Professional Documents
Culture Documents
6 - Fabrication of CAM Mechanism For Press
6 - Fabrication of CAM Mechanism For Press
PRESS
SYNOPSIS
manual operated. Cam and follower, bearing, male and female die are used
in our project. The cam and follower is used to convert the rotary motion
into the linear motion, the movement operate a mechanical press. The
FOR PRESS
WORKING PRINCIPLE
The female die is placed on the bottom of the frame. The whole setup
is mounted on the base frame. The handle operates to cam rotated. A cam
and press tool, cam operating to follower is linear motion to press work
piece. Hence the pressing tool which is mounted at the bottom of the
MERITS
Simple construction
Easy maintenance
Low cost
DEMERIT