Professional Documents
Culture Documents
Pre-Analysis Checks: Etabs Modelling Checklist Remarks
Pre-Analysis Checks: Etabs Modelling Checklist Remarks
NO :
BUILDING NAME : DATE :
Check
Remarks
CHECK
PRE-ANALYSIS CHECKS
1 Matching between DWGs and ETABS model (geometry & levels )
2 Material properties as per general notes.
3 Concrete sections as per DWGs.
4 Modifiers factores for Concrete elements.
5 Diaphrams for areas are assigned
6 Auto/Manuel Mesh for shell elements.
7 All static loads have been implemented.
Manuel Torsion loads due to Leg beams or corbels have been
8
implemented for DL , SDL, WALLS & LL.
9 Live load reduction factor to be canceled if no. floors ≤5
10 Define response spectrum function
11 Mass source for seismic loads.
12 Check modal case (RITZ or Eigen)
13 Confirm seismic loading inputs are correct
14 Confirm wind loading inputs are correct
15 P-Delta effects activated (iterative).
M12 to be taken into consideration ( deisgn with program or make
16 M12 modefier =0.01 to redistrbiute twisting moment)
POST-ANALYSIS CHECKS
30 Stability of the model (run log)
31 Deformed shape for differne load cases is resonable
Your first mode period should be roughly of 0.08 to 0.15
32 multiplied by the number of storeys of your building.
Checker
Remarks
CHECK
11 Long term deflection for beams and slabs are within limits.
DWGs CHECKLIST
CHECK
Remarks
CHECK
DWGs CHECKLIST
CHECK
Remarks
CHECK