Professional Documents
Culture Documents
Vinod Reddy CV
Vinod Reddy CV
VINOD REDDY
91-7795546803.
Vinodreddymr1994@gmail.com
Experience of 3.8 Years in CAE Hypermesh, LS-Dyna, Abaqus, MS-Office
Objective: Looking forward to work at a challenging position which offers ample opportunity to
learn further, develop one self and meet organizational goals where my knowledge can be
shared.
Experience Summary:
Total CAE Experience of 3.8 Years in service industries.
Working as CAE Engineer at Marutee Design and Engineering PVT ltd, from Jul
2017 to till date.
Experience in Deck Preparation with Boundary Conditions Load Collectors,
Constraints, Contacts, and Output cards, Etc. Hypermesh, LS Dyna and Abaqus.
Experience in preparing of Sub-assemblies and Full Assemblies Which Includes
Connections1-D, joints, welds, Rigid Connections.
Expertise in FEA Modeling in Hypermesh, with connections and component level
analysis.
Good exposure to Automotive Crash regulations like NCAP FMVSS, ECE.
Well versed with linear static, quasi static, transient dynamic and Abaqus Implicit
simulation.
Handled diverse modeling projects in automotive domain for NVH, Durability and Crash
Simulations.
Experience in building the FE models and deck preparation for the Optistruct, Abaqus,
Nastran, LS- Dyna, profiles to simulate different types of analysis.
Associated with different clients like Mahindra, Ashok Leyland, and John-Deere.
EDUCATION QUALIFICATION:
SOFTWARE SKILLS:
Pre-processor-Hypermesh, ANSA.
Solver-LS-DYNA, Abaqus, Optistruct.
Post-processors-Hyper View, LS-PREPOST, Abaqus viewer, MS Office.
MAJOR PROJECTS DETAILS:
Project Title: Dynamic Explicit Frontal Crash Analysis of Full Vehicle as per FMVSS 208
Standards.
Objective: Perform Crash Simulation of full vehicle with the speed of 56KMPH Assignment of
properties, materials, explicit cards, contacts etc. are defined. Boundary conditions are defined
according to the FMVSS Standards. Analysis is run and the plots are monitored to ensure once the
analysis is done, energy curves and Plastic strain, & Stress are plotted. Report is generated and
sent to Requester for documentation and development.
CURRICULAM VITAE
Project Title: Impact Analysis of S-201 RH and Center Air Vent According to ECE-R21
Software used: HYPERMESH, LS-Dyna, Hyper-view MS-Office
Objective: Perform impact Analysis of Air Vent with ECE-R21 Standards. Assignment of properties,
materials, explicit cards, contacts etc. are defined, Boundary conditions are defined according to the
ECE-R21 Standards. Analysis is run and the plots are monitored to ensure, once the analysis is done,
Observed 3ms clip Acceleration should be below 72g. Energy curves and Plastic strain, & Stress are
checked. Report is generated according to requirements and sent to Requester for documentation
and development.
Project Title: Seat, seat belt and their Anchorages M1 M2 M3 as per vehicle weights as per
the standards of FMVSS207/210.
Software used: HYPERMESH, LS-Dyna, LS-prepost MS-Office.
Objective: Understanding seat assembly weld, bolt, pin, connections. The function of seat
components. Pre- processing of cad model surface clean-up,2d-meshing,1d-connections, assigning
materials, properties, final quality check, Deck preparation assign contacts, control cards. Final check
before submitting to solver check, debug submit to solver check for the results as per standards and
make a report and submit to requester.
Project Title: Side pole impact analysis on LH door according to FMVSS 214.
MESHING PROJECTS:
Project Title: FE Modelling and Assembly of closures for Durability test for Abaqus profile
Project Title: FE Modelling and Assembly of IP panel for head impact analysis for LS-Dyna.
Project Title: FE modelling of A, B, and C –Pillar for impact test for LS-Dyna profile.
Description: The scope of the project work is geometry cleanup, surface editing and extract the mid
surface. Meshing of the component with shell elements as per the customer guidelines and quality is
maintained. Assign the material properties and intersection and penetration removing. All basic
checks are performed.
CURRICULAM VITAE
PERSONAL PROFILE:
DECLARATION:
I hereby declare that a fore said information is true to the best of my knowledge.
-Vinod Reddy
+91-
7795546803.