Professional Documents
Culture Documents
sw17 Cap Tri Spinner
sw17 Cap Tri Spinner
Chapter 6
Cap
A. Revolve.
Step 1. Click File Menu > New, click Part Metric and OK.
Fig. 2 Fig. 3
Step 7. Click Smart Dimension (S) on the
Sketch toolbar.
Step 11. Sketch arc between top left corner and centerline, Fig. 5.
7/24/17
SOLIDWORKS 17 C ap TRI-SPINNER P age 6-1
© Cudacountry.net Tech Ed
http://www.cudacountry.net email:cudacountry@hotmail.com
Step 12. Click Smart Dimension (S) on the Sketch toolbar.
B. Save as "CAP".
Step 1. Click File Menu > Save As.
Fig. 7
Step 2. Key-in CAP for the filename and press ENTER.
Step 1. Click the side face and click Sketch on the context toolbar, Fig. 9.
Fig. 9 Fig. 10
D. Fillet Face.
Fig. 11 Fig. 12
Step 1. Click Fillet on the Features toolbar.
Fig. 15
Fig. 20
Fig. 19
Fig. 18
H. Mate: Cap.
Step 1. Click Mate on the Assembly
toolbar. Fig. 21
, Fig. 24.
Click Add/Finish Mate
to add a Concentric mate. Fig. 22
Fig. 24
Fig. 23
Step 5. Rotate view to side face of Bearing and click side face of Bearing race, Fig. 26.
Fig. 31
Fig. 30
Fig. 32