Professional Documents
Culture Documents
AK-TDS-213 ARAKRIL VVA 150 (En)
AK-TDS-213 ARAKRIL VVA 150 (En)
Arakril VVA 150 is a plasticizer, APEO and Ammonia free, formaldehyde free nonionic
aqueous dispersion based Vinyl acetate and VeoVa (vinyl ester of versatic acid).
Specification
Additional Data
These data are used solely to describe the product. They are not subject to constant monitoring or part of the
specification.
Exterior Paints
Semigloss and Tixotropic Paints
Plasters and Primers
Texture Paints
High PVC Paints
Application
Arakril VVA 150 is specially developed for interior and exterior, matt and semi gloss as
well as tixotropic paints. The semigloss paints made with Arakril VVA 150 have a good
gloss level and rheological behavior.
Due to its good binding power, it gives good scrub resistance in high PVC paints and has
good water resistance.
Dried film of ARAKRIL VVA 150 has a good water, alkali, and UV resistance.
This dispersion is also suitable for formulations of the medium PVC range, for interior and
exterior, flat as well as textured coatings.
Page 1 of 2
Shelf-life and Storage
The dispersion contains some initial preservatives to prevent attact by micro organisms.
In order that the product is also sufficiently protected against microbial contamination
during further storage in opened drums or storage tanks a suitable preservative should
be added despite our preliminary preservation measures. Checks should be carried out to
determine their compatibilitiy and efficacy. The tanks and pipework should be kept
adequately clean.
Arakril VVA 150 should not be stored for longer than 12 months before processing as far
as possible, storage should be at a uniform temperature in the region of 5-35ºC. The
product should, in principle, be kept away from frost and direct exposure to sunshine.
Furthermore it must be ensured that already opened drums or containers are always
tightly closed.
Due to the film forming ability of the product, it may occur skins. Filtration through a
coarse filter before use of the product is recommended.
The technical data ascertained by our quality control laboratory at the time of product
release may vary according to storage time and storage conditions and may deviate from
the stated limits.
Page 2 of 2