This document provides troubleshooting information for a failure code related to an open error in the PCV1 circuit of a supply pump. It lists the possible causes as a defective supply pump, disconnection in the wiring harness, or a ground fault in the wiring harness. For each possible cause, it gives the standard value measurements that should be present in the circuit when operating normally to aid in troubleshooting. A circuit diagram related to the supply pump PCV1 is also provided.
This document provides troubleshooting information for a failure code related to an open error in the PCV1 circuit of a supply pump. It lists the possible causes as a defective supply pump, disconnection in the wiring harness, or a ground fault in the wiring harness. For each possible cause, it gives the standard value measurements that should be present in the circuit when operating normally to aid in troubleshooting. A circuit diagram related to the supply pump PCV1 is also provided.
This document provides troubleshooting information for a failure code related to an open error in the PCV1 circuit of a supply pump. It lists the possible causes as a defective supply pump, disconnection in the wiring harness, or a ground fault in the wiring harness. For each possible cause, it gives the standard value measurements that should be present in the circuit when operating normally to aid in troubleshooting. A circuit diagram related to the supply pump PCV1 is also provided.
Action code Failure code IMV/PCV1 Open Error Trouble E11 CA272 (Engine controller system) Contents of Open error was detected in PCV1 circuit of supply pump. trouble Action of None in particular. controller Problem that appears on machine Related information
Cause Standard value in normal state/Remarks on troubleshooting
aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON. Defective supply pump PCV1 (male) Resistance 1 PCV1 (Internal disconnection) Between (1) (2) 2.3 5.3 z Between (1), (2) Min. 1 Mz chassis ground aPrepare with starting switch OFF, then carry out troubleshooting with- Disconnection in wiring out turning starting switch ON. harness Wiring harness between ENG (female) (4) Resis- 2 (Disconnection in wiring or Max. 1 z PCV1 (female) (1) tance defective contact in con- nector) Wiring harness between ENG (female) (5) Resis- Possible causes Max. 1 z PCV1 (female) (2) tance and standard value in normal aPrepare with starting switch OFF, then carry out troubleshooting with- state out turning starting switch ON. Ground fault in wiring har- Between wiring harness of ENG (female) (4) Resis- ness PCV1 (female) (1) and chassis ground and Max. 1 Mz 3 tance (Short circuit with GND cir- chassis ground cuit) Between wiring harness of ENG (female) (5) Resis- PCV1 (female) (2) and chassis ground and Max. 1 Mz tance chassis ground aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON. ENG (female) Resistance 4 Defective engine controller Between (4) (5) 2.3 5.3 z Between (4), (5) Min. 1 Mz chassis ground