This document contains a list of fault codes and descriptions for various laser printer faults. The faults include issues detecting incorrect laser voltage or temperature, unsupported print head settings, the servo or galvo type not being set, laser enable status not matching the laser ready feedback, incorrect laser state for the current printing state, incorrect servo or galvo mute status for printing, the manual interlock circuit being opened, the beam stop being activated, an emission indicator fault, incorrectly set interlock mode jumpers, inconsistent channels in the 2-channel interlock circuit, the lens or laser type not being set, and a required reboot after changing the laser type. An incompatible technology board is also listed as a potential fault.
This document contains a list of fault codes and descriptions for various laser printer faults. The faults include issues detecting incorrect laser voltage or temperature, unsupported print head settings, the servo or galvo type not being set, laser enable status not matching the laser ready feedback, incorrect laser state for the current printing state, incorrect servo or galvo mute status for printing, the manual interlock circuit being opened, the beam stop being activated, an emission indicator fault, incorrectly set interlock mode jumpers, inconsistent channels in the 2-channel interlock circuit, the lens or laser type not being set, and a required reboot after changing the laser type. An incompatible technology board is also listed as a potential fault.
This document contains a list of fault codes and descriptions for various laser printer faults. The faults include issues detecting incorrect laser voltage or temperature, unsupported print head settings, the servo or galvo type not being set, laser enable status not matching the laser ready feedback, incorrect laser state for the current printing state, incorrect servo or galvo mute status for printing, the manual interlock circuit being opened, the beam stop being activated, an emission indicator fault, incorrectly set interlock mode jumpers, inconsistent channels in the 2-channel interlock circuit, the lens or laser type not being set, and a required reboot after changing the laser type. An incompatible technology board is also listed as a potential fault.
73105 F Incorrectlaser voltage or temperature fault
detected. 73106 F Unsupported print head setting value 73107 F detected. Servo/galvo typeis not set. 73108 F Laser enable status and the laser ready feedback do not match. 75053 F Laser state Incorrect (tickle/ enable) for current printing state. 75054 F The status of the Servo/ Galva mute (muted/ unmuted} is incorrect for current printing state. 75055 F The manualinterlock circuit has been 75056 F opened. The beam stop has been activated. 75057 F Emission Indicator Fault. 75058 F The Interlock mode configurationjumpers areIncorrectly set. 75061 F The channelsin the 2-channelinterlock circuit are inconsistent. 75062 F The lens typeis not set. 75063 F The laser type Is not set. 75064 F A reboot Is required after changinglaser type. 75069 F Extractor filter is blocked. 75070 F Incompatible technology board detected I I