmann G 1
bar CHINA, DIR,
SINGAPORE
GA450-500 – 7,5 & 8,5 ASME, 15 bar 0830 1008 19 Braukmann G 1 ½
bar CHINA, DIR,
SINGAPORE
GA200-250 other than CE, ASME, 15 bar 0830 1008 18 Braukmann G1
7.5 & 8.5 bar CHINA, DIR,
GA315-450 – 10 & 13 SINGAPORE
bar
GA500 – 13 bar
GA355-400 – 100 psi
GA355-450 – 125
&150 psi
GA355-500 – 200 psi
GA250-10 bar –100psi- CE 15 bar 0830 1008 19 Braukmann G 1 ½
125psi
GA315-all 60 Hz CE, ASME, 15 bar 0830 1008 19 Braukmann G 1 ½
GA500 – 10 bar CHINA, DIR,
GA450-500 - 100 psi SINGAPORE
GA500 – 125 & 150 psi
GR110-200: CE, ASME, 15 bar 0830 1008 18 Braukmann G 1
13bar/200psi CHINA, DIR,
SINGAPORE
GR110-200: CE, ASME, 22 bar 0830 1008 20 Braukmann G 1 ¼
20bar/290psi CHINA, DIR,
SINGAPORE
GA315VSD CE, ASME, 12 bar 0830 1008 17 Braukmann G 1 ½
CHINA, DIR,
SINGAPORE
Spec.: All valves have a lifting device
Duty: To safeguard the pressure circuit
109 Minimum pressure Acc. note Atlas Copco Note: GA 90-160: 1614 6476 80
valve GA132-180VSD: 1614 6476 80
GA 200-315*: 1614 7274 80
GA 315 VSD: 1614 7274 80
GA 315-500**: 1614 7274 80 (2x)
GR 110-200: 1614 7521 80
Mat.: Valve housing 0011 0717 00
Piston: Aluminium Gk Al Si 10 Mg wa (DIN 1725)
Compr. spring: X 12 Cr Ni 17.7
Check valve: Aluminium Gk Al Si 10 Mg (DIN 1725)
Spec.: Set pressure: GA 90-500: 4 bar(e)
GR 110-200: 10 bar (e)
Duty: To ensure a minimum oil injection pressure
ZT-LVDB AIF
110 Aftercooler Acc. note ALFA LAVAL Note: GA 90-110W: 1614 9580 00
(water cooled) GA 132-160W: 1614 9584 00
GA132-180W VSD: 1614 9584 00
GA 200-315W*: 1614 9543 00
GA 315 VSD: 1614 9543 00
GA 315-500W**: 1621 1491 00 (2x)
Mat.: Stainless steel
SERCK Note: GR110-200W: 1621 9129 08
GA90-110W: 1621 2094 08
GA132-160W: 1621 2050 08
GA180W VSD:
GA200-315W Pack: 1614 8663 08
GA200-315W FF: 1614 8663 08 + 1621 2083 08
GA315-500W: 1621 2677 08 (2x)
Mat.: Tubestack : Cu-Ni 90/10
Outer casing : Cast aluminium
111 Water separator Acc. note EBÖ Note:
GA 90-110: 1613 9370 80
GA 132-315*: 1613 9463 80
GA132-180VSD: 1613 9463 80
GA 90-110 with ECD: 1613 9370 81
GA 132-315* with ECD: 1613 9463 81
GA132-180VSD with ECD: 1613 9463 81
GA 315 VSD: 1614 9139 80
GA 315-500**: 1614 9139 80 (2x)
GA 315 VSD with ECD: 1614 9139 81
GA 315-500** with ECD: 1614 9139 81 (2x)
GR 110-200: 1614 6728 00
GR 110-200 with ECD: 1614 9374 00
Mat.: BOWL Aluminium
HEAD Aluminium (Impregnated)
Spec.: Maximum working pressure: GA 90-500 16 bar(e)
GA132-180VSD, 16 bar(e)
GA315 VSD
GR 110-200 22 bar(e)
Duty: To separate moisture from the air
Rem.: Water separation by means of cyclone action
112 Oil cooler Acc. note AKG Note: GA 90: 1614 9358 00 (2x)
(air cooled) GA 110: 1614 9188 00 (2x)
GA 132: 1614 9365 00 (2x)
GA 160: 1614 9189 00 (2x)
GA132-180VSD: 1614 9189 00 (2x)
GA 200-315*: 1614 9588 00 (1x)
GA 200-315*: 1614 9589 00 (1x)
GA 315 VSD: 1614 9589 00 (2x)
GR 110: 1621 9048 00 (1x)
GR 110 : 1621 9047 00 (1x)
GR 132-160-200: 1621 9046 00 (1x)
GR 132-160-200 : 1621 9044 00 (1x)
Mat.: Aluminum
Duty: Cooling the oil which is injected in the compressor element
112 Oil cooler Acc. note ALFA LAVAL Note: GA 90-110W: 1614 9580 00
(water cooled) GA 132-160W: 1614 9584 00
GA132-180W VSD: 1614 9584 00
GA 200-315W*: 1614 9543 00
GA 315 VSD: 1614 9543 00
GA 315-500W**: 1621 1491 00 (2x)
SERCK GR 110-200W: 1621 8666 08 (2x)
GA90-110W: 1614 8661 08
GA132-160W: 1614 8662 08 (2x)
GA180W VSD:
GA200-315W: 1614 8664 08 + 1621 2035 08
GA315-500W: 1614 8664 08 (2x) + 1614 8665 08 (2x)
Mat.: Tubestack : Cu-Ni 90/10
Outer casing : Cast aluminium
Name: LEGEND FOR FLOW SHEET 9823 9034 00
ZT-LVDB AIF
115 Oil stop valve Acc. note Atlas Copco Note: GA 90-315*: 1614 9185 80
GA132-180VSD 1611 6302 91
GR 110-200 : 1614 6474 80
GA 315 VSD: 1611 6502 90
GA 315-500**: 1611 6502 90 (2x)
Mat.: Housing: Cast iron GG20 (DIN 1691)
Valve: Steel, DIN 1651 + Vulcanised HNBR (GA132-180VSD)
Compression spring: Steel wire 1.4, DIN 2076A
Piston: X12CrMo5 17 (DIN 17440)
Duty: To cut off oil injection
116 Control valve Acc. note Econosto Note: GA132-180W VSD, 230V - 50 Hz: 1089 0652 01
GA 315W VSD
115V - 60 Hz: 1089 0652 02 CSA/UL approved
230V - 60 Hz: 1089 0652 03
Duty: Oil cooler by-pass
ZT-LVDB AIF
Acc. Temperature 1089 0574 07 Jumo Note: GA 90-160: TT11, TT44, TT19, TT51
Note sensor GA132-180VSD: TT11, TT44, TT19, TT51
GA 315 VSD: TT11, TT44, TT19, TT51
GA 200-315*: TT11.1, TT11.2, TT44, TT19, TT51
GR 110-200: TT11.1, TT11.2, TT44, TT19, TT51
GA 315-500**: TT11.1, TT11.2, TT44.1, TT44.2, TT19, TT51
Spec.: Useable range: -40°C to 250°C
Thread connection: ISO 7/1 - R 3/8
Type: Pt 1000
Duty: TT11 (GA 90-160): To measure the element outlet temperature to prevent damage
(GA132-180VSD): from too high outlet temperature
(GA 315 VSD):
TT44: To measure air receiver air temperature to prevent damage from
too high air-oil mixture temperature
TT44.1: To measure air receiver 1 air temperature to prevent damage
from too high air-oil mixture temperature
TT44.2: To measure air receiver 2 air temperature to prevent damage
from too high air-oil mixture temperature
TT11.1 (GR 110-200): To measure the outlet temperature of LP element to prevent
damage from too high outlet temperature
TT11.2 (GR 110-200): To measure the outlet temperature of HP element to prevent
damage from too high outlet temperature
TT11.1 (GA 200-500): To measure the outlet temperature of element 1 to prevent
damage from too high outlet temperature
TT11.2 (GA 200-500): To measure the outlet temperature of element 2 to prevent
damage from too high outlet temperature
TT19: To measure the delivery air temperature
TT51: To measure the cooling water outlet temperature (water cooled)
PT 20 Pressure 1089 0575 28 Kavlico Note: only on GA90-500, GA132-180VSD, GA 315 VSD
transducer Mat.: Housing: Stainless steel 304.SS
Sealing: Buna-N
Type: P165-5300
Spec.: Operating temp.: -20°C to 100°C
Ambient temp.: -20°C to 70°C
Supply voltage: 5 V DC ± 0.25 V DC
Pressure range: -1 to 17 bar(e)
Duty: To measure the delivery air pressure
Acc. note Pressure 1089 0575 28 Kavlico Note: only on GA90-500, GA132-180VSD, GA 315 VSD
transducer Mat.: Housing: Stainless steel 304.SS
Sealing: Buna-N
Type: P165-5300
Spec.: Operating temp.: -20°C to 100°C
Ambient temp.: -20°C to 70°C
Supply voltage: 5 V DC ± 0.25 V DC
Pressure range: -1 to 17 bar(e)
Duty: PT 42 : To measure the oil injection pressure
PT 42.1 – PT 42.2 : To measure the oil injection pressure of element 1 - 2
Acc. note DP transducer 1089 0575 20 Kavlico Mat.: Housing: aluminium alloy, 6013-T8
Sealing: Buna-N
Type: P321-5013
Spec.: Operating temp.: -20°C to 100°C
Ambient temp.: -20°C to 70°C
Name: LEGEND FOR FLOW SHEET 9823 9034 00
ZT-LVDB AIF
PDT03 DP transducer 1089 0575 20 Kavlico Duty: To measure the pressure drop over the DD-filter
PDT02 DP transducer 1089 0575 33 Kavlico Mat.: Housing: Stainless steel 316L
Sealing: Buna-N
Type: P406-9710
Spec.: Operating temp.: -20°C to 100°C
Ambient temp.: -20°C to 70°C
Supply voltage: 5 V DC ± 0.25 V DC
Pressure range: -172 to 172 mbar(e)
Duty: To measure the pressure drop over the air inlet filter
123 Plug 1614 9146 00 Atlas Copco Mat.: Steel 5.8; yellow chromated
1614 9252 00 Atlas Copco Spec.: Max. working pressure: 400 bar
{oil cooler(s)}
Thread connection: M30 x 1.5 M26 x 1.5 for oil cooler(s)
Duty: To drain manually the air receiver and oil cooler(s)
--- Vibration Acc. note Trelleborgs Note: GA90-160/ 1020 5072 00 (3x) (2x compressor,1x motor)
GA132-180VSD:
Dampers Gummifabrik 1614 9542 00 (3x) (vessel)
GA 200-315*: 1614 6366 02 (2x) (compressor)
1619 5318 01 or 1619 5318 02(motor)
1614 9542 00 (3x) (vessel)
GA 315 VSD: 1619 5318 01 (3x) (2x compressor,1x motor)
1614 9542 00 (3x) (vessel)
GA 315-500**: 1614 6366 03 (3x) (2x compressor,1x motor)
1614 9542 00 (6x) (vessel)
GR 110-200: 1619 5318 02 (compressor – 2x)
1619 5318 01 (motor 1x)
1614 9542 00 (3x) (vessel)
Type: GA90-160/ Novibra RA800EMB (compressor + motor)
GA132-180VSD:
Novibra Type A 50/25 Nr 1255860 (vessel)
GA 200-315*: Novibra RA1200A (compressor)
Novibra RA800B or RA800A (motor)
Novibra Type A 50/25 Nr 1255860 (vessel)
GA 315 VSD: Novibra RA800B (compressor + motor)
Novibra Type A 50/25 Nr 1255860 (vessel)
GA 315-500**: Novibra RA2500EMB (compressor + motor)
Novibra Type A 50/25 Nr 1255860 (vessel)
GR 110-200: Novibra RA800A (compressor – 2x)
Novibra RA800B (motor – 1x)
Novibra Type A 50/25 Nr 1255860 (vessel)
Spec.: Maximum load: GA90-160/GA180 VSD: 8000 N (compressor + motor)
1877 N (vessel)
GA 200-315*: 9000 N (compressor)
13000 N or 7500 N (motor)
2442 N (vessel)
GA 315 VSD: 13000 N (motor)
2442 N (vessel)
GA 315-500**: 34000 N (compressor + motor)
2 x 2442 N (vessel)
GR 110-200: 7500 N (compressor)
13000 N (motor)
Duty: To isolate vibrations generated by the compressor from the frame
124 Fan Acc. note Multifan Note: GA 90-110: 50 Hz: 1614 9285 00
(air cooled) 60 Hz: 1614 9287 00
GA 132-160: 50 Hz: 1614 9287 00 (2x)
60 Hz: 1614 9424 00 (2x)
GA 200-315*: 50 Hz: 1614 9285 00 (2x)
Name: LEGEND FOR FLOW SHEET 9823 9034 00
ZT-LVDB AIF
Duty: To generate cooling air for the air cooler and oil cooler
124 Fan
(water cooled) Acc. note Multifan Note GA 90-315W*/ GR 110-200W/ 50 Hz 1614 9622 00
GA132-180W VSD
GA 90-315W*/ GR 110-200W/ 60 Hz 1614 9623 00
GA132-180W VSD
Spec. Number of blades: 6, equally divided
Mat. Polyamide 6 reinforced with 30% glass fibre
Duty To generate cooling air for the drive motor and air inlet
125 Coupling element Acc. note Rexnord Note: GA 90-160: 1614 8738 00
GA 200-315*: 1614 8739 00
GR 110-132-160: 1614 8738 00
GR 200: 1614 8739 00
Mat.: EPDM
Spec.: Temperature range: -55°C up to 100°C
Resistant to any environmental conditions except some hydrocarbons and oils
Type: GA 90-160: Sure-flex JX13
GA 200-315*: Sure-flex JX14
GR 110-132-160 : Sure-flex JX13
GR 200: Sure-flex JX14
Duty: To provide a flexible coupling between drive motor and gearbox drive shaft
125 Coupling Acc. note Rexnord Note: GA132-180VSD: 1614 9820 00 Texoflex DL (motor side)
1614 9836 00 Texoflex DL (compressor side)
GA 315 VSD: 1614 9133 00 Texoflex DN (motor side)
1614 9134 00 Texoflex DN (compressor side)
GA 315-450**: 1621 1442 00 Texoflex DP (motor side)
1621 1444 00
1621 1445 00
1621 1446 00
1621 1443 00 Texoflex DP (compressor side)
GA 500: 1621 2204 00 Texoflex DQ (motor side)
1621 2205 00
1621 2247 00
1621 2203 00 Texoflex DQ (compressor side)
Duty: To provide a flexible coupling between drive motor and element drive shaft
128 Fan motor Acc. note ABB Note: GA 90-110: 230&400V/50Hz: 1080 4034 02
(air cooled) 500V/50Hz: 1080 4034 04
220&380V/60Hz: 1080 4034 07
220-230V/60Hz: 1080 4034 07 (CSA)
440-460V/60Hz: 1080 4034 02 (CSA)
575V/60Hz: 1080 4034 04 (CSA)
GA 132-160: 230&400V/50Hz: 1080 4034 02 (2x)
500V/50Hz: 1080 4034 04 (2x)
380V/60Hz: 1080 4034 07 (2x)
220-230V/60Hz:
440-460V/60Hz: 1080 4034 02 (CSA) (2x)
575V/60Hz: 1080 4034 04 (CSA) (2x)
GA 200-315*: 400V/50Hz: 1080 4034 12 (2x)
500V/50Hz: 1080 4034 14 (2x)
440V/50Hz:
380V/60Hz: 1080 4034 17 (2x)
220-230V/60Hz:
440-460V/60Hz: 1080 4034 12 (CSA) (2x)
575V/60Hz: 1080 4034 14 (CSA) (2x)
GR 110-132-160 230&400V/50Hz: 1080 4034 42 (GR 110 – 1x )
440-460V/60Hz ( GR 132-160 – 2x )
500V/50Hz 1080 4034 44 (GR 110 – 1x )
( GR 132-160 – 2x )
380V/60Hz: 1080 4034 47 (GR 110 – 1x ) ( GR 160 – 2x )
Name: LEGEND FOR FLOW SHEET 9823 9034 00
ZT-LVDB AIF
127 Drive motor Acc. note ABB Note: 50Hz: 3x230V: 3x400V: 3x500V:
GA 90: 1080 2855 11 1080 2855 12 1080 2855 14
GA 110 – GR 110: 1080 4022 01 1080 4022 02 1080 4022 04
GA 132 – GR 132: 1080 4023 01 1080 4023 02 1080 4023 04
GA 160 – GR 160: 1080 2857 11 1080 2857 12 1080 2857 14
GA 200 - GR 200: N/A 1080 2859 52 1080 2859 54
GA 250: N/A 1080 4046 02 1080 4046 04
GA 315: N/A 1080 4195 01 1080 4195 03
GA 355: N/A 1080 4196 01 1080 4196 03
GA 400: N/A 1080 4197 01 1080 4197 03
GA 450: N/A 1080 4198 01 1080 4198 03
ABB 60Hz: 3x220-230V: 3x380V: 3x440-460V:
IEC
GA 90: 1080 2855 17 1080 2855 18 1080 2855 19
GA 110 – GR 110: 1080 4023 17 1080 4023 18 1080 4023 19
GA 160 – GR 160: N/A 1080 2857 18 1080 2857 19
GA 200 – GR 200: N/A 1080 2859 58 1080 2859 59
GA 250: N/A 1080 4046 08 1080 4046 09
GA 315: N/A 1080 4046 18 1080 4046 19
GA 355: N/A 1080 4196 21 1080 4196 23
GA 400: N/A 1080 4198 21 1080 4198 23
GA 450: N/A N/A 1080 4198 27
ABB 60 Hz 3x 440-460V 3x 575V
CSA
GA 90: N/A 1080 4005 19 1080 4005 20
GA 110: N/A 1080 4006 29 1080 4006 30
GA 160 : N/A 1080 2639 09 1080 2639 10
GA 200: N/A 1080 4050 09 1080 4050 10
GA 250: N/A 1080 4051 09 1080 4051 10
GA 315: N/A 1080 4052 09 1080 4052 10
WEG 60 Hz 3x 440-460V 3x 575V
CSA
GA 90: N/A 1080 4146 09 1080 4146 10
GA 110: N/A 1080 4147 09 1080 4147 10
GA 160 : N/A 1080 4148 09 1080 4148 10
GA 200: N/A 1080 4149 09 1080 4149 10
GA 250: N/A 1080 4150 09 1080 4150 10
GA 315: N/A 1080 4151 09 1080 4151 10
GA 355: N/A 1080 4199 01 1080 4199 03
GA 400: N/A 1080 4199 11 1080 4199 13
GA 450: N/A 1080 4199 21 1080 4199 23
Rem.: Part numbers are for motors without options
ZT-LVDB AIF
134 Valve Acc. note ECONOSTO Note GA 90-110: 1614 9211 00 (3x)
GA 132-160 1614 9212 00 (3x)
GA132-180VSD: 1614 9212 00 (3x)
GA 200-315*: 1614 9709 00 (3x)
GA 315 VSD: 1614 9709 00 (1x)
GR 110-200: 1621 9069 00 (3x)
Duty: To by-pass dryer
301-410 Integrated dryer Acc. note Atlas Copco Note GA 90-110: 1617 2160 80 - 88
GA 132-160: 1617 2162 80 - 88
GA132-180VSD: 1617 2162 80 - 88
GA 200-315*: 1617 2981 80 - 88
GA 315 VSD: 1617 2967 81 - 84
GR 110-200 (13 bar): 1617 2162 80 - 88
GR 110-200 (20 bar): 1617 2830 80 - 88
GA 90-110W: 1617 2161 80 - 88
GA 132-160W: 1617 2163 80 - 88
GA132-180W VSD: 1617 2163 80 - 88
GA 200-315W*: 1617 2166 80 - 88
GA 315W VSD: 1617 2967 85 - 88
GR110-200W (13 bar): 1617 2163 80 - 88
GR110-200W (20 bar): 1617 2831 80 - 88
Duty: To remove moisture from the compressed air
General remark:
* = except GA 315 – 50 Hz
** = except GA 315 – 60 Hz