Professional Documents
Culture Documents
17.5/24kV Deadbreak 250A Elbow Connector
17.5/24kV Deadbreak 250A Elbow Connector
www.chardongroup.com
DETAILED COMPOSITION OF THE CHARDON
APPLICATION DEADBREAK STRAIGHT CONNECTOR
The Chardon Deadbreak Elbow Connector products that meet EN-50180 & EN-50181.
is a fully shielded and insulated termination
Chardon Deadbreak Elbow Connectors are
for connecting underground cable to
molded using high quality peroxide –cured
transformers, switch gear and other apparatus
insulating and semi-conducting EPDM rubber.
equipped with deadbreak bushings, junctions,
Al l i n s u l at i n g r u b b e r i s co m p o u n d e d i n
or other deadbreak connectors.
house, using Chardon - developed proprietary
SEMICONDUCTING SHIELD CAPACITIVE TEST POINT
The Chardon Deadbreak Elbow meets all the formulations. Chardon Deadbreak Elbow
Precision molded peroxide cured Capacitive test point on molded Elbow
requirements of HD629.1 , EN-50180 , EN- Connecters a copper probe. Combined with semiconduc ting shield provides with snap-on cap provides a shielded,
50181 & IEC 60502, and is fully interchangeable the bi-metal compression lug, this ensures a ground shield continuity and meets the hotstick operable means to determine
w i t h co m p e t i to r ' s p ro d u c t s a n d m a t i n g reliable operating connection. requirements of IEEE Standard 592. circuit condition.
AC 5 Minute Withstand 57 kV Overload Current (8 hour maximum) 300 A COMPRESSION CONNECTOR PROBE
Compression connector is sized to Tin plated copper probe ensures
Minimum Corona Voltage Level 22 kV < 3pC
ensure a cool running connection with reliable electrical connection.
maximum current transfer.
BIL and Full Wave Crest (Impulse) 125 kV
• 24CE250-041118-REV02
w w w.chardongroup.com
DETAILED COMPOSITION OF THE CHARDON
DEADBREAK STRAIGHT CONNECTOR ORDERING INFORMATION
17.5/24kV Deadbreak Elbow
Each kit Contains:
Elbow body Bail Assembly
Bi-Metal Compression Lug Silicone Grease
Copper Probe Installation Instruction Sheet
Probe Installation Tool
To order a Chardon 24kV Deadbreak Elbow Kit, follow the steps below:
Example :
To order a standard Chardon 17.5/24kV Deadbreak Elbow with a cable insulation diameter of 0.990”, a 3/0 bi-metal compression connector, and a
capacitive test point, order the part number 24-CE250TC08.
w w w.chardongroup.com
No.37 Min-Chie Road, Tung Lo
Industrial Park, Miao Li, Taiwan 366
Te l : +886-37-984385
Fax : +886-37-984770
www.chardongroup.com • info@chardongroup.com