nore
‘When using the special tool, follaw the manutac-
turer's operating instructions.
Locate the rive chain cunter on the staked part of
‘the drive chain and cut the staked pins.
Too
[Drive chain tool set OvHMH— MR 10103 or
OvHMH—MR 10104
(USA. oniy)
Remove the drive chain,
Remove the excase drive chain links fram the naw
‘drive chain with tha drive chain extia,
NOTE
‘+ One (1) link is indicated as tha figura on tha right,
‘Include the master link whan you eount the driv
chain links.
STANDARD LINKS: 120L
REPLACEMENT CHAIN: RK: 525 SN15
DID: 5258
Install the naw drive chain ever tha awingaern.
eAUTION
‘Never rouse the ofdd master fink, master link plate
and Grringe.
Install the new O-rings onto the naw master link,
and insert the mastor link from the Insida of the
drive chain taking care to prevent squeezing
Install the O-rings and the fink plate writh the drive
hain eutter,
‘Toot:
Drive chain too! set O7HIIH—NIR 10103 or
O7HWIH—MRYaTOA
(USA. only)
NOTE:
* install the link plate with the identification mark
facing the outside.
* Take care to prevent squeezing of the O-rings,
Dp not remove initially applied grease from the
link to lubricate.
Flomove the speciel tool and check the master
{ink pin length projected from the plate
STANDARD LENGTH: 1.
—1.4 mm (0.05—0.06 in)
oe
MAINTENANCE
MASTER LINK
Ta
\
DRIVE CHAIN TOOL SET
¥ STANDARD LENGTH
MASTER LINK
DRIVE CHAINTOOL SET |