Professional Documents
Culture Documents
ETEM - E85 - Technical Catalogue
ETEM - E85 - Technical Catalogue
Е85
CURTAIN WALL SYSTEM
TABLE OF CONTENTS
I.
CURTAIN WALL SYSTEM E85
II.
CE MARKING page 361
5
ETEM HISTORY
ETEM is a leading aluminium extrusion company. It was founded in 1971 as a part of the largest
metal manufacturing holding on the Balkans. With over 40 years of experience ETEM is a fully
integrated designer and producer of architectural systems and aluminium profiles for industrial
applications.
Our mission is to listen and promptly respond to our customers’ requests and design and
manufacture aluminium products and systems, taking into consideration technical and aesthetic
requirements.
ETEM focuses on sustainable development and has proven its concern about the protection of
the natural environment by making considerable investments in anti-pollution measures and by
optimizing production processes following the applicable standards of the European Union.
SERVICES
WE PROVIDE
▻ design of conventional and bespoke ▻ trainings, technical support and audits on
architectural system solutions site
▻ innovative engineering in the field of curtain ▻ high quality engineering which guarantees
walls, ventilated facades, doors, windows offering the best solution according to the
specific features of every single project
▻ professional consultation and adequate
technical advices ensured by our engineering ▻ managing the process of certification in
team with wide experience in the field of profile accordance with the applicable European
extrusion as well as architectural systems’ standards in Notified Bodies
engineering
▻ production of non-standard length profiles
▻ reliable customer care constant support and non-standard processing; high quality
powder coating
6
GENERAL
INFORMATION
CONCEPT / ADVANTAGES / CERTIFICATES
E85 CURTAIN WALL
CONCEPT
E85 IS A HIGHLY FLEXIBLE STICK FAÇADE SYSTEM FOR CURTAIN WALLS
INCLUDING CONSTRUCTIONS FOR ROOFS, CUPOLS, ATRIUMS, PYRAMIDS
AND CONSERVATORIES
5 0 mm system width
E asy production and rapid installation onsite
H
ighest structural stability achieved with lowest weight of profiles
W
ide variety of profiles
S
olutions for structural and cover assembly options
S
tructural vents
C ompatible with all ETEM window systems
C ustom designed solution for conservatories
E asy to install sun protection panels in front of the façade (smart
façade)
Q
UALICOAT certified powder coating
A
vailable in burglar-resistance version
11
CONCEPT
E85 is a 50 mm stick façade system.
There are several variations of the system:
12
4. P
ROJECTED / PARALLEL OPENING WINDOW
INCORPORATED IN E85
13
curtain wall system E85
E85 is a multifunctional system which can be com- The high structural stability of the system is
bined with any kind of glazing and shape as well as achieved with lowest weight of the profiles.
with other materials.
E85 has optimum thermal performance even in
E85 enables the execution of complex constructions regions with severe weather conditions.
as roofs, cupolas, atriums, pyramids, conservatories.
E85 has effective and proved airtightness and and specially constructed supplementary profiles for
watertightness, due to large internal drains on sealing the perimeter of the façade.
three levels, without discontinuity at the junction of
mullions or transoms, carefully designed accessories All characteristics of the system are tested in ift
Rosenheim.
E 85 technical catalogue
01.2011 1.2
14
curtain wall system E85
Water
WATER drainage
DRAINAGE principles
PRINCIPLES
3rd level
transom
mullion
water
drainage
specially designed
gasket, which
facilitates water
drainage
B 2nd level
transom
The special geometry of E85 profiles facilitates Gasket seal (A) and foam seal (B) have firming func-
water drainage tion and also make water drainage easier.
Drainage fitting (C) enables water drainage when
The good drainage of this system is achieved by two connecting two mullions.
levels of drainage and by big channels on mullions
and transoms. New flanges (D) and (E) permit thermal expansion of
the profiles.
E 85 technical catalogue
01.2011 1.5
15
curtain wall system E85
There is an extended range of options for joining mullions and transoms according to the applied loads
Additional joints can be used case of severe loads
E 85 technical catalogue
01.2011 1.6
16
TEST CERTIFICATES SYSTEM E85
Test sample Characteristic Result Standarts
Air permeability AE EN 12152
EN 12153
EN 12154
Water tightness static; dynamic R7; 200 Pa/600 Pa EN 12155
EN 13050
Е85 Structural glazing
Resistance to wind load design load; ±1,6 kN/m2; ±2,4 kN/m2 EN 13116
safety load EN 12179
Impact resistance I5 / E 5 EN 14019
Hose test pass AAMA 501.2
Air permeability AE EN 12152
EN 12153
EN 12154
Water tightness static; dynamic RЕ 900; 200 Pa/600 Pa EN 12155
E85 with cover caps ENV 13050
Resistance to wind load design load; ±1,6 kN/m2; EN 13116
safety load ±2,4 kN/m2 EN 12179
Impact resistance I4 / E4 EN 14019
Dead load ad glass loads from 0,50 kN to 6,00 kN EN 13830
EN 1999-1-1
Е85 Curtain wall
Resistance to horizontal loads 0,50 kN/m2; 1,00kN/m2; 2,00kN/m2 EN 13830
EN 1999-1-1
Air permeability class 3 EN 12207
EN 1026
Water tightness 6A EN 12208
E85 with cover caps EN 1027
Resistance to wind load C5 EN 12210
EN 12211
Impact resistance I2/ E5 l EN 13049
E85 2 Sided structural glazing Thermal transmittance Uf = 2,1-2,6 W/m2.K EN ISO 10077-2
EN 12412-2
E85 4 Sided structural glazing Thermal transmittance Uf = 2,7-3,2 W/m2.K EN ISO 10077-2
EN 12412-2
E85 with pressure plate Thermal transmittance Uf = 1,6-2,9 W/m2.K EN ISO 10077-2
EN 12412-2
E85 with additional thermal insulation spacer Thermal transmittance Uf = 1,6-2,3 W/m2.K EN ISO 10077-2
EN 12412-2
E85 with glazing 6-16-4+4 mm Sound Insulation Rw = 39 dB EN ISO 717-1
EN ISO 10140-2
E85 with glazing 4-20-6+6 mm Sound Insulation Rw = 41 dB EN ISO 717-1
EN ISO 10140-2
E85 with cover cap glazing 6-15-5 mm Sound Insulation Rw = 35 dB EN ISO 717-1
EN ISO 10140-2
E85 with cover cap glazing 13VSG-20-9 VSG Sound Insulation Rw = 44 dB EN ISO 717-1
EN ISO 10140-2
E85 with cover cap glazing 13-24-9 mm Sound Insulation Rw = 47 dB EN ISO 717-1
EN ISO 10140-2
E85 with glazing 4+4-24-6+6 mm Sound Insulation Rw = 47 dB EN ISO 717-1
EN ISO 10140-2
E85 Anti-burglar Façade with glass and panel Bullet resistance FB4 NS EN 1522
EN 1523
E85 Anti-burglar Façade with glass and panel Bullet resistance FB3 NS EN 1522
EN 1523
E85 Anti-burglar Façade with glass and panel Bullet resistance FB2 NS EN 1522
EN 1523
EN 1627
E85 Anti-burglar Burglar resistance WK 3 EN 1628
EN 1629
EN 1630
EN 1627
E85 Anti-burglar Burglar resistance WK 4 EN 1628
EN 1629
EN 1630
E85 Ageing behaviour of i.g. Units pass EN 1279-2
E85 Moisture penetration index-short term Ireq=5.2% EN 1279-6
climate test Units
E85 Adhesion tests pass ETAG 002-1
GLOS ETEM E85RW Heat exhaust ventilator pass EN 12101-2
17
Characteristics and performances of curtain walling according to EN 13830
№ Designation Units Class or Declared value
1 Reaction to fire of components npd F E D C B A2 A1
2 Fire resistance
Integrity (E) min npd E15 E30 E60 E90 E15
i→o, o→i, i↔o
Integrity and insulation (EI)
min npd EI15 EI30 EI60 EI90 EI120
i→o, o→i, i↔o
Integrity and radiation (EW)
min npd EW20 EW30 EW60
i→o, o→i, i↔o
3 Fire propagation min npd Declared value
4 Watertightness R4 R5 R6 R7 RE
Pa npd
Test pressure (150) (300) (450) (600) (›600)
5 Resistance to its own dead loads kN/m2 npd Declared value
6 Wind load resistance kN/m2 npd Declared value
7 Resistance to snow load (only for
kN/m2 npd Declared value
elements subjected to snow load)
8 Impact resistance/safe breakage
I0 I1 I2 I3 I4 I5
Internal mm npd
(n.a.) (200) (300) (450) (700) (950)
Drop height
External E0 E1 E2 E3 E4 E5
mm npd
Drop height (n.a.) (200) (300) (450) (700) (950)
Resistance to live horizontal loads at
9 kN/m npd Declared value
sill level
10 Seismic resistance
- npd Declared value
Serviceability
Safety in use - npd Declared value
11 Thermal shock resistance - npd Declared type of glass
12 Direct airborne sound insulation
dB npd Declared value
Rw(C;Ctr)
13 Flanking sound transmittance
dB npd Declared value
Dn,f,w
14 Thermal transmittance
W/(m2.K) npd Declared value
Ucw
15 Air permeability A1 A2 A3 A4 AE
Pa npd
Test pressure (150) (300) (450) (600) (›600)
16 Water vapour permeability - npd Declared type of vapour barrier
17 Radiation properties
Total solar energy transmittance (Solar - npd Declared value
factor)
Light transmittance - npd Declared value
Declared value
18 Equipotential bonding - npd
19 Durability
- npd
Durability of watertightness Declared value
18
ADVANTAGES AND COMBINATION
COMBINATIONS
6/16/6 Low Emission 6/16/6 Low Emission 6sun guard/16/6 6sun guard/12/6/12/6
Argon Low Emission Low Emission
28 28 28 42
6 16 6 6 16 6 6 16 6 6 12 6 12 6
ADVANTAGES
Notes:
1. Ucw value is calculating by using warm edge spacer.
2. g value is calculating without external sunshading.
* good
** better
*** the best
****excellent
compatible
19
BUILDING
PHYSICS
DIMENSIONING / FORMULAS / EXAMPLES
ALUMINIUM AS
MATERIAL
ALUMINIUM IS A VERY YOUNG METAL, EXTRACTED FOR THE FIRST TIME IN 1854. COMMERCIALLY
PRODUCED AS A PRECIOUS METAL FROM 1886, ITS INDUSTRIAL PRODUCTION FOR CIVIL
APPLICATIONS ONLY ACHIEVED WIDE USE IN THE 1950’S.
NOW ALUMINIUM PLAYS A KEY ROLE FOR THE SUSTAINABILITY OF NEW BUILDINGS AND THE
RENOVATION OF EXISTING ONES. THANKS TO ITS PERFORMANCE PROPERTIES ALUMINIUM
CONTRIBUTES TO THE ENERGY PERFORMANCE, SAFETY AND COMFORT OF NEW BUILDINGS.
ADVANTAGES
ALUMINIUM COMBINES MANY ADVANTAGES:
23
ALLOYS
Aluminium in its pure form is a very soft ETEM profiles are extruded from
metal. Thanks to the addition of alloying the following alloys:
elements such as copper, manganese, EN AW-1050 [ Al 99.5 ]
magnesium, zinc, etc. and thanks to suitable EN AW-6060 [ Al Mg Si ]
production processes, the physical and EN AW-6063 [Al Mg0,7 Si]
mechanical properties can be varied in a wide EN AW-6061 [Al Mg1 Si Cu]
range to satisfy the requirements of a large EN AW-6005 [Al Si Mg]
number of different applications. EN AW-6082 [Al Si1 Mg Mn]
MAINTENANCE
FINISHING Apart from routine cleaning for aesthetic
POWDER COATING reasons, ETEM aluminium profiles do not
It is a type of paint that is applied as a dry require any maintenance which translates into
powder. Coating is applied on ETEM profiles a major cost and ecological advantage over
electrostatically and then is cured under heat lifetime of the product.
to allow it to flow and form a ‘’skin’’.
ETEM is authorized to use the quality sign
QUALICOAT for powder coatings on aluminium RECYCLING
for architectural applications. A wide range of
colors and gloss levels can be achieved. Aluminium scrap can be repeatedly recycled
ETEM also offers timber imitations painting, without any loss of value or properties.
in addition to all RAL colors. The technology In many instances, aluminium is combined with
EZY provides the following colors: Golden Oak, other materials such as steel or plastics,
Acero, Betulla, Mogano, Verde Scuro, Wenge, which are most frequently mechanically
Noce Fiammato, Noce Chiaro, Ciliegio Rosso, separated from aluminium before being molten.
Acacia Scuro, Ciliegio Antico, Noce Reale,
Ciliegio Reale.
24
DEFINITION OF
CURTAIN WALLING
Curtain walling usually consists of vertical and horizontal structural members, connected together and anchored to the
supporting structure of the building and infilled, to form a lightweight, space enclosing continuous skin, which provides, by
itself or in conjunction with the building construction, all the normal functions of an external wall, but does not take on
any of the load bearing characteristics of the building structure.
The curtain walling shall be sufficiently rigid to resist the declared wind loads for serviceability, both positive and
negative. It shall transfer the declared wind loads to the building’s structure, safely, via the fixings intended for that
purpose.
The stated definition is in accordance with European standards EN 13830 and EN 13119.
WIND ACTIONS
The main influence over the façade is wind action. Which depends mainly on the height of the curtain wall and location.
As guideline, the wind pressure values with respect to the structure height are given in the table below:
s uct ion in
h v q wind pr es s ur e s uct ion in middle z one
edge z one
Where:
h - building height, m
b - building width, m
v - wind velocity, m/s
q - wind load, kg/m2 / kN/m2
w p/s - wind pressure / suction, kN/m2
cp - correction factor
*Note: when calculating wind pressure wp the load is increased with 25%.
For calculating wind actions, when the wind velocity value is given in m/s, the following formula applies:
q = , kg/m2
25
ALLOWABLE DEFLECTIONS
wind and snow load resistance:
In accordance with EN 13830 and Eurocode 9 the allowable deflections are as follows:
Under the imposed winds only the maximum frontal deflection (d) of the curtain walling’s framing members shall not
exceed the following limits:
d≤ L/200, if L≤3000 mm;
d≤ 5 mm+ L/300, if 3000 mm< L < 7500 mm;
d≤ L/250, if L≥7500 mm.
when measured between the points of support or anchorage to the building’s structure (L).
In addition, the permissible deflection limits of the infill shall be taken into account (usually taken 15 mm, because of IGU).
In case of horizontal curtain walling’s framing member (transom) actin as a sill, the maximum frontal deflection (d) of the
curtain walling’s framing members (transom) shall not exceed the following limits:
d≤ L/200, if L≤ 3000 mm;
d≤ 5 mm + L/300, if L> 3000 mm.
L is the length of the curtain walling’s framing members measured between its point of support.
FIXING BRACKETS
Fixing brackets must fulfill the following criteria:
-T ransfer safely all loads from the facade resulting from the wind pressure, weight of mullions and transoms and
weight of infill panels
- Permit movement of mullions caused by thermal expansion
26
curtain wall system E85
h movable support - B
h fixed support - A
E 85 technical catalogue
01.2011 2.4
27
curtain wall system E85
Choosing the the
Choosing appropriate fixing bracket
appropriate fixing bracket
Simply
Simply supported beam with one fixed andone
supported beam with one fixed
movableand one movable support
support
Wpresure/suction
V = g. h . b H = 0-8 m ( middle zone)
v h wind load
g = 0,5 kN/m2
Wind load-pressure f1 = 1,25 dead load
h/
For determining the maximum q = 0,5 kN/m2 A fixed support
permissible wind load the
cp = 0,8 (wind pressure) B movable support
following formulae apply: b b
cp= - 0,5 ( wind suction )
Wp = f1 . q . cp . h/2 . b A
h = 3m
Wind load-suction b = 1,2m Fixed support
Ws = q . cp . h/2 . b
Own weight - dead load
where: V = g . h . b = 0,3 . 3 . 1,2 =
V - load, kN = 1,8 kN
g - weight of mullions, transoms
and infill panels, kN/m2 Wind load
Wp - wind pressure, kN Wp = f1 . q . cp . h/2 . b =
Ws - wind suction, kN = 1,25 . 0,5 . 0,8 . ( 0,5 . 3 ) . 1,2 =
f1 - correction factor
B
= 0,9 kN
q - dynamic load, kN/ m2
cp - correction factor (wind pressure) Ws = q . cp . h/2 . b =
h - floor height, m = 0,5 . (-0,5 ) . (0,5 .3 ) . 1,2 =
b - distance between mullions, m
= (-0,45 ) = 0,45 kN
H - buiding height, m
Movable support
A
Wind load-suction = (-0,45 ) = 0,45 kN
Ws = q . cp . h/2 . b
B
Wpresure/suction
h/
v h
Finally we choose the appropriate fixing bracket with bigger bearing capacity
than the calculated value.
b b Fixing bracket for fixed support must bear both calculated values for dead
A load and wind load.
Movable support Fixing bracket for movable support must bear just wind load.
E 85 technical catalogue
01.2011 2.5
28
Continuous simply supported beam
curtain wall system E85
Choosing the appropriate fixing bracket
Continuous simply supported beam
h/
A h/
wind load h
dead load
Finally we choose the appropriate fixing bracket with bigger bearing A fixed support
b b
capacity than the calculated value. A
Fixing bracket for fixed support must bear both calculated values for dead Movable support
load and wind load.
E 85 technical catalogue
01.2011 2.6
29
curtain wall system E85
Choosing the appropriate fixing bracket
Continuous beam with one fixed and two movable supports
B
vh
Wpresure/suction
Fixed support Example
B B
h
Own weight - dead load Initial data:
h/ V = g . 2h . b H = 0-8 m ( middle zone)
b b g = 0,5 kN/m2
A Wind load-pressure f1 = 1,25
h For determining the maximum q = 0,5 kN/m2
Fixed support permissible wind load the cp = 0,8 (wind pressure)
following formulae apply: cp= - 0,5 ( wind suction )
Wp = f1 . q . cp . h/2 . b h = 3,3m
B Wind load-suction b = 0,9m
B Ws = q . cp . h/2 . b
v h
Wpresure/suction
B
h
wind load
dead load b b
A
A fixed support
Movable support ( end)
B movable support Movable support ( end)
Wind load
Wind load-pressure Wp = f1 . q . cp . h/2 . b =
For determining the maximum = 1,25 . 0,5 . 0,8 .( 0,5 . 3,3 ) . 0,9 =
permissible wind load the = 0,74 kN
following formulae apply:
Wp = f1 . q . cp . h/2 . b
Movable support ( middle ) Wind load Ws = q . cp . h/2 . b =
Wp = f1 . f2 . q . cp . h . b = Wind load-suction = 0,5 . (-0,5) . ( 0,5 . 3,3 ) . 0,9 =
Wind load-pressure = 1,25 . 1,25 . 0,5 . 0,8 . 3,3 . 0,9 = Ws = q . cp . h/2 . b = (-0,37) = 0,37 kN
For determining the maximum = 1,86 kN
permissible wind load the
following formulae apply: Ws = f2 . q . cp . h . b =
Wp = f1 . f2 . q . cp . h . b = 1,25 . 0,5 . (-0,5) . 3,3 . 0,9 =
= (-0,93) = 0,93 kN
Wind load-suction
Ws = f2 . q . cp . h . b Finally we choose the appropriate fixing bracket with bigger bearing capacity
than the calculated value.
where: Fixing bracket for fixed support must bear both calculated values for dead
f2 - correction factor load and wind load.
Fixing bracket for movable support must bear just wind load.
E 85 technical catalogue
01.2011 2.7
30
Choosing the appropriate fixing bracket
curtain wall
Continious supported system
beam with one fixed support in the middle and two movable in the end E85
Choosing the appropriate fixing bracket
Continuous supported beam with one fixed support in the middle and two movable in the end
Fixed support Example
Movable support
B
Wind load-pressure Wind load v h
Wpresure/suction
B Fixed support
v h
Wpresure/suction
wind load A
h
dead load Finally we choose the appropriate fixing bracket with bigger bearing capacity
h/
A fixed support than the calculated value.
B movable support b b Fixing bracket for fixed support must bear both calculated values for dead
B
load and wind load.
Movable support Fixing bracket for movable support must bear just wind load.
E 85 technical catalogue
01.2011 2.8
31
curtain wall system E85
choosing the appropriate choosing the appropriate choosing the appropriate choosing the appropriate
mullion with Ix mullion with Ix transom with Ix transom with Iy
exceeding or equal exceeding or equal exceeding or equal exceeding or equal
to the required Ix to the required Ix to the required Ix to the required Iy
E 85 technical catalogue
01.2011 2.9
32
curtain wall system E85
Selection of mullion
SELECTION OF MULLION
2 2 a/2 b/2
I xb = w . (b/2) . h . 108 . 25 - 40 (b/2) +16 (b/2)
4
1920 . Eal . f h 2 h 2 a b
where:
I x - moment of inertia,cm4 2
w - wind pressure, kg/m2 I xa = w . (a/2) . h . 108 . 25 - 40 .(a/2)
4
+16 . (a/2)2 =
a, b - distance betweenmullions,m 1920 . Eal . f h2 h2
h - distance between fixing brackets,m
Eal - modulus of elasticity, kg/m2 = 60 . (1,5/2) . 44 . 108 . 25 - 40 . (1,5/2)2 +16 .(1,5/2)2 =
f - deflection, m - according to EN 13830 1920 . 7. 109 . 0,015 42 42
= 138,0 cm4
Total required moment of inertia:
2
I x = I a +I b I xb = w . (b/2) . h . 108 . 25 - 40 .(b/2)
4
+16 . (b/2)2 =
1920 . Eal . f h2 h2
Use ETEM catalogue to choose the appropriate mul-
lion with Ix exceeding or equal to the required Ix. 60 . (1,2/2) . 44 . 108 . 25 - 40 . (1,2/2)2 +16 .(1,2/2)2
= =
1920 . 7. 109 . 0,015 42 42
Example:
Initial data:
= 111,8 cm4
a = 1.5 m
b = 1.2 m
h=4m Total required moment of inertia:
w = 60 kg/m2
Eal = 7.109 kg/m2 I x = I a + I b = 138,0 + 111,8 = 249,8 cm2
f = l + 5 mm = 18,3 mm > 15 mm (0,015 m) The appropriate mullion is E 85104 with
300
f = 0,015 m in the following formulae: I x = 252,5 cm4
*
f should be 15 mm, because of limitation for IGU
E 85 technical catalogue
01.2011 2.10
33
curtain wall system E85
2. Continuous beam
Rectangular load
The required moment of inertia of a mullion, sup-
ported at three points, subjected to wind load is f
given by the following equation: h
I xa = w . (a/2) . h . 10
4 8
185 . Eal . f
a/2 b/2
a b
I xb = w . (b/2) . h . 10
4 8
185 . Eal . f f
where:
I x - moment of inertia,cm4
w - wind pressure, kg/m2
a, b - distance between mullions,m
h - distance between fixing brackets,m
I xa = w . (a/2) . h . 10 = I xb = w . (b/2) . h . 10 =
4 8 4 8
Eal - modulus of elasticity, kg/m2
f - deflection, m - according to EN 13830 185 . Eal . f 185 . Eal . f
*
f should be 15 mm, because of limitation for IGU
E 85 technical catalogue
01.2011 2.11
34
curtain wall system E85
Selection of transom
SELECTION OF TRANSOM
l ≤1 I x = w . (h0/2) . l . 10
8
h0
h0 120 . Eal . f
h0
2 2
I x = w . (h0/2) . l . 108 . 25 - 40 . (h0/2) +16 . (h0l2/2)
4
l >1 l
h0 1920 . Eal . f l2 l Example 2:
where:
h0
I x - moment of inertia,cm4
w - wind pressure, kg/m2 l
l - length of transom, m
Eal - modulus of elasticity, kg/m2 l
f - deflection, m - according to EN 13830
h0 - distance between transoms, m
Example 2:
Use ETEM catalogue to choose the appropriate tran- Initial data:
som with Ix exceeding or equal to the required Ix. l=2m
h0 = 1.5 m
Example 1: w = 60 kg/m2
Initial data: Eal = 7.109 kg/m2
l = 1,2 m
h0 = 3m l = 2 = 1,33 > 1
w = 60 kg/m2 h0 1,5
Eal = 7.109 kg/m2
f= l = 2 = 0,01 < 0,015m
l = 1,2 = 0,4≤1 200 200
h0 3
f = 0, 01 m in the following formula :
f = l = 1,2 = 0,006 >0,015m
200 200 2 2
I x = w . (h0/2) . l . 108 . 25 - 40 . (h02/2) +16 . (h02/2) =
4
1920 . Eal . f l l
f = 0, 006 m in the following formula :
= 60 . (1.5/2) . 24 . 108 . 25 - 40 . (1,5/2)2+16 . (1.5/2)2 =
1920 . 7 . 109 . 0,01 22 22
I x = w . (h0/2) . l . 10 = 60 . (3/2) . 1.2 9. 10 = 2,1 cm4
8 8
The appropriate transom is E 85300 with I x = 2,7 cm The appropriate transom is E 85302 with I x = 19,5 cm
E 85 technical catalogue
01.2011 2.12
35
curtain wall system E85
Calculation of the required glass pane thickness
CALCULATION OF THE REQUIRED GLASS PANE THICKNESS
G=t. ρglass . lg . hg
where: 10 . lg . hg . w 10 . 2 .1,5 . 60
t - minimum theoretical thickness, mm t= = = 5mm
72 72
ρ glass - specific weight of glass = 2,5 kg/m2 x mm
lg - the smallest dimension of the glass pane,m
hg - the largest dimension of the glass pane,m For double glazing treq = 5 . 1,5 = 7,5 mm
hg lg . 10 . w
<3 t=
lg 4,9
hg 1,5
= = 0,75 ≤ 3
lg 2
E 85 technical catalogue
01.2011 2.13
36
curtain wall system E85
Glass pane weight
GLASS PANE WEIGHT
48 . Eal . f1
a a
l
I y1 = G . a . 10 . (3 . l2 - 4 . a2) =
8
f= , or max 3 mm
500 48 . Eal . f
E 85 technical catalogue
01.2011 2.14
37
THERMAL TRANSMITTANCE COEFFICIENT UCW OF CURTAIN WALL
according to EN ISO 12631
ΣAg.Ug+ΣAp.Up+ΣAf.Uf+ΣAm.Um+ΣAt.Ut+Σlg.ψg.+Σlp.ψp
Ucw= (1)
Acw
Acw=Ag+Ap+Af+Am+At
visible curtain wall area, (m 2)
Ucw - thermal transmittance of the curtain wall, (W/m 2.K)
calculated by formula (1)
Ug - thermal transmittance of the glass, (W/m 2.K)
by the glass manufacturer
2
ψg - linear thermal transmittance of the glass spacer, (W/m .K)
d
ψp - linear thermal transmittance of the panel spacer, (W/m 2.K)
Ag - visible glass area , (m 2)
Ap - visible panel area , (m 2)
ψp Ucw Am,e Uf Af,e ψg Ug Ag,e
Af - aluminium frame area , (m 2)
Am - aluminium mullion area , (m 2)
At - aluminium transom area , (m 2)
U=1/R R=d/λ
R - thermal resistance, (W/m 2.K)
d - panel thickness, (m)
1-1 4-4
λ- thermal conductivity, (W/m 2.K)
Af Am Af Am
H1 4
5 4
3
5
Ag 3-3 6-6
6 5
5
6
At At
Af
L1 L1 /2
L2 /2
38
E85 technical catalogue
curtain wall system E85
E 85 technical catalogue
01.2011 2.16
TABLES
TYPOLOGIES / LIST OF PROFILES / CHARACTERISTICS
curtain wall system E85
curtain wall system
length
E85
code length
weight
description
code profile weight
ext.perimeter
static values
profile static values
description ext.perimeter
vis.perimeter
vis.perimeter
50
X 6,6 m Ix= 27,70 cm4 Iy= 19,39 cm4
E85100 Y 2006 g/m Wx= 6,96 cm3 Wy= 7,75 cm3
50
mullion 448 mm ex= 2,50 cm еy= 3,98 cm
149 mm ix= 1,93 cm iy= 1,62 cm
66
70
X 6,6 m Ix= 58,04 cm4 Iy= 23,79 cm4
E85101 Y 2211 g/m Wx= 12,19 cm3 Wy= 9,51 cm3
50
90
X 6,6 m Ix= 104,15 cm4 Iy= 28,19 cm4
E85102 Y 2417 g/m Wx= 18,65 cm3 Wy= 11,27 cm3
50
110
X 6,6 m Ix= 169,00 cm4 Iy= 33,43 cm4
E85103 Y 2665 g/m Wx= 26,15 cm3 Wy= 13,37 cm3
50
130
X 6,6 m Ix= 252,55 cm4 Iy= 38,03 cm4
E85104 Y 2881 g/m Wx= 34,40 cm3 Wy= 15,21 cm3
50
160
X 6,6 m Ix= 417,97 cm4 Iy = 44,95 cm4
E85105 Y 3205 g/m Wx= 46,90 cm3 Wy= 17,98 cm3
50
180
X 6,6 m Ix= 752,98 cm4 Iy= 60,74 cm4
E85106 Y 4628 g/m Wx= 74,89 cm3 Wy= 24,30 cm3
50
200
X 6,6 m Ix= 1003,76 cm4 Iy= 71,32 cm4
E85107 Y 5165 g/m Wx= 91,01 cm3 Wy= 28,53 cm3
50
200
X 6,6 m Ix= 1326,00 cm4 Iy= 80,93 cm4
E85108 Y 6423 g/m Wx= 116,21 cm3 Wy= 32,37 cm3
50
230
X 6,6 m Ix= 2161,67 cm4 Iy= 110,05 cm4
E85109 Y 8416 g/m Wx= 162,85 cm3 Wy= 44,02 cm3
50
35.3
X 6,6 m Ix= 36,82 cm4 Iy= 18,31 cm4
E85120 2311 g/m Wx= 8,70 cm3 Wy= 7,29 cm3
Y
mullion for
50
70
E85121 X 6,01 m Ix= 30.80 cm4 Iy= 15,80 cm4
3rd level Y 2165 g/m Wx= 8,50 cm3 Wy= 6.32 cm3
50
6,6 m
E19641
7.5
130 g/m
cover cap 81 mm
26.4 26 mm
Y
90
X
90
E85140 X
6,6 m Ix= 6,14 cm4 Iy= 5,17 cm4
suppl. Y 999 g/m Wx= 2,79 cm3 Wy= 2,07 cm3
50
X
E85142 6,6 m Ix= 3,50 cm4 Iy = 3,50 cm4
48
inner suppl. Y 810 g/m Wx= 1,38 cm3 Wy= 1,38 cm3
48.2
X
E85143 44
outer .3 6,6 m Ix= 3,38 cm4 Iy= 3,38 cm4
Y 972 g/m Wx= 1,89 cm3 Wy= 1,89 cm3
suppl.
35.7
240 mm ex= 1,79 cm еy= 1,79 cm
mullion 0 mm ix= 0,97 iy= 0,97
cm cm
profile 90° 35.7
15
X 6,01 m Ix= 2,78 cm4 Iy= 7,64 cm4
E85300 Y 1015 g/m Wx= 1,33 cm3 Wy= 3,06 cm3
2nd level
50
29
X 6,01 m Ix= 7,12 cm4 Iy = 11,55 cm4
E85301 Y 1293 g/m Wx= 2,76 cm3 Wy= 4,62 cm3
2nd level
50
49
X 6,01 m Ix= 19,52 cm4 Iy= 15,08 cm4
E85302 Y 1455 g/m Wx= 6,00 cm3 Wy= 6,03 cm3
2nd level
50
69
X 6,01 m Ix= 45,83 cm4 Iy= 21,60 cm4
E85303 Y 1785 g/m Wx= 10,54 cm3 Wy= 8,64 cm3
2nd level
50
89
X 6,01 m Ix= 98,87 cm4 Iy= 26,45 cm4
E85304 Y 2276 g/m Wx= 18,06 cm3 Wy= 10,58 cm3
2nd level
50
109
X 6,01 m Ix= 160,52 cm4 Iy= 31,06 cm4
E85305 Y 2492 g/m Wx= 25,02 cm3 Wy= 12,42 cm3
2nd level
50
129
X 6,01 m Ix= 240,58 cm4 Iy= 35,67 cm4
E85306 Y 2708 g/m Wx= 32,66 cm3 Wy= 14,27 cm3
2nd level
50
159
X 6,01 m Ix= 398,72 cm4 Iy= 42,59 cm4
E85307 Y 3032 g/m Wx= 45,28 cm3 Wy= 17,04 cm3
2nd level
50
E85600 X
6,01 m Ix= 22,08 cm4 Iy= 20,50 cm4
2nd level Y 1080 g/m Wx= 5,85 cm3 Wy= 7,07 cm3
58
E85601 X
6,01 m Ix= 43,64 cm4 Iy= 24,98 cm4
2nd level Y 1229 g/m Wx= 9,25 cm3 Wy= 8,61 cm3
58
E85602 X
6,01 m Ix= 74,28 cm4 Iy= 29,47 cm4
2nd level Y 1380 g/m Wx= 13,10 cm3 Wy= 10,16 cm3
58
E85603 X
6,01 m Ix= 115,13 cm4 Iy= 33,95 cm4
2nd level
58
Y 1531 g/m Wx= 17,37 cm3 Wy= 11,71 cm3
suppl. 403 mm ex= 2,90 cm еy= 6,63 cm
transom 315 mm ix= 4,50 cm iy= 2,45 cm
129
6
X 6,01 m Ix= 0,41 cm4 Iy= 3,78 cm4
E85350 Y 605 g/m Wx= 0,35 cm3 Wy= 1,51 cm3
3rd level
50
15
X 6,01 m Ix= 1,49 cm4 Iy= 7,42 cm4
E85360 Y 948 g/m Wx= 0,94 cm3 Wy= 2,97 cm3
3rd level
50
35
X 6,01 m Ix= 8,70 cm4 Iy= 12,03 cm4
E85351 Y 1164 g/m Wx= 3,69 cm3 Wy= 4,81 cm3
3rd level
50
55
X 6,01 m Ix= 24,25 cm4 Iy= 16,64 cm4
E85352 1380 g/m Wx= 7,37 cm3 Wy= 6,65 cm3
Y
3rd level
50
75
X 6,01 m Ix= 58,19 cm4 Iy= 21,49 cm4
E85353 1874 g/m Wx= 12,82 cm3 Wy= 8,60 cm3
Y
3rd level
50
95
X 6,01 m Ix= 102,48 cm4 Iy= 26,10 cm4
E85354 Y 2090 g/m Wx= 18,46 cm3 Wy= 10,44 cm3
3rd level
50
115
X 6,01 m Ix= 162,24 cm4 Iy= 30,71 cm4
E85355 Y 2306 g/m Wx= 24,72 cm3 Wy= 12,29 cm3
3rd level
50
135
X 6,01 m Ix= 239,09 cm4 Iy= 35,32 cm4
E85356 Y 2522 g/m Wx= 31,58 cm3 Wy= 14,13 cm3
3rd level
50
165
X 6,01 m Ix= 389,88 cm4 Iy= 42,24 cm4
E85357 Y 2846 g/m Wx= 42,93 cm3 Wy= 16,90 cm3
3rd level
50
185
X 6,01 m Ix= 516,42 cm4 Iy= 46,85 cm4
E85358 3062 g/m Wx= 51,19 cm3 Wy= 18,74 cm3
Y
3rd level
50
205
X 6,01 m Ix= 665,65 cm4 Iy= 51,46 cm4
E85359 3278 g/m Wx= 60,01 cm3 Wy= 20,58 cm3
Y
3rd level
50
235
X 6,01 m Ix= 882,24 cm4 Iy= 58,94 cm4
E85369 3448 g/m Wx= 71,59 cm3 Wy= 23,58 cm3
Y
3rd level
50
50
21.2
E85380 X 6,01 m Ix= 1,67 cm4 Iy= 8,74 cm4
3rd level Y 820 g/m Wx= 1,54 cm3 Wy= 3,50 cm3
50
E85261
sash for
projected/parallel X 6,01 m Ix= 51,45 cm4 Iy= 8,94 cm4
1649 g/m Wx= 9.87 cm3 Wy= 2.99 cm3
window Y
еy= 5.21
49.6
E85460
X 6,01 m Ix= 49,71 cm4 Iy= 8,06 cm4
1430 g/m Wx= 7,78 cm3 Wy= 2,53 cm3
54.5
Y
frame for ex= 3,19 еy= 6,38
415 mm cm cm
triple glazing ix= 3,32 iy= 1,33
186 mm cm cm
109.7
Y
double 415 mm ex= 3,19 cm еy= 4,83 cm
glazing 186 mm ix= 2,77 cm iy= 1,34 cm
90.3
18
anodized 55.5 mm
profile 0 mm
E85614 6,01 m
external 208 g/m
27.9
glass 19.2 99 mm
support 43 mm
E85615 6,01 m
external 200 g/m
glass 22 101 mm
14.8
support 46 mm
E85220 6.01 m
frame for 2585.2 g/m
98.3
roof
window 240 mm
110.2
L85-11
E85420 6.01 m
sash for 1567.2 g/m
19.44 cm4 Iy= 8.49 cm4
61.8
320 mm Ix=
roof
window 53.8
132 mm
E85752 6.01 m
21.4
E85618 6.01 m
77.9
4,4 m
E2308 159 g/m
operating 48 mm
4.3
19.7
rod 0 mm
4,40 m
4.7
6,01 m
4.8
6,01 m
10.2
E85700 435 g/m
pressure
47.6 151 mm
plate
23.6 0 mm
6,01 m
E85745 655 g/m
pressure
47.6 205 mm
plate
0 mm
E85701 6,01 m
10.2
E85702 6,01 m
5.5
E85703 6,01 m
pressure 1034 g/m
25.9
E85704 6,01 m
pressure 1121 g/m
28.2
E85705 6,01 m
pressure 1204 g/m
31.6
E85706 6,01 m
pressure 1291 g/m
35.9
E85707 6,01 m
pressure 1455 g/m
plate for 413 mm
44
E85708 6,01 m
pressure 1620 g/m
plate for 455 mm
53.8
E85740
19.1
6,01 m
pressure 510 g/m
plate for 42.2 170 mm
corner 90° 0 mm
18.2
E85741 6,01 m
pressure 508 g/m
plate for 46.2 169 mm
corner 135° 0 mm
L85-14
6,01 m
E85809
9.3
218 g/m
pressure
174 mm
plate 65.4
0 mm
6,01 m
E85753
10.2
50
418 g/m
pressure
170 mm
plate
41 mm
6,01 m
12.3
6,01 m
E85719 126 g/m
6
cover cap 87 mm
24.3
for E85709 37 mm
6,01 m
10.2
E85751 6,01 m
cover cap
4.9
54 g/m
for E85750, 45 mm
E85753 and 13.8
16 mm
E85752
L85-15
6,01 m
E85711 289 g/m
50
cover cap 144 mm
12
75 mm
6,01 m
E85712 332 g/m
50
6,01 m
E85713 400 g/m
50
6,01 m
E85714 432 g/m
50
6,01 m
E85715 467 g/m
50
6,01 m
E85716 821 g/m
50
6,01 m
E85718 1779 g/m
50
6,01 m
E85720 467 g/m
50
6,01 m
E85721 281 g/m
50
6,01 m
E85722 462 g/m
50
6,01 m
E85723 1207 g/m
50
6,01 m
E85724 1627 g/m
50
6,01 m
E85730 262 g/m
cover cap 50 132 mm
67 mm
12
6,01 m
E85731 373 g/m
cover cap 171 mm
corner 90° 45
17.6
61 mm
6,01 m
E85732 446 g/m
cover cap 49.8 206 mm
20.4
corner 135° 79 mm
6,01 m
16.6
6,01 m
E85727 1312 g/m
50
6,01 m
E85728 749 g/m
50
6,01 m
E85717 50
1426 g/m
cover cap 388 mm
251 mm
100
6,01 m
E85790 - g/m
cover cap
51
- mm
inox - mm
15
6,01 m
E85791 - g/m
cover cap
51
- mm
inox - mm
20
6,01 m
8.7
E85640 97 g/m
6
spacer 6 mm 59 mm
10
6 mm
6,01 m
12.7
E8611
10
130 g/m
spacer 10 mm 82 mm
10 10 mm
L85-22
6,01 m
14.7
E85641
12
140 g/m
spacer 12 mm 10
90 mm
12 mm
6,01 m
20.7
spacer 18 mm 98 mm
10
18 mm
6,01 m
E85643 286 g/m
28.9
26
spacer 26 mm 159 mm
10 26 mm
6,01 m
9.9
spacer 7,5° 61 mm
10
6 mm
6,01 m
11.3
6.2
6,01 m
12.8
E85652
6.5
117 g/m
spacer 22,5° 10
69 mm
7 mm
L85-23
6,01 m
14.6
E85653
6.9
128 g/m
spacer 30° 75 mm
10
7 mm
6,01 m
16.8
E85654
7.5
142 g/m
spacer 37,5° 82 mm
10
8 mm
6,01 m
19.8
8.5
E85924TR 6,01 m
spacer for 70 g/m
structural 11 53 mm
9.3
glazing 0 mm
E85990 6,01 m
spacer for 19.3 229 g/m
structural 138 mm
24
glazing 0 mm
E85923
spacer for 6,01 m
139 g/m
9
structural
glazing for 16 71 mm 0
polygonal mm
facade
L85-24
22 6,01 m
E85924TR 307 g/m
glazing clip 68 mm
8.9
0 mm
6,01 m
8.6
6,01 m
10
6,01 m
E85902 383 g/m
glazing 44.9 122 mm
support
0 mm
6,01 m
E85916
17.2
408 g/m
glazing
48.9 130 mm
support
0 mm
17.2
6,01 m
E85910 446 g/m
glazing
54.9 142 mm
support
0 mm
L85-25
2,01 m
E85912
9.7
246 g/m
glazing
29.8 79 mm
support
0 mm
6,01 m
E85917
9.7
266 g/m
glazing
33.3 86 mm
support
0 mm
2,01 m
E85914 306 g/m
glazing 39.8 99 mm
support
9.7
0 mm
210
210
E85901 6,01 m
5
E85903 X
6,01 m
suppl. profie Y 2036 g/m
for fixing 271 mm
14.3
108
bracket 0 mm
X
5,00 m Ix= 37,13 cm4 Iy= 37,13 cm4
7528 Y 1847 g/m Wx= 12,38 cm3 Wy= 12,38 cm3
insert for
60
6,01 m
E85290 448 g/m
spacer for 23
126 mm
etalbond 21.1 0 mm
6,01 m
E85291
19
400 g/m
spacer for 134 mm
etalbond 25.1
0 mm
E85610 6,01m
7.5
E85611 6,01 m
suppl. profile 346 g/m
for sealing 43
176 mm
membrane 0 mm
E85612 6,01 m
suppl. profile 381 g/m
for sealing 170 mm
24.5
43
membrane 0 mm
E85620 6,01 m
wall 984 g/m
40
attachment 277 mm
profile 70 0 mm
L85-28
E85621 6,01 m
wall 999 g/m
40
attachment 285 mm
profile 74 0 mm
25
6,01 m
E8700 479 g/m
cover cap
60
231 mm
anti-burglar
111 mm
23
6,01 m
E8701 460 g/m
cover cap
60
223 mm
anti-burglar
107 mm
E8620 6,01 m
9.6
6,01 m
50009
10
1350 g/m
flat bar
120 mm
anti-burglar 50 0 mm
glazing 207 mm
support 29.6
0 mm
E85803
reinforced X
6,01 m Ix= 12,08 cm4 Iy= 3,44 cm4
glazing Y 1250 g/m Wx= 4,45 cm3 Wy= 1,55 cm3
44.4
E85804
reinforced X 6,01 m Ix= 3,50 cm4 Iy= 1,18 cm4
glazing Y 889 g/m Wx= 1,89 cm3 Wy= 0,86 cm3
27.6
E85807
reinforced 6,01 m Ix= 13.15 cm4 Iy= 1,68 cm4
15.6
X
glazing Y 1311 g/m Wx= 4,49 cm3 Wy= 1,22 cm3
27.6
6,01 m
E85805 6.4
210 g/m
reinforcement 44 mm
additional
15.6
0 mm
L85-31
mullions, inserts, connectors and flush transoms 2nd and 3rd level
2nd level 2nd level flush 3rd level 3rd level flush
roof transom + suppl. transom + suppl.
code insert flush flush
connector profile profile
transom transom
E85100 - E85960 E85302 - E85352 -
E85101 E85951 E85960 E85303 E85300+E85600 E85353 E85380+E85600
E85102 E85952 E85960 E85304 E85300+E85601 E85354 E85380+E85601
E85103 E85953 E85960 E85305 E85300+E85602 E85355 E85380+E85602
E85104 E85954 E85960 E85306 E85300+E85603 E85356 E85380+E85603
E85105 E85955 E85960 E85307 - E85357 -
E85106 E85956 E85969 - - E85358 -
E85107 E85957 E85969 - - E85359 -
E85108 E85958 E85969 - - E85359 -
E85109 E85959 E85969 - - E85369 -
P85-1
10
2.5
2.8
20
10
insert E85956
50
44.4
45
50
50
10
20 10 20
insert E85957
10
10 10 10 10
20
16
E85106 E85107
2.8
2.5
10
16 180 200
196 216
24.5
66
2.5
24.5 8 155.5 12
50
3
10
19
20
E85100
10
insert E85958
4
44
50
50
10
insert E85951
86
70
39
E85101
10
4
20
10 E85108
insert E85952
3
106
90
59
E85102 16 200
216
4
insert E85953
126
110
79
4
10
insert E85954
146
130
20
99
42
50
50
10
insert E85955
10
176
160
129
20
E85105 E85109
10
4
4
46 16 230
2 2
246
50
P85-2
scale 1:1
68.8
45.8
90
16.3 32
32.7
insert E85972
E85152
insert E85973
52.7
E85153
110
insert E85974
72.7
E85154
130
mullion E85155
insert E85975
102.7
E85155
13.5
160
E85151
suppl. profile E85151
22.5 32 mullion E85155
P85-4
scale 1:1
split mullions, inserts and flush transoms 2nd and 3rd level
2nd level 2nd level flush 3rd level 3rd level flush
code insert flush transom + suppl. flush transom + suppl.
transom profile transom profile
E85152 E85972 E85304 E85300+E85601 E85354 E85380+E85601
E85153 E85973 E85305 E85300+E85602 E85355 E85380+E85602
E85154 E85974 E85306 E85300+E85603 E85356 E85380+E85603
E85155 E85975 E85307 - E85357 -
P85-3
50
E85120
20 10 20
10 10 10 10
16
E85350
E85300
24.5
35.3
2.5
E85301/E85351
81
65
E85302/E85352
38
26.4
27.7
2
appropriate transom
2nd and 3rd level
2nd level 3rd level
code
transom transom
E85300 E85350/85360
E85120 E85301 E85351
E85302 E85352
P85-5
scale 1:1
50
E85121
20 10 20
10
10 10 10 10
mullion E85121
24.5
70
60
26.4
35.5
E19641
cover cap E19641 7.5
19.5 11 19.5
P85-5.1
scale 1:1
mullion 90°
20 10 10 10 15.5 40.5
10 10 10 10 15.5 24.5
16
40.5
24.5
2.5
15.5
15.5
106
90
10
10
2.5 2.5
60.5
10
10
60.5
10
10
20
2.5
10
E85130 90 16
106
insert 7528
2nd level 2nd level flush 3rd level 3rd level flush hidden
code insert flush transom + suppl. flush transom + suppl.
transom profile transom profile
E85130 7528 E85304 E85300+E85601 E85354 E85380+E85601
P85-6
scale 1:1
mullion 135°
cover cap E85732
pressure plate E85741
24
16
10
10
45°
118
90
16.3
60.8
119.7
insert E85973
E85135
135°
76.9
76.9
22.5°
142.1
2nd level 2nd level flush 3rd level 3rd level flush hidden
code insert flush transom + suppl. flush transom + suppl.
transom profile transom profile
E85135 E85973 E85304 E85300+E85601 E85354 E85380+E85601
P85-7
scale 1:1
30°-90°
split rotating mullion
40.1
E85140
50
any mullion
30
10 20
16
36
26.5
23.3
55.6
19.6
E85141
scale 1:1
48
19.8
48.2
14.9
90
°
E85142
3.3
any mullion
P85-9
scale 1:1
44
35.7
4.4
.3
31.3
5 26.3
E85143
26.3
31.3
35.7
4.4
5
scale 1:1
P85-11
1.5
2
10
10
23.5
20
20
∅1
7
10
10
∅1
4
47
46
50
50
50
10
10
10
10
20
20
E85301 E85302 E85303 E85304 E85305 E85306 E85307
10
10
2
1.5
16 15 16 29 49 69 89 109 129 159
31 45 65 85 105 125 145 175
2 2 2 2 2 2 2 2 2 2
6 7 27 47 67 87 107 127 157 177 197 226 3
E85350 E85360
2
11
11
20
20
∅1 23.5
7
9
∅1
4
46
50
50
50
10
10
9
9
20
20
E85351 E85352 E85353 E85354 E85355 E85356 E85357 E85358 E85359 E85369
11
11
2
10 6 10 15 35 55 75 95 115 135 165 185 205 235
16 25 45 65 85 105 125 145 175 195 215 245
P85-12
scale 1:1
E85E85 technical
technical catalogue
catalogue E85 technical catalogue
91 91
curtain
curtain wall
wall system
system E85
E85
1.4
55.2
58
55
58
15.2
1.4
1.5
69 89 109 129
15
E85800
20
50
20
10
20
46
50
28
50
11
E85380
2
P85-13
21.2
scale 1:1
transom E85370
suppl. profile E85670
30°-9
0°
10
10
40
9
27.5
E85370
11
55 10
65
supplementary profile for E85370 2nd level split transom for conservatory
transom E85320
51
30°-9
0°
12
E85320
68.9
13.2
10
42
32
10
E85670
20
10
29 16
45
P85-14
scale 1:1
38.5
54.5
RAL 9005
E85410
16
60 30.3
90.3
Combinations:
transoms 2nd and 3rd operating rods
level with frame E85410
19.7
2nd level 3rd level
code
transom transom
4.3
- E85369
E2309
Frame E85410 is suitable
for sashes spacer
E85250/E85251
19
E85915
4.8
P85-15
scale 1:1
RAL 9005
E85460
16
60 49.7
109.7
transom transom
E2308
E85303 E85353
E85304 E85354
E85305 E85355
E85306 E85356 23.5
E85460
E85307 E85357
- E85358
4.7
- E85359
E2309
- E85369
E85915
4.8
P85-16
scale 1:1
sash for thermal-break projected window with insert for triple glazing
98.2
56.2 42
insert
E70650-
suppl.
20.1
19
anodized
profile
E85261
5.7
49.6
49.6
12
18.5
17.5
6.4
11 23 23.4 32.9 7.9
98.2
E85614 E85615
sash E85261
E85806
P85-17-1
scale 1:1
sash for thermal-break projected window with insert for double glazing
79
56.9 22.1
insert
E70650-
suppl. sash E85250 or E85251
18.9
20
anodized
profile
E85250
5.7
49.5
49.5
13
18.5
16.5
E85614
6.4
11 23 20 17.1 7.9
79
79
56.9 22.1
E85615
18.9
20
E85251
5.7
49.5
49.5
12
6.4
scale 1:1
57.8
40.8 17
22.8
33.6 24.2
61.4
38.9 22.5
17
49
32
E85400
scale 1:1
49.3
98.3
30
E85220
19
88.7 21.5
110.2
68.8
49.8
E85618
20.4 68.3
P85-19
88.7
scale 1:1
E85752
21.4
22.1 16 28.3 25.7
92.1
14.6
44.4 9.4
53.8
P85-20
scale 1:1
5
26. E85706
10.5
E85703
E85700 30°
7.5°
25.9
35.9
10.2
14
47.6
70.7
165° 120°
97
E85707
E85701
10.2
7.4
.9
37.5°
36
15.8 E85704
44
46.4
28.2
15°
14
14
80.8 105°
150° 110.2
41.6
E85708
13.4
E85705
23.6
E85745 21.2
10.2
31.6
22.5°
45°
.2
47
53.8
47.6
14
135°
89.8
E85808
90°
9.3
14
E85809
172.5° 119.2
65.4
P85-21
scale 1:1
E85 E85
technical catalogue
technical catalogue E85 technical catalogue
103 103
curtain
curtain wall
wall system
system E85
E85
cover caps
7.5
18
E85721
10.5
50
∅4
25
40
1.3 E85722
15
50
∅8
129
160
69
100
∅4 ∅4
1.4 E85723 1.4 E85724
47.4 47.4
16.3
1.4 1.4
31
31
50 50
P85-22
scale 1:1
13.8 E85751
49.9 47
4.9
E85711 E85716 E85717 E85718
16.8 14.4 16.8
12
E85750
28.9
10.2
50
45.4 48
60
47.4
E85712 47.4 17.8 14.4 17.8
16.3
E85753
1.5
5.8
15
10.2
8
100
4.4
17 16 17 ET130500.00
50 50
50
24.3
47.4 7.1 10 7.1
E85713
5.9
5
E85719
6.3
165
20
12.5 25 12.5
47.4
E85727
50
7.2 5.1
10.5
12.3
3-12mm
E85730
25
70.4
12
50 50
58
100
70
E85702
5.5
50
47.4
E85715 50
47.4
16.3
E85808
E85720
16.3
1.5
25
30
16.6
50 47.4
E85809
50 50 70.3
50
Note:
P85-23
For E85709 and E85719 use mechanical support thru 1.5m
scale 1:1
E85741
18
30
13.5
13.5
42
.2
12
22.5°
90
46.2
°
45°
32
31.5
10.8
E85732
32
20.6
20.6
21.2
22.5°
45
90
50
°
E85791 inox
E85790 inox
20
15
51 51
note: cover caps E85790 and E85791 have to be used with special pressure plate !
P85-24
scale 1:1
14.8 E85990 22
E33881
4
6
8.9
6.8
9.2
24
14.8
10 12
19.3
glazing clips
43.6 43.6
E85920 E85903
8.6
5
5
10
16
11
9.3
7.3
9
E85923 E85924TR
P85-25
scale 1:1
transom connectors
∅4
transom connector E85908
45.6
45.6
E85906
E85907
40 45.7
42.6
10
E85908
E85994
43.2 6.5
15.3
1.5
13.8
13.8
45.6
E85904
E85905
P85-26
scale 1:1
inserts
45.2
12.6
4
∅6.
12.6
4
∅6.
38.2
18.4
E85951
mullion E85101
7.2
38.4
E85952
mullion E85102
58.2
7.2
143.7
123.9
58.4
E85953
mullion E85103
7.2
78.2
78.4
E85954
mullion E85104
7.2
98.2
mullion E85106
20
E85956
108.4
E85955
mullion E85105
128.2
7.2
7.2
45.2 44.2
P85-27
scale 1:1
inserts
12.6
12.6
4
∅6. 4
∅6.
20 20
154.7
163.7
134.9
143.9
E85958
mullion E85108
E85957
mullion E85107
7.2
7.2
43.6 43.2
P85-28
scale 1:1
8
8.2
6.2 28.4 6.2
8
8.2
∅5
∅5
183.4
216
149.1
181.7
mullion E85109
E85960 E85969
29.2 28.8
8.4
8
P85-29
45.2 40.8
scale 1:1
6.8
∅6.4
31.9
18.3
mullion E85152
E85972
6.8
38.3
mullion E85153
51.9
E85973
6.8
58.3
mullion E85154
71.9
E85974
6.8
mullion E85155
88.3
101.9
E85975
6.8
15.5
P85-30
scale 1:1
Y E85802
E85801
X
156
X
111
transom E85357
transom E85306
45.4 45.4
scale 1:1
spacers
37.5°
14.1
E85640 7.5° E85650 E85654
7.5
7.2
6
6
10 10 10
E8611
E85651
10
8.6
45°
6.2
17.1
E85655
8.5
10 10
10
E85641
22.5°
E85652
12
10.1
6.5
10 10
E85642
18
E85653
11.9
6.9
10 10
0.9
15.8
15.5
15.3
32
40.3
10 E85911
44.2
23.9
23
R3
24.4
5
7.2
E85966
9.6 10.4 9.6
P85-32
scale 1:1
15.6
17.2
E85902 E85912
9.7
6.4
48.9
6.3 42.6 33.3
3.3
a = 36 a = 30
17.2
E85916 E85917
9.7
54.9
6.3 48.6
39.8
a = 42 3.3
a = 36.5
17.2
E85910 E85914
9.7
51.5 36
38.6 32.7
27.6
15.6
15.6
15.6
E85807 ET071200.00 53 mm
scale 1:1 E85805 ET994471.00 - -
46 28
150°
60°
20 E85610
7.5
3
37.5
10.6
40
20.8
29.6
E85621
2.5
74
10
13.5
E85611
24.5
14.5
11
46 24 5 38
43
37.5
33 10
40
10
13.5
E85612
E85620
2.5
24.5
14.5
11
70
5 38
43
spacers for etalbond structural glazing
E85291
E85290 25.1
21.1 7
5.7
9.3
11.4
15
19
19
18.7
23
5.7
12
8
12.1
7
P85-34
scale 1:1
6.8 6.8
77.2 52 77.2
47.1 6 51.8 6 47.1
5
26
141.5
E85901
150
100
96
98
97
108
106
105
8.5
9
8
8
7.5 6.8 210
220 158
14.3
84
6.8
77.2 53.4 43.2 53.4 30.4
117.5
121
31.2
140
140
97
92
105
100
81.5
90
78
E85967 E85913 E85918 E85961
11 8
∅5
8.5
8
P85-35
scale 1:2
E85E85 technical
technical catalogue
catalogue
121
curtain
curtain wall
wall system
system E85
E85
anti-burglar profiles
60
60
57.4
57.4
E8700
E8701
11.3
9.3
25
23
47.5
4 39.5 4
E8620
4
9.6
57.6
45
37
47001
4
50009 60
3 54 3
10
50
54
60
7528
insert for E85130
3
P85-36
scale 1:1
COVER CAP
SECTIONS / DETAILS
50 tapping screw
DIN 7981 ST5.5x65-C-H
1 15 10 10 15 1
cover cap E85713
pressure plate E85700
butyl seal ET133553.00 (optional)
5
gasket ET130500.00
20
25
15
5
8
14
46
min 6
14
6
10
gasket ET130470.00
flange ET076664.00
211
5 5
89
18 20 18
transom E85354
mullion E85104
41
E85CP5.01
50
scale 3/4
3
10.8
56.3
50
50
12.8
5
12.2
flange ET076664.00
fixing part ET071113.00
transom E85354
silicone flange ET076680.00 behind
thermal insulation spacer ET080519.00
shim
8 14 4 14 6 95 41
4
15 5 46 10 130
mullion E85104
E85CP5.02
scale 3/4
50 tapping screw
DIN 7981 ST5.5x45-C-H
1 15 10 10 15 1
cover cap E85713
pressure plate E85700
butyl seal ET133553.00 (optional)
5
gasket ET130500.00
20
25
15
6 5
min 6
28
16
6 4 6
10
5 5
89
18 20 18
transom E85354
mullion E85104
41
50
Note:
E85CP5.03
1. The thermal transmittance coefficient of the curtain wall is reduced up to 45%when compared to
the standard solution with PVC profile
2. For combinations with glazing from 28mm to 32mm could be used thermal insulation spacer ET080518.00/ ET080172.00 instead
ET080172.00.
scale 3/4
50 tapping screw
DIN 7981 ST5.5x45-C-H
1 15 10 10 15 1
cover cap E85713
pressure plate E85700
5
gasket ET130500.00
15
6 5
min 6
28
16
6
10
10
gasket ET130470.00
thermal insulation spacer ET080518.00/ ET080172.00
5 5
tapping screw
DIN 7981 ST4.8x19-C-H
89
18 20 18
transom E85304
6
mullion E85104
41
50
E85CP5.04
scale 3/4
56.3
50
50
10
5
15
shim
6 16 6 10 89 41
28 10 130
mullion E85104
E85CP5.05
Note:
1. in case of 2nd level drainage, it is obligatory to use 150 mm butyl seal tape in both directions of the cross zone. see detail E85M8.29 / 8.29
2. in case of roof constructions, conservatories, facades with inclinations and polygonal facades with 2nd level drainage, it is obligatory to use butyl seal tape
in both directions.
scale 3/4
gasket ET130470.00
plastic shim
min 6
tapping screw
DIN 7981 ST4.8x19-C-H
15
10
50
58
10
tapping screw
15
shim
15 5 6 16 6 10 109 21
28 10 130
mullion E85104
E85CP5.06
Note:
1. in case of 2nd level drainage, it is obligatory to use 150 mm butyl seal tape in both directions of the cross zone. see detail E85M8.29
2. in case of roof constructions, conservatories, facades with inclinations and polygonal facades with 2nd level drainage, it is obligatory to use butyl seal tape
in both directions.
scale 3/4
56.3
50
50
10
5
15
flange ET076664.00
fixing part ET071113.00
transom E85354
silicone flange ET076680.00 behind
thermal insulation spacer ET080172.00/ ET080518.00
shim
15 5 28 4 95 41
6 16 6 10 130
mullion E85104
E85CP5.07
Note:
in case of 3rd level drainage, it is obligatory to use butyl seal tape in both directions.
scale 3/4
6 5
6
28
16
6
10
10
gasket ET130470.00
thermal insulation spacer ET080174.00/ ET080518.00
EPDM flange ET076651.00
flange ET076674.00
silicone
5 5
tapping screw
178.8
18 20 18
6 transom E85304
mullion E85104
41
50
E85CP5.08
Note:
It is recommended to be used pressure plate E85753 with cover cap E85751 only on vertical part or only on horizontal part of the facade.
scale 3/4
gasket ET130500.00
cover cap E85751
pressure plate E85753
butyl seal ET133553.00 (optional)
tapping screw
DIN 7981 ST5.5x38-C-H
gasket ET130470.00
flange ET076674.00
min6
15
10
56.3
50
50
10
5
15
shim
6 16 6 10 89 41
28 10 130
mullion E85104
E85CP5.09
Note:
It is recommended to be used pressure plate E85753 with cover cap E85751 only on vertical part or only on horizontal part of the facade.
scale 3/4
tapping screw
gasket ET130721.00 DIN 7981 ST5.5x65-C-H
gasket ET130457.00
50 cover cap E85713
glass support E85806
supplementary anotized profile E70650 1 15 10 10 15 1 pressure plate E85700
structural seal 6 mm butyl seal ET133553.00 (optional)
gasket ET130731.00 gasket ET130500.00
norton tape 6x6.4 mm
5
20
15
15
25
34
5
8
8
14
14
46
48
4
4
min 6
14
16
6
6
10
12
6
6
gasket ET130470.00
thermal insulation
sash E85261 spacer ET080519.00
spacer ET071011.00
gasket ET130730.00 gasket ET130480.00
friction arm
213
208
56
striker 255603
gasket ET130180.00
10 15 3 fixing part
frame E85460 ET071113.00
130
2
20 8 38.5 10 18
36
gasket ET130413.00
transom E85354
41
40
76
mullion E85104
E85CP5.10
50
Note:
For parallel opening the sash is the same, only the hardware is different.
scale 3/4
gasket ET130731.00
spacer ET071011.00
20
structural seal 6 mm gasket ET130730.00
glass support E85806 operating rod E2308
8
gasket ET130721.00 striker 255602
34
gasket ET130180.00
striker 255603
frame E85460
38.5
gasket ET130413.00
silicone
2
14
6 silicone
11
shim
56.3
50
50
12.8
5
12.2
flange ET076664.00
8 14 4 14 6 6 95 41
E85CP5.11
5 15 5 46 12 130
Note:
For parallel opening the sash is the same, only the hardware is different.
scale 3/4
25
norton tape 6x6.4 mm
6
6
butyl seal ET133553.00
6
(optional)
28
28
16
16
31
16
6
6
6
10
7
gasket ET130176.00
sash E85250 gasket ET130470.00
16
spacer ET071011.00
gasket ET130461.00
friction arm
15
57
ET990858.00/ET991913.00
silicone
operating rod E2308 mullion E85104
15
striker 255602
89
striker 255603 DIN 7981 4.8x19-C-H
70
gasket ET130180.00
frame E85410
2
40
20 8 38.5 15 10 10 15 3
36
gasket ET130413.00 18 20 18
transom E85304 flange ET076674.00
77
50
E85CP5.12
Note:
sash E85250 for projected window with insert E70650 can be raplaced with sash E85210
scale 3/4
28
5 6 16 6 6 57 77
20
operating rod E2308
supplementary anotized profile E70650 self-drilling screw
DIN 7981 ST4.8x32-M-Z
8
ISO 7049 3,5x16
gasket ET130180.00
shim
33
striker 255602
silicone
striker 255603
38.5
frame E85410
9
gasket ET130413.00
external glass transom E85304
14.4
support E85806
2
gasket ET130706.00
45.8
31 7
cover cap E85712
pressure plate E85700 DIN 7981 4.8x19-C-H
5 15 5 6 16 6 10 89 41
20 5 28 10 130
E85CP5.13
scale 3/4
28
20 5 6 16 6 6 57 77
gasket ET130176.00
sash E85250
PVC shim
gasket ET130461.00
norton tape 6x6.4 mm
operating rod E2308
20
structural seal 6 mm
silicone
supplementary anodized profile E70650 self-drilling screw
8 DIN 7981 ST4.8x32-M-Z
ISO 7049 3,5x16
gasket ET130180.00
33
shim
striker 255602
silicone
striker 255603
38.5
frame E85410
9
gasket ET130413.00
transom E85354
14.4
E85806 external
glass support
45.8
gasket ET130706.00 53 36
50
5 15 5 6 16 6 10 89 41
E85CP5.14
scale 3/4
gasket ET130706.00 50
gasket ET130457.00 9 14.4 14.2 10.8 10 15 1
cover cap E85713
glass support E85806 33 45.8
pressure plate E85700
silicone
structural seal 6 mm gasket ET130500.00
25
norton tape 6x6.4 mm
6
6
butyl seal ET133533.00 (optional)
6
28
28
16
16
31
16
6
6
6
10
7
gasket ET130176.00
sash E85251 gasket ET130470.00
16
23.5
gasket ET130461.00
thermal insulation spacer
friction arm
15
57
ET080172.00/ ET080518.00
GU255613.00-l/GU255610.00-R
operating rod E2308
15
gasket ET130180.00
frame E85410 2
40
20 8 38.5 15 10 10 15 3
36
gasket ET130413.00 18 20 18
transom E85304
3
77
mullion E85104
41
50
E85CP5.15
scale 3/4
28
5 6 16 6 6 57 77
gasket ET130176.00/P6
gasket ET130461.00
PVC shim sash E85251
norton tape 6x6.4 mm operating rod E2308
20
structural seal 6 mm silicone
supplementary anotized profile E70650 gasket ET130180.00
self-drilling screw
8 DIN 7981 ST4.8x32-M-Z
shim
33
friction arm
gasket ET130457.00 GU255613.00-l/GU255610.00-R
38.5
gasket ET130413.00
transom E85304
14.4
2
45.8
scale 3/4
28
20 5 6 16 6 6 57 77
gasket ET130176.00
sash E85251
gasket ET130461.00
PVC shim
20
operating rod E2308
norton tape 6x6.4 mm silicone
structural seal 6 mm self drilling screw
DIN 7981 ST4.8x32-M-Z
8
supplementary anotized profile E70650
gasket ET130180.00
33
shim
friction arm
gasket ET130706.00 38.5 GU255613.00-l/GU255610.00-R
frame E85410
gasket ET130413.00
9
transom E85304
14.4
2
45.8
36
50
Note:
sash E85251 for projected window with insert E70650 can be raplaced with sash E85211
scale 3/4
projected window
tapping screw
DIN 7981 ST5.5x45-C-H cover cap E85713
thermal insulation spacer ET080172.00/ ET080518.00 50
thermal insulation spacer 1 25 10 15 1
ET080177.00 pressure plate E85700
structural seal 6 mm butyl seal ET133553.00 (optional)
norton tape 6x6.4 mm
25
37.3 10
gasket ET130500.00
20
6
26
14
28
16
4
6
6
4
gasket
10
ET130175.00
gasket ET130470.00
profile E8902
39.9
silicone
spacer E85640
sash E85200 flange ET076674.00
14.3 51
gasket ET130180.00 2
65.3
46.9
frame E85400
3 15 10 10 15 3
gasket ET130458.00
18 20 18
self drilling crew
DIN 7981 ST4.5x45-M-Z
transom E85304
mullion E85104
gasket ET130409.00
41
E85CP5.18
scale 3/4
gasket ET130175.00
gasket ET130180.00
6 14 6 sash E85200
25 26 4 40 10.3 87.9
striker 255602
structural seal 6 mm silicone
self-drilling screw
4
51
striker 255603
frame E85400
gasket ET130409.00
10
shim 4mm
spacer E85640
50
scale 3/4
gasket ET130175.00
gasket ET130180.00
6 14 6 sash E85200
25 26 4 40 10.3 87.9
striker 255602
structural seal 6 mm silicone
self-drilling screw
4
51
striker 255603
frame E85400
gasket ET130409.00
10
shim 4mm
50
scale 3/4
silicone
5
self-drilling screw
gasket DIN 7981 ST4.8x55-Z
ET130413.00
2
glazing bead gasket gasket
E60242 ET130757.00 ET130758.00
transom E85304
mullion E85104
21 54 31
E85CP5.21
scale 3/4
84.5
5 3 28 7 41.5
gasket
ET130177.00 glazing bead
ET130207.00 E60242
gasket
ET130402.00
21
43
self-drilling screw
54
gasket
DIN 7981 ST4.8x55-Z
ET130430.00
gasket ET130758.00
31
38.5 gasket ET130413.00
2
adapter profile E75601
mullion E85104
15 5 28 10
E85CP5.22
scale 3/4
84.5
5 3 28 7 41.5
gasket
ET130177.00 glazing bead
ET130207.00 E60242
gasket
ET130402.00
21
43
54
gasket self-drilling screw
ET130430.00 DIN 7981 ST4.8x55-Z
gasket ET130758.00
31
gasket ET130413.00
2
2
scale 3/4
93.5 5 49.5
gasket ET130402.00 adapter for facade
E75601
gasket ET130157.00
gasket
ET130500.00
3 5
butil seal
28
ET080525.00 ET133551.00
36
ET080526.00 (optional)
75
6
gasket
ET130470.00
25
silicone
gasket ET130413.00
gasket glazing bead sash-outward frame-outward DIN 7504N 4.2x22 DIN 7981 4.8x19-C-H
ET130176.00 E60225 E75211 E75111
21 49.5 5 71.5 6 3
147
flange ET076674.00
scale 3/4
tapping screw
DIN 7981 ST5.5x45-C-H
thermal insulation spacer ET080172.00/ ET080518.00
transom E85304
15
10
50
gasket ET130470.00
fixing part
gasket ET130413.00
25
ET071113.00
6 3
12.1 28 10 67.4 40.7
adapter for facade flange ET076674.00
E75601
DIN 7504N 4.2x22 mullion E85104
ET080525.00
49.5
71.5
5
frame-outward E75111
147
gasket ET130157.00
5
ET080526.00
49.5
93.5
21
5 3 36 6 25
75
scale 3/4
tapping screw
DIN 7981 ST5.5x45-C-H
thermal insulation spacer ET080172.00/ ET080518.00
transom E85304
15
10
50
6.7
gasket ET130474.00
gasket ET130413.00 fixing part
18.3
ET071113.00
3
6
67.4 41
adapter for facade flange ET076664.00
E75601
DIN 7504N 4.2x22 mullion E85104
ET080525.00
49.5
71.5
5
frame-outward E75111
147
gasket ET130157.00
5
ET080526.00
49.5
93.5
21
5 3 36 6 25
75
scale 3/4
split mullion
50 tapping screw
1 1 DIN 7981 ST5.5x45-C-H
15 10 10 15
cover cap E85713
pressure plate E85700
5
gasket ET130500.00
25
15
6 5
28
16
6
10
10
gasket ET130470.00
15 10 10 15 thermal insulation spacer
silicone 1 1
ET080172.00/ ET080518.00
16 20 16 gasket ET076651.00
173
flange ET076674.00
tapping screw
DIN 7981 ST4.8x19-C-H
gasket ET130198.00
89
gasket ET130199.00
11.5 32 6.5
110
bracket ET071102.00
transom E85304
21
self-drilling screw
DIN 7981 ST3.5x18-M-Z
supplementary profile E 85151
gasket ET130199.00
mullion E85153
22.5 5 22.5
50
E85CP5.27
Note: 64
1. Profile E85150 to be sealed to one of mullion E85153
2. Min/ max permissible movement ±4mm.
3. For bracket ET071102.00 to be used set ET071214.00 for fixed support and set ET071215.00 for movable support.
scale 3/4
tapping screw
DIN ISO 7049 ST5.5x50*-C-H
50
cover cap E85712
pressure plate E85700
gasket ET130500.00
20
backer rod
31
9
Note:
1. Horizontal EPDM GASKET FOR TRANSOM pass above vertical EPDM GASKET FOR MULLION.
2. This technical solution could be used for vertical facade.
scale 3/4
17 31 9 6
50
transom E85354
backer rod
gasket ET130500.00
pressure plate E85700
cover cap E85711
transom E85354
E85CP5.29
Note:
1. Horizontal EPDM GASKET FOR TRANSOM pass above vertical EPDM GASKET FOR MULLION.
2. This technical solution could be used for vertical facade.
scale 3/4
50 tapping screw
DIN 7981 ST5.5x45-C-H
1 15 10 10 15 1
cover cap E85713
pressure plate E85700
5
25
15
gasket ET130500.00
5
28
16
6
10
gasket ET130470.00
thermal insulation spacer
128
29
mullion E85120
cap E19641
7.5
Note:
Steel fin to be welded with pattern
scale 3/4
outer corner 90 °
etalbond
hard insulation 20 mm 90º
backer rod
6
seal 4 mm
self drilling screw
DIN 7981 ST3.5x18-M-Z
aluminium sheet 2 mm
1
4.33
25
hard insulation 20 mm
soft insulation 31.5 mm
75
1
silicone 4.33
31.5 4 20 4 25
ET080177.00
mullion E85130
blind rivet
15
DIN 7337 A4.8x8-A
thermal insulation spacer
ET080177.00
10
50
tapping screw
10
DIN 7981 ST4.8x19-C-H
15
1
flange
ET076674.00
EPDM flange ET076651.00
gasket ET130457.00
transom E85304
1 90 7 6 16 6 20 5
28 20
E85CP5.31
Note:
1. shim ET080177.00 to be welded in the corners of the frame.
2. The edge of the panel to be scaled with weather stripe.
scale 3/4
outer corner 90 °
90º
97 8 6
101
seal 10 mm
backer rod
silicone coating
norton tape 9.5x9.5 mm
soft insulation 40 mm
etalbond
4 9.5
min 6
min 6
40.5
103
111
silicone
mullion E85130
tapping screw
DIN 7050 ST4.8x19-C-H
tapping screw
DIN 7981 ST4.8x19-C-H
flange ET076674.00
EPDM flange ET076651.00
gasket ET130457.00
transom E85304
1
90 8 6 16 6 7 15
28 7 15
E85CP5.32
Note:
It is necessary to calculate measures for each project.
scale 3/4
outer corner 90 °
90º
etalbond
hard insulation
thermal insulation spacer ET080174.00 50
15 10 25 20.4 25
suppl. mullion profile E85143
gasket ET130457.00
spacer E85655 35.4
25
20.4
35.4
25
tapping screw
DIN 7981 ST5.5x45-C-H
50
10
15
tapping screw
DIN 7981 ST4.8x19-C-H
transom E85354
28
89 7 6 16 6
E85CP5.33
scale 3/4
outer corner 90 °
etalbond
90º
hard insulation 20 mm
backer rod
6
seal 4 mm
self drilling screw
DIN 7981 ST3.5x18-M-Z
1
4.36
aluminium sheet 2 mm
50 165
tapping screw
1 15 10 15 10 DIN 7981 ST5.5x38-C-H
butyl seal ET133553.00 (optional)
thermal insulation spacer ET080174.00
thermal insulation spacer ET080177.00
5
hard insulation 20
15
etalbond
6 5
28
16
7 6
10 152 4 20 4
tapping screw whetherseal tape 28
DIN 7981 ST4.8x19-C-H
gasket ET130457.00
hard insulation 40 mm
89
165
1
self-drilling screw 4.36
DIN 7981 ST4.8x19-M-Z
240
L-profile section 4065
blind rivet
DIN 7337 A4.8x8-A
41
10
15
50
50
10
15
1
Note:
shim ET080177.00 to be welded in the corners of the frame.
scale 1/2
outer corner 90 °
90º
max 500
seal 10 mm
15
5
6 5
structural seal 7 mm
min 6
23
28
16
10 28
angle 30x30x1.5- 4191
square tube 40x40x2-7007
gasket ET130457.00
89
mullion E85104
DIN 7981 4.8x19-C-H
130
max 500
transom E85304
41
E85CP5.35
Note:
The glass thickness should be checked by facade engineer.
scale 1/2
inner corner 90 °
90°
gasket ET130500.00
pressure plate E85700
cover cap E85713
whetherseal tape
tapping screw
DIN 7981 ST5.5x38-C-H
thermal insulation spacer
ET080174.00
50
gasket ET130457.00 min 5
3
gasket ET130457.00
5
blind rivet
30
min 5
25
15
30
DIN 7337 A4.8x8-A
73
6 5
58
hard insulation 20 mm
28
16
etalbond
7 6
7
73
154
151
58
190
welded seam 3 mm
89
silicone
flange ET076674.00
mullion E85104
130
130
transom E85304
3
50 151
154
41
E85CP5.36
Note:
The sequence of mounting is as follows: first mullion, welded transom and secon mullion.
scale 1/2
inner corner 90 °
90°
gasket ET130500.00
cover cap E85731 flange ET076674.00
pressure plate E85740
tapping screw
DIN 7981 ST4.8x19-C-H
6
28
16
6
15
7
39.5
suppl. mullion profile E85142
24.5
tapping screw
DIN 7981 ST5.5x45-C-H
tapping screw
silicone DIN 7981 ST5.5x16-C-H
64.5
E85CP5.37
scale 3/4
seal 4 mm
self drilling screw
DIN 7981 ST3.5x18-M-Z
aluminium sheet 2 mm
1
32 4.41
blind rivet DIN 7337 A4.8x8-A
1
gasket ET130457.00 4.41
28
16
24
32
50
6
32
4
aluminium sheet 2 mm
supplementary profile E85150
gasket ET130199.00
membrane 1 mm
mullion E85153
silicone
gasket ET130198.00
45°
-150
°
E85CP5.38
scale 3/4
tapping screw
DIN 7981 ST5.5x38-C-H
cover cap E85732
pressure plate E 85741
gasket ET130500.00
21.6
26.6
6 5
28
16
6
7
7
silicone gasket ET130457.00
flange ET076674.00
5 thermal insulation spacer
ET080174.00/ ET080518.00
tapping screw
DIN 7981 ST4.8x19-C-H
89
90
mullion E85135
135°
1
transom E85304
E85CP5.39
scale 3/4
L-profile section 4134
etalbond
soft insulation
tapping screw
DIN 7050 ST4.8x19-C-H
30°-90°
cover cap E85713
tapping screw
DIN 7981 ST5.5x38-C-H
pressure plate E85700
transom E85300
silicone
split rotating mullion E85141
suppl. mullion E85140
tapping screw
90
DIN 7051 ST5.5x32
mullion E85102
E85CP5.40
scale 3/4
tapping screw
DIN 7981 ST5.5x55-C-H
cover cap E85711
pressure plate E85703
0°-15°
gasket ET130500.00
12
17
5 6
16
28
6 4
4
5 10 5 gasket ET130474.00
spacer E 85650
tapping screw
outer angles 7.5 °~22.5° DIN 7981 ST5.5x55-C-H
cover cap E85711
pressure plate E85704
7.5°-22.5° gasket ET130500.00
12
17
5 6
16
28
6 4
4
5 10 5
gasket ET130474.00
spacer E85651
thermal insulation spacer
ET080172.00/ ET080518.00
E85CP5.41
tapping screw
DIN 7981 ST4.8x19-C-H
scale 3/4
tapping screw
DIN 7981 ST5.5x60-C-H
cover cap E85711
pressure plate E85705
15°-30°
gasket ET130500.00
thermal insulation spacer
ET080172.00/ ET080518.00
gasket ET130474.00
12
spacer E85652
17
5
6
16
28
6 4
5 10 5
4
tapping screw
DIN 7981 ST4.8x19-C-H
tapping screw
outer angles 22.5 °~37.5° DIN 7981 ST5.5x60-C-H
cover cap E85711
gasket ET130500.00
-37.5
gasket ET130474.00
12
spacer E85653
17
5
6
16
28
6
4
4
5 10 5
E85CP5.42
tapping screw
DIN 7981 ST4.8x19-C-H
scale 3/4
tapping screw
DIN 7981 ST5.5x60-C-H
cover cap E85711
pressure plate E85707
gasket ET130500.00
30°-
ET080518.00
gasket ET130474.00
spacer E85654
tapping screw
12
DIN 7981 ST4.8x19-C-H
17
5
6
16
28
6
4
5 10 5
4
tapping screw
outer angles 37.5 °~52.5° DIN 7981 ST5.5x60-C-H
cover cap E85711
pressure plate E85708
37.5
gasket ET130500.00
gasket ET130474.00
spacer E85655
tapping screw
DIN 7981 ST4.8x19-C-H
12
5
17
6
16
28
6
4
5 10 5
4
E85CP5.43
scale 3/4
roof connector
tapping screw
DIN 7981 ST5.5x68-C-H
cover cap E85711
spacer E85653
19
5
6
0.3
14
5
28.
3
4
44
4
silicone
transom E85305
mullion connector E85960 below
mullion E85104
set ET071219.00 E85CP5.44
Note:
Apply silicone into the spacer before mounting.
scale 3/4
50 255 50
tapping screw 1
1 15 10 10 15 1 DIN 7981 ST5.5x45-C-H 1 15 10 10 15
cover cap E85713
pressure plate E85700
butyl seal ET133553.00 (optional)
gasket ET130500.00
15
6 5
28
16
10 6
10
thermal insulation
gasket ET130470.00
spacer ET080172.00/ transom E85305
ET080518.00 silicone
EPDM flange ET076651.00 mullion E85104
43
E85CP5.45
scale 1/2
scale 1/2
pressure plate E85700 thermal insulation spacer
curtain
ET080165.00
5
butyl seal ET133553.00 (optional)
sheet aluminium 2 mm
15
25
gasket ET130500.00
16
thermal insulation
28
26
spacer
ET080172.00/ membrane 2 mm
10
6 10
10
gasket ET130470.00
transom E85305
gasket ET076674.00
delatation / partition wall detail
silicone
system
flange ET076674.00
89
130
130
208
172
41
bracket
40
40
E85
E85
E85CP5.46
curtainwall
curtain wallsystem
system E85
E85
concrete wall
hard insulation 50 mm
plaster
suppl. profile E85610 cover cap E85711
gasket ET130500.00
15
20
6 5
17
28
16
6
10
10
gasket ET130470.00
gasket ET130997.00
tapping screw
DIN 7981 ST4.8x19-C-H
silicone
flange ET076674.00
89
mullion E85104
LP angle 4045 (15x15x2)
additional profile E85620 130
41
E85CP5.47
scale 3/4
28
vapour barrier
membrane 1 mm
gasket ET130470.00
tapping screw
bravo system by ETEM DIN 7981 ST4.8x19-C-H
flange ET076674.00
mullion E85104
206
177
scale 3/4
25
1.5
5
1
28
26
blind rivet DIN 7337 A4.8x8-A
10
10
49
hard insulation
gasket
ET130470.00
membrane tapping screw
90
DIN 7981 ST4.8x19-C-H
soft insulation mullion E85102
41
scale 3/4
135°
cover cap E85730
thermal insulation spacer
ET080174.00/ ET080518.00
tapping screw
20
DIN 7981 ST5.5x38-C-H
5
pressure plate E85701
6
14
butyl seal ET133553.00
8.4
etalbond 7
hard insulation 17 mm
membrane 1 mm
29
gasket ET130457.00
glazing shim ET071184.00
110
transom E85320
gasket ET130199.00
cover cap E85712
EPDM flange ET076651.00
32
tapping screw
32
DIN 7981 ST5.5x38-C-H
thermal insulation spacer ET080174.00
accessory ET074674.00
gasket ET130457.00
machine cutting
for transom slot
E85CP5.50
Note:
Two EPDM flanges ET076651.00 to be cut in specific length and to be glued to each other.
scale 3/4
90°-150°
20
cover cap E85730
28
6
thermal insulation spacer
.4
ET080174.00/ ET0800518.00
14
tapping screw
8.4
DIN 7981 ST5.5x38-C-H
3
pressure plate E85701
butyl seal ET133553.00
55
etalbond
hard insulation 30 mm gasket ET130473.00
membrane 1 mm transom E85370
suppl. profile E85670
20
90°
30°-
tapping screw
DIN 7981 ST5.5x38-C-H
accessory ET074674.00
E85CP5.51
5 28 10
scale 3/4
90°-150°
pressure plate E85701
cover cap E85730
5 6
28.4
14
2
113.
8.4
7
thermal insulation spacer ET080174.00
20
gasket ET130457.00
54
DIN 7981 ST5.5x38-C-H
1
4
mullion is trimmed
etalbond
hard insulation 26 mm
113.2
EPDM flange
ET076651.00
cover cap E85712
presure plate E85700
tapping screw
DIN 7981 ST5.5x38-C-H
thermal insulation spacer ET080174.00
gasket ET130457.00
20 5 6 16 6 7 89 41
25 28 7 130
E85CP5.52
scale 1/2
115°
20
cover cap E85730
5 6
131
14
117.2
8.4
7
13.9
seal 10 mm
89
10
14.4
10
41
96.8
82.4
20 5 6 16 6 7 89 41
°
115
EPDM flange
15
tapping screw
DIN 7981 ST5.5x38-C-H
15
thermal insulation spacer ET080174.00
gasket ET130457.00
20 5 6 16 6 7 89 41
25 28 7 130
E85CP5.53
scale 1/2
115°
20
tapping screw
5
DIN 7981 ST4.2x32-C-H
6
14
8.4
soft insulation 40 mm
8
norton tape 9.5x9.5 mm 151.
7.7
33
10
89
seal 10 mm membrane
ceramic coating
al. sheet
foam plastic
96.4
transom E85304
°
115
gasket ET130458.00
flange ET076674.00
20 5 6 16 6 8 89 41
E85CP5.54
Note:
The glass thickness should be checked by the facade engineer.
scale 3/4
slope >25°
tapping screw
DIN 7981 ST5.5x45-C-H
butyl seal ET133553.00
cover cap E85730
pressure plate E85701
gasket ET130500.00
8
12
>25°
20
5
6
14
0.35
28.3
4 4
5
mullion E85104
gasket ET130470.00
thermal insulation spacer ET080172.00/ ET080518.00
glazing shim ET071184.00
transom E85304
flange ET076674.00
89
E85CP5.55
scale 3/4
slope >7°
2
5 6
1.2
14
28.35
0.35
4 4
8°
10
gasket ET130470.00
thermal insulation spacer ET080171.00
glazing shim ET071184.00
transom E85304
89
mullion E85104
EPDM flange ET076651.00
flange ET076674.00
E85CP5.56
scale 3/4
tapping screw
DIN 7981 ST5.5x45-C-H
silicone
50
al. flat bar 9070 50x2mm
bytil seal ET130551.00
backer rod
8
31
9
6
1
silicone
EPDM membrane
transom E85350
EPDM gasket (for mullion) ET130801.00
steel construction
100
DIN 7504 ST4.2x22-M-Z
(Bimetal, Ruspert drilling screw A2
with a case- hardened drilling tip,
hardened)
60
E85CP5.56_1
Note:
Horizontal EPDM GASKET FOR TRANSOM pass above vertical EPDM GASKET FOR MULLION.
scale 3/4
tapping screw
DIN 7981 ST4.8x19-C-H
shim
glazing support ET071203.00
31
9
6
1
60
100
E85CP5.56_2
Note:
1. Horizontal EPDM GASKET FOR TRANSOM pass above vertical EPDM GASKET FOR MULLION.
2. This technical solution could be used for vertical facade.
scale 3/4
tapping screw
DIN ISO 7049 ST5.5x50*-C-H
cover cap E85711
pressure plate E85700 50
gasket ET130500.00
butyl seal ET133553.00
backer rod
17
30
9
6
1
silicone
EPDM membrane
transom E85350
EPDM gasket (for mullion) ET130801.00
100
DIN 7504 ST4.2x22-M-Z
(Bimetal, Ruspert drilling screw A2
with a case- hardened drilling tip,
hardened)
60
E85CP5.56_3
Note:
Horizontal EPDM GASKET FOR TRANSOM pass above vertical EPDM GASKET FOR MULLION.
scale 3/4
tapping screw
DIN 7981 ST4.8x19-C-H
PVC spacer
glazing support ET071203.00
30
9
6
1
60
100
E85CP5.56_4
Note:
1. Horizontal EPDM GASKET FOR TRANSOM pass above vertical EPDM GASKET FOR MULLION.
2. This technical solution could be used for vertical facade.
scale 3/4
1.5 1
aluminium sheet 1.5 mm 61.5
seal 5 mm
blind rivet
4.5
DIN 7337 A4.8x8-A
5
ET080177.00
membrane 1 mm
46.5
36.5
28.5
hard insulation 20 mm
membrane 1 mm
cover cap E85730
pressure plate E85701
2.5
12
2
5
20
25
2.5
8
89
bracket E85913
gasket ET130457.00 reinforced concrete
EPDM flange ET076651.00
flange ET076674.00
41
40
E85CP5.57
scale 1/2
bottom finishing
water drainage
tapping screw
DIN 7981 ST5.5x45-C-H
cover cap E85712
pressure plate E85700
gasket ET130500.00
thermal insulation spacer ET080177.00
additional profile E85612 24 38
bracket
membrane ET130030.00
hard insulation
30
plaster
hard insulation 50 mm
E85CP5.58
scale 3/4
bottom finishing
20 5 28 10 109 21
water drainage
gasket ET130470.00
gasket ET130500.00 vapor barrier
membrane
aluninium sheet
thermal insulation spacer
ET080165.00
tile
hard insulation
additional profile E85612
cut for membrane in mullion
membrane ET130030.00
aluninium sheet
ground tiles
E85CP5.59
scale 1/2
water drainage
28
20 5 6 16 6 10
mullion E85104
transom E85306
gasket ET130470.00
glazing shim ET071184.00
tapping screw
DIN 7981 ST5.5x45-C-H 4 24
thermal insulation spacer
ET080172.00/ ET080518.00
membrane ET130030.00
concrete slab
hard insulation 60 mm
aluminum tube
perforation 60x30x2
self-drilling screw
E85CP5.60
DIN 7981 ST5.5x19-M-Z
E12930 vivo system by ETEM
scale 1/2
self-drilling screw
DIN 7981 ST4.8x19-M-Z
30
90
60
etalbond membrane ET130030.00
additional profile E85612
membrane
thermal insulation spacer ET080177.00
hard insulation 32 mm
24 10 33 76
4
50
bracket
transom E85305
5 6 16 6 10 mullion E85104
28 10 gasket ET130470.00
scale 3/4
25 28 7 130
20 5 6 16 6 7 89 41
gasket ET130457.00
thermal insulation spacer ET080174.00
glazing shim ET071184.00
15
tapping screw
DIN 7981 ST5.5x45-C-H
10
50
blind rivet
10
mullion E85104
mullion connector E85960 below
15
10
50
10
15
E85CP5.62
scale 1/2
41
13 0
89
41
7
7
6
28
89
5
16
6
25
7
6
15
16
10
50 10
6
5
15
20
86.
6
86.
6
86.6
20 5 6 16 6 7 89
glazing shim ET071184.00
15
thermal insulation spacer ET080174.00
gasket ET130457.00
E85CP5.63
20 5 6 16 6 7 89 41
25 28 7 130
scale 1/2
10
min 6
1
4.23
hydrophobic plywood 1
2% 4.23
ENF
membrane
metal aluminum sheet
soft insulation
gypsum board
5 28 10 min 30
6 16 6
bracket
scale 1/4
scale 1/2
tapping screw
DIN 7050 ST4.8x19-C-H
curtain wall system
3M tape
thermal insulation spacer
glass spandrel panel in brustung zone
ET080177.00
transom E 85380
perforation
sheet steel 2 mm
soft insulation
195
bracket
anchor M12x123
0.38
25 ≥20mm
4 4
mullion E85104
transom E85305
water drainage
glazing shim ET071184.00
butyl seal ET133553.00
(optional)
tapping screw
DIN 7981 ST5.5x45-C-H
gasket ET130500.00
20 5 6 16 6 10
v
v-ventilation
d-drainage
Ventilation
and drainage
scheme of
the panel.
d
E85CP5.65
E85
E85
scale 1/2
gasket ET130500.00
curtain wall system
(optional)
50
tapping screw
DIN 7981 ST5.5x45-C-H
15
aluminum sheet 1 mm
membrane
196
soft insulation
adaptor
mullion E85104
transom E85305
vapor membrane
15
tapping screw
DIN 7981 ST5.5x45-C-H
gasket ET130500.00
E85CP5.66
E85
E85
scale 1/2
transom E85305
curtain wall system
gasket ET130470.00
glazing shim ET071184.00
etalbond spandrel panel in brustung zone
gasket ET130500.00
membrane
butyl seal ET133553.00
(optional) gasket ET130480.00
min 5
tapping screw
DIN 7981 ST5.5x45-C-H
thermal insulation spacer
ET080172.00/ ET080518.00
thermal insulation spacer 2 2
ET080177.00 4 20 123
2
151
aluminium sheet 2 mm
etalbond
steel sheet 2 mm
soft insulation
130
bracket
197
anchor M12x123
steel sheet 2 mm
mullion E85104
transom E85305
thermal insulation spacer
ET080177.00
gasket ET130500.00
gasket ET130480.00
tapping screw
DIN 7981 ST5.5x45-C-H
thermal insulation spacer
ET080172.00/ ET080518.00
gasket ET130470.00
E85CP5.67
E85
E85
scale 1/2
hard insulation
membrane
perforated metal aluminum sheet
thermal insulation spacer
ET080165.00 metal aluminum sheet
20
thermal insulation spacer
ET080174.00
pressure plate E85700
50
cover cap E85720 transom E85304
bracket
gasket ET130470.00
25 5 28 10 89
gasket ET130470.00
50
198
glazing shim
ET071184.00
transom E85300
25 5 28 10 15
glazing shim
thermal insulation spacer ET071184.00
ET080174.00
pressure plate E85700 gasket ET130470.00 transom E85304
50
bracket
membrane
bracket E85967
membrane ET130030.00
E85CP5.68
E85
E85
STRUCTURAL
GLAZING
SECTIONS / DETAILS
curtain
curtainwall
wallsystem
system E85
E85
53.5
6
6
12
12
4
4
44
44
16
16
6
6
10
12
6
6
gasket ET130470.00
sash E85261
spacer ET071011.00
gasket ET130730.00 gasket ET130480.00
friction arm
56
2
20 8 38.5 10 18
36
gasket ET130413.00
transom E85354
41
40
76
mullion E85104
E85SG6.001
50
Note:
For parallel opening the sash is the same, only the hardware is different.
scale 3/4
gasket ET130731.00
spacer ET071011.00
20
structural seal 6 mm gasket ET130730.00
operating rod E2308
8
striker 255602
glass support E85614 gasket ET130180.00
53.5
silicone seal
tapping screw
DIN ISO 7049 ST5.5x25-C-H
3
Up to 3 additional
glazing shim ET994471.00
backer rod flange ET076664.00
fixing part ET071113.00
glazing shim ET071191.00
transom E85354
silicone flange ET076680.00 behind
gasket ET130463.00
glazing shim ET071200.00
glazing clip
spacer E85924TR tape
mullion E85104
6 12 4 16 6 6 95 41
E85SG6.002
44 12 130
Note:
For parallel opening the sash is the same, only the hardware is different.
* When use glazing shim for heavy glass panels, keep the distance between the glazing shim and top of glazing minimum 4mm!
scale 3/4
silicone seal
silicone gasket ET130705.00
tapping screw
DIN 7982 ST5.5x25-C-H
15 20 15
10 10 glazing clip ET071116.00
spacer E85991
6
32
20
6
6
gasket ET130463.00
15
gasket ET076651.00
flange ET076674.00
5 5
silicone
89
tapping screw
DIN 7981 ST4.8x19-C-H
3
15 10 10 15
130
18 20 18
fixing part ET071113.00
transom E85304
6
mullion E85104
41
50
E85SG6.0
scale 3/4
spacer E85991
glazing clip ET071116.00
gasket ET130463.00
flange ET076674.00 mullion E85104
glazing shim ET071184.00
15
10
56.3
20
50
10
tapping screw
5
DIN 7982 ST5.5x25-C-H
15
fixing part ET071113.00
transom E85304
gasket ET076651.00 behind
6 20 6 6.4 89 41
32 6.4 130
E85SG6.01
note:
spacer E85991 has to be used only with 2nd level transom
scale 3/4
silicone seal
silicone gasket ET130705.00
thermal insulation spaser
ET080171.00/ET080164.02
tapping screw
15 20 15 DIN 7982 ST5.5x25-C-H
10 10 glazing clip ET071130.00
spacer E85924TR
min 6
3M tape
6
min6
28
16
6
6
12
gasket ET130480.00
flange ET076664.00
5 5
89
3 3
15 10 10 15
130
18 20 18
fixing part ET071113.00
transom E85354
mullion E85104
41
50
E85SG6.02
scale 3/4
silicone seal
silicone gasket ET130705.00
thermal insulation spaser
ET080171.00/ET080164.02
tapping screw
15 20 15 DIN 7982 ST5.5x25-C-H
10 10 glazing clip ET071130.00
spacer E85924TR
min 6
3M tape
6
min6
28
16
6
12
12
gasket ET130480.00
gasket ET076651.00
flange ET076674.00
5 5 silicone
tapping screw
89
DIN 7981 ST4.8x19-C-H
3 3
15 10 10 15
130
18 20 18
fixing part ET071113.00
transom E85304
6
mullion E85104
41
50
E85SG6.03
scale 3/4
spacer E85924TR
glazing clip ET071130.00
gasket ET130480.00
flange ET076674.00
glazing shim ET071184.00
15
56.3
20
50
10
tapping screw
5
DIN 7982 ST5.5x25-C-H
15
min 6
fixing part ET071113.00
transom E85304
gasket ET076651.00 behind
6 16 6 12 89 41
28 12 130
E85SG6.04
scale 3/4
spacer E85924TR
glazing clip ET071130.00
gasket ET130463.00
glazing shim ET071189.00
flange ET076664.00
15
56.3
20
50
10
tapping screw
5
DIN 7982 ST5.5x25-C-H
15
min 6
fixing part ET071113.00
transom E85354
6 16 6 12 89 41
28 12 130
E85SG6.05
scale 3/4
6
6
28
28
16
16
16
6
6
6
7
12
9.2
gasket ET130176.00
sash E85250 gasket ET130480.00
16
spacer ET071011.00
gasket ET130461.00
friction arm ET990858.00
56
15
/ET991913.00
operating rod E2308
striker GI255602.00 6
15
striker GI255603.00
gasket ET130180.00
frame E85410 2 3
20 8 38.5 14 11 10 15 40
38.2
16 21 18
transom E85304
3
77
mullion E85104
41
E85SG6.06
50
scale 3/4
28
6 16 6 7 56 38.2
gasket ET130176.00
6 6 16 sash E85250
gasket ET130461.00
PVC shim
operating rod E2308
norton tape 6x6.4 mm
20
silicone
structural seal 6 mm self-drilling screw
DIN 7981 ST4.8x32-M-Z
8
supplementary anodized profile E70650 gasket ET130180.00
gasket ET130479.00 striker GI255602.00
53.5
striker GI255603.00
glass support E85614
38.5
frame E85410
silicone
transom E85304
gasket ET130707.00 50.8 T-joint for transom
ET071124.00
3
16
14
2
7.9
9.2
1.6
20.8
50
min 6
transom E85304
gasket ET076651.00 behind
gasket ET130480.00
silicone gasket ET130705.00
silicone seal
mullion E85104
E85SG6.07
6 16 6 12 89 41
28 130
scale 3/4
6 16 6 7 56 38.2
gasket ET130176.00
6 6 16
sash E85250
PVC shim
gasket ET130461.00
norton tape 6x6.4 mm
20
operating rod E2308
structural seal 6 mm self-drilling screw
supplementary anodized profile E70650 DIN 7981 ST4.8x32-M-Z
8
gasket ET130180.00
gasket ET130473.00
striker GI255602.00
53.5
striker GI255603.00
glass support E85614
38.5
frame E85410
silicone
gasket ET130707.00 transom E85354
56.8
3
16
14
2
7.9
35.3
3
6
1.6
20.8
50
min 6
flange ET076664.00
fixing part ET071113.00
gasket ET076651.00 behind
1.1
gasket ET130463.00
silicone gasket ET130705.00
silicone seal
mullion E85104
6 16 6 6 6 89 41
E85SG6.08
28 12 130
scale 3/4
silicone seal
glass support E85614 silicone gasket ET130705.00
gasket ET130707.00
ET080171.00 / ET080164.02
gasket ET130479.00 tapping screw
35.2 DIN 7982 ST5.5x25-C-H
structural seal 6 mm
3 2 1.6 glazing clip ET071130.00
supplementary anodized profile E70650 53.6 7.9 20.8
norton tape 6x6.4 mm spacer E85924TR tape
6
6
6
28
28
16
16
16
6
6
6
7
12
gasket ET130176.00
9
gasket ET130461.00
friction arm GU255610.00 - R
56
/GU255613.00 - L
operating rod E2308 6
gasket ET130180.00
frame E85410 2 3
20 8 38.5 14 11 10 15
38.2
gasket ET130413.00
16 21 18
transom E85304
79.2
mullion E85104
41
50
E85SG6.09
scale 3/4
6 16 6 7 56 38.2
6 6 16
gasket ET130176.00
sash E85251
PVC shim
gasket ET130461.00
norton tape 6x6.4 mm
20
operating rod E2308
structural seal 6 mm self-drilling screw
supplementary anodized profile E70650 DIN 7981 ST4.8x32-M-Z
8
gasket ET130479.00 gasket ET130180.00
38.5
silicone frame E85410
gasket ET130707.00 transom E85304
3
16
14
7.9
2
35.3
9.2
6
20.8
50
glazing shim ET071182.00
5
ET080171.00 / ET080164.02
15
min 6
fixing part ET071113.00
flange ET076674.00
gasket ET076651.00 behind
gasket ET130480.00
silicone gasket ET130705.00
silicone seal
mullion E85104
6 16 6 89 41
28 12 130
E85SG6.10
scale 3/4
6 16 6 7 56 38.2
gasket ET130176.00
6 6 16
sash E85251
PVC shim
gasket ET130461.00
norton tape 6x6.4 mm
20
operating rod E2308
structural seal 6 mm self-drilling screw
DIN 7981 ST4.8x32-M-Z
8
supplementary anodized profile E70650
gasket ET130180.00
gasket ET130473.00
friction arm GU255610.00 - R
53.5
/GU255613.00 - L
glass support E85614 38.5
frame E85410
gasket ET130707.00
transom E85354
3
16
14
2
7.9
35.3
3
6
1.6
20.8
50
ET080171.00 / ET080164.02
15
min 6
flange ET076664.00
fixing part ET071113.00
gasket ET076651.00 behind
1.1
gasket ET130463.00
glazing clip ET071130.00
silicone gasket ET130705.00
silicone seal
mullion E85104
6 16 6 6 6 89 41
28 12 130
E85SG6.11
scale 3/4
min 6 mm *
gasket sash euro groove gasket thermal insulation spacer T profile spacer E85924TR
ET130402.00 E75200 ET130430.00 ET080184 E75300
6
3
14
28
28
8
ET130757.00
10
7
84.5
gasket
gasket
ET130177.00
ET130207.00 ET990608.00
41.5
gasket gasket
88
ET130758.00 ET130455.00
glazing bead gasket
3
130
E60242 ET0990619.00
21 54 31 5
111 50
E85SG6.12
scale 3/4
84.5
5 3 28 7 41.5
gasket gasket
ET130402.00 ET130177.00
ET130207.00
glazing bead
E60242
21
sash euro groove
E75200
43
drip profile
E2357
5
54
106
6
T profile
5.5
81
E75300 gasket
gasket ET130758.00
ET130457.00 31
gasket
thermal insulation spacer ET130207.00
ET080184.00
7.3
min 6 mm *
glazing shim
ET071184.00
10.3
3
20.3
50
10
5
15
6 16 6 12 89 41
* according to ETAG 002
28 12 130
scale 3/4
84.5
5 3 28 7 41.5
gasket gasket
ET130402.00 ET130177.00
ET130207.00
glazing bead
E60242
21
sash euro groove
E75200
43
drip profile
E2357
5
54
106
ET130430.00
6
T profile
5.5
81
E75300 gasket
gasket ET130758.00
ET130457.00
gasket 31
thermal insulation spacer ET130208.00
ET080177.00
7.5
glazing shim
ET071189.00
5.5
10.5
20.5
50
10
7
15
transom E85354
gasket ET130463.00
mullion E85104
E85SG6.14
6 16 6 6 6 89 41
28 12 130
scale 3/4
90°
silicone seal
silicone gasket ET130705.00
tapping screw
DIN 7981 ST5.5x25-C-H etalbond
glazing clip ET071130.00 hard insulatin
spacer E85924TR 20 41
gasket ET130480.00
41
suppl. mullion profile E85143
spacer E85655
20
tapping screw
DIN 7981 ST5.5x45-C-H
transom E85354
89 12 6 16 6
101 28
E85SG6.15
scale 3/4
outer corner 90 °
90º
etalbond
hard insulation 20 mm
baker rope
4
seal 4 mm
self-drilling screw
DIN 7981 ST3.5x18-M-Z
aluminium sheet 2 mm 1
4.93
silicone seal
silicone gasket ET130705.00
tapping screw
DIN 7982 ST5.5x25-C-H thermal insulation spacer ET080177.00
glazing clip ET071130.00 hard insulation 20 mm
spacer E85924TR tape etalbond
4
6
20
16
4
12 6
gasket ET130457.00
hard insulation 40 mm
89
self drilling screw 1
4.93
DIN 7981 ST4.8x19-M-Z
142.2
L-profile section 4065
220
blind rivet
DIN 7337 A4.8x8-A
41
50
E85SG6.16
note:
PVC spacer ET080177.00 to be welded in the corners of the frame.
scale 1/2
inner corner 90 °
90°
silicone
aluminium tube 7027
silicone seal
silicone gasket ET130705.00
50
6
28
16
12 6
25
12
etalbond
gasket ET130480.00
25 130
114
111
89
welded seam 3 mm
130
130
50 3 111
114
41
transom E85304
flange ET076674.00
mullion E85104
E85SG6.17
note:
The sequence of mounting is as follows: first mullion, welded transom and secon mullion.
scale 1/2
90°
silicone seal
backer rod
thermal insulation spacer
ET080171.00/ET080164.02
al. sheet
spacer E85924TR
15
6
28
16
6
8
15 130
14
145
suppl. mullion profile E85142
tapping screw
DIN 7981 ST5.5x19-C-H
tapping screw
DIN 7981 ST5.5x16-C-H
gasket ET130458.00
89
spacer E85640
silicone
130
41
E85SG6.18
scale 3/4
5 6
gasket ET130480.00
40
35
flange ET076661.00
3 15 10 10 15 3 transom E85351
mullion E85101
silicone seal
silicone gasket ET130705.00
polygonal facade with inner angle 5 ° thermal insulation spaser
ET080171.00/ET080164.02
20 tapping screw
DIN 7982 ST5.5x25-C-H
6
5°
glazing clip ET071130.00
28
6
6 16
41
gasket ET130480.00
35
flange ET076661.00
transom E85351
15 10 10 15
3 3 mullion E85101
E85SG6.19
note:
1. If the angle is less than 10 °, 2nd and 3rd level transoms could be used with glazing clip ET071130.00.
2. If the angle is between 10° and 20°. 3rd level transom could be used with angle spacer and glazing clip ET071130.00.
3. If the angle is greater than 20°, 2nd and 3rd level transom could be used with bended metal sheet instead of glazing slip.
scale 3/4
90°-150°
6
20
30.4
16
8.410
131
gasket ET130470.00
glazing shim ET071184.00
89
mullion is trimmed
aluminium sheet
hard insulation
41
membrane 1 mm
aluminium sheet
thermal insulation spacer
ET080165.00
gasket ET130457.00
131
20
silicone seal
silicone gasket ET130705.00
glazing clip ET071130.00 gasket ET130480.00
spacer E85924TR
6 16 6 12 89 41
28 12 130
E85SG6.20
scale 1/2
silicone seal
silicone gasket ET130705.00
thermal insulation spaser
ET080171.00/ET080164.02
flat plate
29
vapour barrier
gasket ET130480.00
tapping screw
DIN 7981 ST4.8x19-C-H
silicone
bravo system by ETEM mullion E85104
membrane 1 mm
207
178
gypsum board
flat plate
E85SG6.21
scale 3/4
etalbond
bravo system by ETEM
silicone seal
silicone gasket ET130705.00
thermal insulation spaser
ET080171.00/ET080164.02
tapping screw
DIN 7982 ST5.5x25-C-H
glazing clip ET071130.00
122 20 spacer E85924TR
3M tape
28
16
6
EPDM strip ET130492.00
12
12
gasket ET130480.00
additional profile E85612
89
LP angle 4045 (15x15x2)
130
41
E85SG6.22
scale 3/4
bottom finishing
gasket ET130480.00
27
30
soft insulation 60 mm
membrane
L-profile section 4065
self-drilling screw
DIN 7981 ST4.8x19-M-Z
seal 6 mm
plaster
perforation
E85SG6.23
hard insulation
scale 1/2
self-drilling screw
DIN 7981 ST4.8x19-M-Z
24 60
thermal insulation 2 2
spacer ET080177.00
28 60
88
etalbond
soft insulation
bracket
washer DIN 440
steel sheet 2 mm
mullion E85104
transom E85305
thermal insulation
spacer ET080177.00 2
glazing shim
E85SG6.24
ET071184.00
flange ET076651.00
scale 1/2
self-drilling screw
DIN 7981 ST4.8x19-M-Z
membrane
30
60
etalbond
membrane additional profile E85612
hard insulation thermal insulation spacer ET080177.00
15
33 76
20
bracket
15
transom E85305
mullion E85104
gasket ET130480.00
6 16 6 12 109 21
28 12 130
170
E85SG6.25
scale 3/4
self-drilling screw
DIN 7981 ST4.8x19-M-Z
24 60
thermal insulation 2 2
spacer ET080177.00
28 60
88
etalbond
soft insulation
bracket
washer DIN 440
steel sheet 2 mm
mullion E85104
transom E85305
thermal insulation
spacer ET080177.00 2
glazing shim
E85SG6.26
ET071184.00
flange ET076651.00
scale 1/2
min 6
10
1
4.23
hydrophobic plywood 1
2% 4.23
ENF
membrane
metal aluminum sheet
170
min 30
bracket
steel sheet 2 mm
fire resistant silicone (1250°C)
mullion E85104
transom E85305
E85SG6.27
scale 1/4
20
gasket ET130500.00
25
6 5 6
32
20
6 6
6
gasket ET130463.00
thermal insulation
spacer ET080172.00
gasket ET076651.00
193
5 5
flange ET076674.00
89
tapping screw
DIN 7981 ST4.8x19-C-H
3 15 10 10 15 3 fixing part ET071113.00
130
18 20 18
transom E85304
6
mullion E85104
41
50
mullion E85104
spacer E85990
glazing clip ET071116.00
gasket ET130463.00
flange ET076674.00
glazing shim ET071184.00
15
10 10
56.3
20
50
tapping screw
5
DIN 7982 ST5.5x25-C-H
15
transom E85304
gasket ET076651.00 behind
thermal insulation spaser
ET080171.00/ET080164.02
silicone gasket ET130705.00
silicone seal
E85C7.1
6 20 6 6 89 41
32 6 130
scale 1/2
25
6
6 6
6
28
16
16
31
16
6 6
10 6
6
7
gasket ET130470.00
sash E85250
16
gasket ET130461.00
15
57
mullion E85104
15
gasket ET130180.00
frame E85410 2
40
20 8 38.5 15 10 10 15 3
36
18 20 18
transom E85304
77
3
41
50
self-drilling screw
glass support E85614 DIN 7981 ST4.8x32-M-Z
8
gasket ET130707.00
gasket ET130180.00
38.5
frame E85410
transom E85304
1
16
14
20.8 7.9
1.6 2
33.3
9
6
50
5
15
min6
note:
sash E85250 for projected window with
mullion E85104 insert E70650 can be raplaced with sash
E85210
6 16 6 12 89 41
scale 1/2
min 6
spacer E85924TR
min 6
6
28
16
12 6
12
gasket ET130480.00
89
transom E85354
mullion E85104
50
56.3
50
50
5
15
ET 130463.00
15 5 transom E85354
flange ET076664.00
fixing part ET071113.00
thermal insulation spacer ET080172.00
PVC spacer
6 16 66 89 41
E85C7.3
28 12 130
mullion E85104
scale 1/2
6 6
28
16
16
6 6
6
9.2
gasket ET130480.00
sash E85251
gasket ET130461.00
57
frame E85410 2 3
20 8 39 14 11 10 15
16 21 18
transom E85304
79.2
79
mullion E85104
50
6 16 6 6 57 79
gasket ET130176.00/P6
gasket ET130461.00
PVC shim
norton tape 6x6.4 mm
sash E85251
20
gasket ET130180.00
structural seal 6 mm
8
self-drilling screw
33
frame E85410
14.4 9
gasket ET130706.00
transom E85304
2
45.8
scale 1/2
10 B2310 (P5A)
5
23
gasket ET130458.00
gasket ET076651.00
89
130
191
flange ET076674.00
transom E85304
mullion E85104
41
50
B2310 (P5A)
cover cap E8701
pressure plate E8620
gasket ET130500.00
butyl seal ET133553.00
thermal insulation spacer ET080171.00
gasket ET130458.00
flange ET076674.00
56.3
60
50
23 5 23 8 89 41
2
E85C7.5
61 130
191
note:
scale 1/2 Under request Etem will provide additional information.
17
33
6.5
ET130469.00
50
2.8
30
30
MIN 100°
5 15
14.6 14.5
additional insulator for sash
ET080512.00
30
30
30
gasket ET130997.00
sash E85420
163
1.8
10
ET130470.00
extruded aluminium corner
bracket ET054668.00
gasket ET080542.00
82.2
extruded aluminium corner
bracket ET054667.00
extruded aluminium corner
bracket ET054666.00
cap E85618
88.7
6.5
GI205022.01
30
MIN 100°
30
10
E85C7.06
scale 1/2
17
33
6.5
ET130469.00
50
2.8
30
30
5 15
additional insulator for sash
14.6 14.5
MIN 100° ET080512.00
30
30
30
gasket ET130997
163
sash E85420
1.8
10
extruded aluminium corner
bracket ET054668.00
gasket ET080542.00
extruded aluminium corner
82.2
bracket ET054667.00
extruded aluminium corner
bracket ET054666.00
cap E85618
88.7
6.5
GI205022.01
30
MIN 100°
330
E85C7.07
scale 1/2
56.3
50
50
10
5
15
transom E85304
gasket ET130458.00
U profile 5100
L profile 4167
profile E66800
blind rivet
DIN 7337 A4.8x8-A
8 89 41
15 5 30 8 130
E85C5.8
scale 3/4
cutting lengths
transom
pressure plate
cover cap
Note:
All formulae noted here are informative only.
The designer/facade engineer responsible for specific
project must take into consideration the location of the
E85M8.1
not to scale
machinings of transom 2nd level drainage with spring t-joint and flange
mullion
A
flange
∅12
transom
18
15
gasket ET076651.00
DIN 7981 ST4.8x19-C-H
not to scale
machinings of transom 3rd level drainage with spring t-joint and flange
mullion
A flange
∅12
transom
18
tapping screw
DIN 7981 ST4.8x19-C-H
not to scale
mullion
flange
T-joint
transom
18
15
gasket ET076651.00
tapping screw
DIN 7981 ST4.8x19-C-H
E85M8.4
not to scale
mullion
flange
T-joint
transom
18
tapping screw
DIN 7981 ST4.8x19-C-H
E85M8.5
not to scale
7 6.5
15
5
15
mullion 20
46
17 15
8
flange
T-joint
transom
17
15
gasket ET076651.00
tapping screw
DIN 7981 ST4.8x19-C-H E85M8.6
not to scale
7
6.5
6
5
15
mullion
20
46
17 15
8
flange
T-joint
transom
17
6
silicone flange ET076680.00
tapping screw
DIN 7981 ST4.8x19-C-H
E85M8.7
not to scale
22.8
87
mullion
4 3
46
∅12
19
69
flange ET076676.00 87
44
∅16
T-joint ET071140.00
set ET071219.00
set ET071218.00
14
∅12
50
gasket ET076651.00
18.5 18 45
tapping screw
DIN 7981 ST4.8x19-C-H
∅12
reinforcement E85801 15 50
34
reinforcement ET071190.00
8
20
80
92
100 additional
DIN 7981 4.8x19 reinforcement ET994471.00 /optional/
9
14 12
74 12
100
note:
E85M8.8
In case of 2nd level transom, glazing shim reinforcement should be placed before connecting transom and mullion.
Additional reinforcement ET994471.00 has to be used in case of thicker glazings.
not to scale
T-joint ЕТ071143.00
96
22
∅10.5
22.8
132
mullion 4 ∅1 3
2
14
flange ET076667.00 19
114
132
74 ∅16
T-joint ET071143.00
set ET071219.00
set ET071218.00
14
25
DIN 7981 5.5x38
reinforcement ET071191.00
∅6
∅ ∅6 transom E85357
4.2 4.2
∅
reinforcement ET071191.00
8
20 additional
80 reinforcement ET994471.00 /optional/
92 DIN 7981 4.8x19
100
14 12 8
74 12 92
100 100
E85M8.9
note:
Additional reinforcement ET994471.00 has to be used in case of thicker glazings.
not to scale
fixing of 3rd level transom using transom connector E85994 at angle ≥ 90°
mullion
a° = 0° ~ 60°
(D-20) + 50 x sin(a°)
butyl seal X=
ET076681.00 between cos(a°)
mullion and transom
tapping screw
a° DIN 7981 ST4.8x19-C-H
tapping screw b
DIN 7981 ST4.8x19-C-H
tapping screw
DIN 7981 ST4.8x38-C-H
transom
90-a°
transom b, mm
E85351 25
E85352 45
E85353 43
E85354 63
E85355 83
E85356 103
E85357 133
E85358 153
E85359 173
E85M8.10
E85369 224
not to scale
83.15
68.55
57.2
48.0
40.3
33.6
27.7
22.4
17.5
12.9
8.5
Fixing devices have to 4.2
be placed coaxially Distance between
even though transoms fixing devices must be 0.0
are not parallel. evaluated according to 5° 10° 15° 20° 25° 30° 35° 40° 45° 50° 55° 60°
the following diagram, a(°)
so that to achieve
smooth transition of a° = 0° ~ 60°
the external webs of
every transom
a°
Capability of fastening
transom by screws on the
frontal face of fixing device
90-a°
not to scale
fixing brackets
min
120
fixed support
H
movable support
E85M8.13
H/2
not to scale
fixing brackets
L1 ET071121.00 ET071091.00
4 05
B8 L1
4 05
B8
H 120
H 90
L1
4 05 ET071172.00 ET071568.00
B8
L1
4 05
B8
H 115
H 72
4
B8 L1 ET071569.00
05
H 65
min
120
fixed support
H
movable support
H/2
E85M8.14
not to scale
fixed support
not to scale
movable
support
fixed
support E85M8.16
not to scale
movable B
support
anchor for concrete
(set with washer and nut)
ET903057.00
A
movable
support
fixed
support
E85M8.17
not to scale
fixing brackets
43.
2 ET071050.00 or 43.
E85913 profile 2
E85918 profile
H 140
nut М12 washer ø12
H 100
B2
20
B2
10
anchor М12х126
DIN 440
set for bracket as a hidden support
ET071213.00
anchor M12x126
min
120
120
H
min
min
min 120
120 120 min
H/2
note:
E85M8.18
accessories from profiles E85913 and E85918 can be produced and delivered with the
machinings, after ordering and specifing the mullion.
not to scale
30
4 30
movable support
mullion
cut for membrane
insert
30
mullion
fixed support ø4 35
ø11
M10x150
membrane
ø8
bar 50x8 mm
10
20
M8x40
B
not to scale
8
The joint between
drainage fitting and ST 2,9
mullion is sealed
with silicone
Put silicone on
the upper surface
10
The joint between
mullions is sealed
with silicone
shaped INOX or
aluminium sheet (1mm)
10
Rectangular standard
10 profile 40x4 mm
anchored in the middle
of the stiffener by
plastic deformation of
the tracks
ATTENTION:
The cutting length of the
27.5 horizontal pressure plate must
not be less than (L-55)
ST 2,9
ATTENTION:
Do not use a screw with greater size than the recommended, 27.5 L - 55
because it has to be covered by the horizontal cover cap L - 51
(shortest cover cap E85711 - 12mm)
E85M8.20
not to scale
1 1 1 1
2 2 2
2 2 2
2 2
2 2
E85M8.21
not to scale
water drainage
*upside down
apply only on the highest
max 8 m
mullion point!
Note:
- drainage profile ET074674.00 is used for
glazing with thickness between 28mm up to 30mm only!
not to scale
bottom finishing
mullion
27 4
transom
bracket
concrete slab
membrane
E85M8.23
not to scale
tapping screw
DIN 7981 ST2.9x6.5-C-H
a°
36
tapping screw
DIN 7981 ST4.8x19-C-H
accessory ET074674.00
transom E85320
membrane
a° = 30° ~ 83°
not to scale
tapping screw
DIN 7981 ST2.9x6.5-C-H cut from profile
ET085911.00
transom E85370
a°
accessory ET074674.00
tapping screw
DIN 7981 ST4.8x19-C-H membrane
6
16
a° = 0° ~ 83°
ATTENTION:
- drainage fitting from profile E85991 has to be cut on angle a° for each project
- accessory ET074674.00 must be inserted before assembly of mullions
E85M8.25
not to scale
a°
X X B = 25mm (min)
C = B - 4,5mm
X
article has to be cut at two B
points at the peak
axis of measuring angles
ø3
M6
M6 Grooves for
X X TIG-MIG
weldment
C
M8
M8 ATTENTION:
Welding is
compulsory
A
note:
The number of sets ET071216.00 needed has to be
determined by the facade engineer taking into
consideration the applied loads in each specific case.
not to scale
B = Cmin+X
X thickness of wall
bush M8x50
C ATTENTION:
countersunk bolt M8x25 welding is
compulsory
note:
all fixings are included in set
ET071216.00 for roof connection
not to scale
B = Cmin+X
6 X thickness of wall
B
144.5
E85106
bush M8x36.5
note:
∅15
The number of sets ET071006.00 needed has to be
determined by the facade engineer taking into
consideration the applied loads in each specific case.
E85M8.26_01
not to scale
machinings14.5
23.8
5
5
∅7
23.8
20 10 15 10 30
6 4 2 2.5 2.5
5.5 5
63 25
5.5 5
ATTENTION:
Apart from the submarginal drainage holes which have to be opened in any case
both on the pressure plate and cover cap, additional holes have to be opened in
the middle, in case that the length of the transom is greater than 1.25 m or if the
surface of the glass pane is greater than 2 m²
25
every 180~240
not to scale
B-B
28 34
thermal insulation spacer ET080172.00 thermal insulation spacer ET080172.00
gasket ET130474.00
water drainage
water drainage
A-A
150
150
note:
1. In case of 2nd level drainage, it is obligatory to use 150 mm butyl seal tape in both directions of the cross zone.
2. In case of roof constructions, conservatories, facades with inclinations and polygonal facades with 2nd level drainage, it is
E85M8.29
not to scale
cap E85713
cap E85723
tapping screw
DIN 7981 ST3.5x13-C-H
note:
all big cover caps (E85723, E85724, E85716, E85718) have
to be used with pressure plate E85745 and to
E85M8.30
not to scale
spacer E85924TR
ET071130.00 ET071130.00 ET071130.00
min 100
6
24
17
ET071130.00 ET071130.00
X
ET071130.00 ET071130.00
glazing shim ET071189.00
X
B
min 100
W1
40.2
235
300
150
100
100
not to scale
mullion
gasket
tapping screw
DIN ISO 7050 ST5.5x22-C-H
spacer E85924TR
E85M8.32
not to scale
10.5
10.5
13
13
40.1
40.1
19
19
6 6
4.5
20
scale 1:2 scale 1:2
ET053302.00
ET054457.00
ET056602.00
E70650
ET053302.00
ET054457.00
ET056602.00
E85M8.33
not to scale
E85M8.34
not to scale
tapping screw
°
45°
note:
glazing support E85615 is stocked in color
RAL 9005
E85M8.35
not to scale
45°
°
90
tapping screw
ISO 7049 3,5x16
note:
glazing support E85614 is
E85M8.36
not to scale
tapping screw
ISO 7049 3,5x16
tapping screw
ISO 7049 3,5x16
E85M8.37
not to scale
25.1
note:
E85M8.38
cutting of EPDM ET130706.00 and ET130707.00 has to be performed with patterns ET990522.00 and ET990521.00
not to scale
sash height(mm)
2000
ET994545.00 (old cone
1850
500R)
1750
1600
ET994545.00 (old
Maximum weight
1500
cone 500R)
105kg
1200
ET990858.00 (old cone 400R)
1100
Maximum weight 80kg
sash width (mm)
500
1350
1650
1750
1750
500
angle of height of
code type length, mm load, kg
opening, ° frame, mm
ET990858.00 adjustable 405 25 500 - 1200 80
E85M8.39
not to scale
E40956 (11mm)
etalbond
E85291
E85290
etalbond
ATTENTION:
etalbond protection membrane from etalbond
E85M8.40
not to scale
etalbond panels
L-20
E40956 (18.2mm)
46
50
50
etalbond
E85290
25
L-20*
ATTENTION:
* correction because of cutting dimensions of panel
etalbond cassette making. are for 4mm etalbond.
E85M8.41
not to scale
Cutting of profiles
W=width of frame
width of sash
H=height of frame
calculation of cutting length
height of sash
E85220
frame width of
2 W 2x45°
frame
height of
2 H 2x45°
frame
E85420
sash width of
2 W - 106.5 2x45°
sash
height of
2 H - 106.5 2x45°
sash
E85752 + E85751
cap cap width of
cap 2 W - 30 2x45°
height of
cap 2 H - 30 2x45°
E85618
cap width of
cap 2 W - 43 2x45°
height of
E85M8.42
cap 2 H - 43 2x45°
not to scale
calculation of cutting
width of sash
length for glass unit
h
sas
E85420
ght
sash
measure point
hei
cutting formula
dimension of glass unit
height of glass
not to scale
L
L\2
55
25
E85220
frame
14.9
7.5
22.5
73.5
98.3
22.5
7.5
5
L
L\2
75
55 E85220
25 frame
7.5
24.8
22.5
83.4
7.5
22.5
45
Note:
E85M8.44
The drainage openings shown here should be made only on the bottom side of the
roof window.
not to scale
L
L\2
140 140
110 30 30 30 110
38
48.8
7.5
E85420
sash
5
L
L\2
140 140
110 30 30 30 110
7.5
E85420
sash
5.6
35 30
7.5
18.5
E85420
sash
18 30
Note:
E85M8.45
The drainage openings shown here should be made only on the bottom side of the
roof window.
not to scale
18.6 18.6
150
150
∅8 ∅8
8mm
8mm
E85420
sash
∅8 ∅8
Note:
E85M8.46
The ventilation openings shown here should be made only on the upper side of the
roof window sash - as per the scheme.
not to scale
E85220
50
140
E85220
ET138011.00
ET130442.00
ET130442.00
236
48 140 48
E85420
E85420
86 A-A
12
31.2
86
8
A
12
15.2
Note:
E85M8.47
not to scale
B A
A-A B-B
14 12
12
30
30
85 75 E85420
sash
B A
ET994478.00
ET080540.00
A
A-A
E85420 90 E85220
sash
40
40
frame
55
30 30
15
15
E85220
frame
5
A
E85M8.48
not to scale
E85752 + E85751
cap cap
45°
45°
45°
45°
∅5
∅5
30
15 (60-70mm) 15
not to scale
5m
m
III - apply ET993990.00 on
the surface of the cut
II - clean the surface of the ET141152.00 and ET990855.00 in the ET993990.00
cut by using grooves for the joints
ET141152.00 and the grooves
for the joints by using
ET994356.00
ET994356.00
ET054665.00
ET990855.00
ET054666.00
ET054667.00
IV - put the joints in the V - remove all remains from the crimping machine from frame
chambers of frame E85220 E85220 by using ET141152.00, after that apply ET993990.00
ET141152.00
ET993990.00
VI - drill two openings VII - fill one of the
with diameter 5 mm as openings with ET993990.00
shown below (drill only till it fills up the chamber
one profile wall of frame and goes out from the
E85220) other opening
5mm
ET993990.00
E85M8.50
not to scale
ET994478.00
E85220
ET080542.00
ET080542.00
ET080542.00
I - clean frame Е85220 on the marked place, after this apply
ET994478.00, right before gluing gasket ET080542.00
°
90
ET080542.00
ET080542.00
10
Note:
Cut only the bottom part (at the handle side) of gasket ET080542.00 at angle of
90° and leave a gap of 5 mm. The gap is positioned in the middle of frame E85220
Cut gasket ET080542.00 partially on 2х45° in the corner as shown on the picture.
E85M8.51
When gluing the gasket on frame E85220, apply ET994478.00 on the frontal side
of gasket ET080542.00 and press for optimal result.
not to scale
ET138011.00 ET138011.00
ET138011.00
E85220
ET130469.00
°
90
30
Note:
Cut gasket ET130469.00 on the pointed spots
for drainage only at the bottom side (along ET138011.00 60
the slope) of the roof window.
Note: E85220
Cut gasket ET130469.00 partually on 2х45° in
the corner as shown on the picture. ET130469.00
When gluing the gasket on frame E85220
apply ET138011.00 on the frontal side of
E85M8.52
not to scale
ET994356.00
ET993990.00
II - apply ET993990.00 on the
surface of the cut and apply
ET990855.00
in the chambers for joints
ET054669.00 ET990855.00
ET054668.00
IV - remove all remains from the
III - put the joints in the chambers crimping machine from sash E85420
of sash E85420 by using ET141152.00,after that
apply ET993990.00
ET141152.00
ET993990.00
E85420
GI205022.01 ET994478.00
E85220
V - before putting the glazing, assemble frame Е85220 and sash Е85420 VI - put the appropriate gasket in the groove
by using triple hinges GI205022.01 of the sash E85420 according to the glazing
table.
Glue the corners of the gasket with
ET994478.00
Note:
E85M8.53
not to scale
I - clean the surface of the cut of the cover E85618 by using ET141152.00
ET141152.00
III - After mounting the four covers E85618, drill the two mullions on the pointed
spots by using ∅4mm tool.
IV - After mounting the four covers E85618, secure each of them with three
∅4 ∅4 screws DIN 7504N 4,2x16 A2/A4 at 150 mm distance from the cut and in the
middle.
E85220
E85420
E85618
∅4 ∅4
Note:
ISO 7050 3,5x22- A2/A4
E85M8.54
glazing shims
ET138011.00
ET080512.00
Note:
E85M8.55
I - Clean the cover cap Е85752 on the pointed spot, after that apply ET138011.00 and put ET130467.00
gasket ET130467.00
E85752
ET138011.00
ET130468.00
ET141152.00
ET130131.00
ET130174.00
ET994356.00
III -clean the surface of the cut by using ET141152.00
and the groove for the joint by using ET994356.00
ET990855.00
IV - Apply ET990855.00 in the chamber of the cap, after that put joints
ET054667.00
ET054667.00
ET130131.00
Note: ET130174.00
gasket s:
Glue ET130468.00 and ET130467.00 by ET130467.00
using ET138011.00
gasket : Glue ET130131.00/ET130174.00
E85M8.56
by using ET994478.00
not to scale
III - After fixing the cap, drill the sash through the
openings of the cap by using ∅3,5 mm tool and wind
up the rest of the screws.
∅3.5
∅3.5
Note:
E85M8.57
not to scale
E85M8.58
not to scale
not to scale
GLAZING OPTIONS
system
ET130473.00 ET130474.00 ET130455.00 ET130463.00 ET130457.00 ET130458.00 ET130479.00 ET130470.00 ET130480.00 ET130997.00
X
47.5
303
ET130462.00 ET130181.00 ET130167.00 ET130182.00
X mm
3 mm
E85
E85
E85M8.59
curtainwall
wall system
system E85
curtain E85
glazing options
Note:
1. If you are using mullion with 2nd level drainage, you should choose: 1+2+4+5+6+8 (one tapping screw on every 250mm).
2. If you are using mullion with 3rd level drainage, you should choose: 1+3+4+5+7+8+9 (one tapping screw on every 250mm).
3. Those are most appropriate combination between gaskets but not all possible.
4. The glass thickness could be up to 56mm.
* For combinations with glazing from 28 to 32mm could be used also thermal insulation spacer ET080518.00.
28mm ET080171.00
ET130480.00 ET130480.00 ET130463.00
and ET071184.00 ET071189.00 ET993031.00
(6+16+6) 12mm 12mm 6mm
ET080183.00 *
ET080171.00
30mm ET130480.00 ET130480.00 ET130463.00
and ET071183.00 ET071181.00 ET993031.00
12mm 12mm 6mm
(8+16+6) ET080183.00 *
32mm ET130480.00 ET130480.00 ET130463.00
ET080174.00 ET071183.00 ET071181.00 ET993031.00
(6+20+6) 12mm 12mm 6mm
32mm ET080171.00
ET130470.00 ET130470.00 ET130474.00
and ET071183.00 ET071181.00 ET993031.00
(8+16+8) 10mm 10mm 4mm
ET080183.00 *
34mm ET130470.00 ET130470.00 ET130474.00
ET080174.00 ET071183.00 ET071181.00 ET993031.00
(10+16+8) 10mm 10mm 4mm
37mm ET130473.00
ET130457.00 ET130457.00
3mm + washer ET080174.00 ET071183.00 ET071181.00 ET993031.00
(10+16+5.5.2) 7mm 7mm
10x6x2mm
Note:
1. If you are using mullion with 2nd level of drainage, you should choose: 1+2+4+5+7.
2. If you are using mullion with 3rd level of drainage, you should choose: 1+3+4+6+7.
3. Those are most appropriate combination between gaskets but not all possible.
* If you are using accessory ET080171.00, you should use also ET080183.00 with an appropriate numbers.
071207.00 1 MF
fix support
ET
movable support
ET071207 old code
if support is fixed:
2 x ET 072084.00
if support is movable:
1 x ET 072085.00
071090.00 1 MF
fix support
ET
movable support
ET071090 old code
if support is fixed:
1 x ET 072084.00
fixing bracket 90 mm
if support is movable:
1 x ET 072085.00
071150.00 1 MF
fix support
ET
movable support
ET071150 old code
if support is fixed:
2 x ET 072084.00
if support is movable:
1 x ET 072085.00
071590.00 1 MF
fix support
ET
movable support
ET071590 old code
if support is fixed:
1 x ET 072084.00
fixing bracket 90 mm
if support is movable:
1 x ET 072085.00
A85-01
071567.00 1 MF
fix support
ET
movable support
ET071270 old code
071072.00 1 MF
fix support
ET
movable support
ET071072 old code
071165.00 1 MF
fix support
ET
movable support
ET071265 old code
071566.00 1 MF
fix support
ET
movable support
ET071250 old code
071591.00 1 MF
fix support
ET
movable support
ET071572 old code
071565.00 1 MF
fix support
ET
movable support
ET071565 old code
071121.00 1 MF
fix support
ET
movable support
ET071121 old code
071091.00 1 MF
fix support
ET
movable support
ET071091 old code
fixing bracket 90 mm
A85-03
071172.00 1 MF
fix support
ET
movable support
ET071172 old code
071568.00 1 MF
fix support
ET
movable support
ET071372 old code
fixing bracket 72 mm
071569.00 1 MF
fix support
ET
movable support
ET071165 old code
fixing bracket 65 mm
ET 071057.00 1 MF
ET071050 old code
E85101
ET 071058.00 1 MF
E85101
ET 071063.00 1 MF
E85102
ET 071064.00 1 MF
E85102
ET 071053.00 1 MF
E85103
ET 071054.00 1 MF
E85103
ET 071059.00 1 MF
E85104
ET 071060.00 1 MF
E85104
ET 071067.00 1 MF
E85105
ET 071066.00 1 MF E85105
ET 071055.00 1 MF
E85106
ET 071056.00 1 MF
E85106
ET 071061.00 1 MF
E85107
ET 071062.00 1 MF
E85107
ET 071051.00 1 MF
E85108
ET 071052.00 1 MF
E85108
ET 071050.00 1 MF
ET 072084.00 1 MF
ET 072085.00 1 MF
ET 071213.00 1 MF
ET071213 old code
ET 071216.00 1 MF
ET071216 old code
ET 071218.00 1 MF
ET071218 old code
ET 071219.00 1 MF
ET071219 old code
ET 071208.00 1 MF
ET071208 old code
washer
ET 991178.00 - MF
DIN440 old code
washer
A85-10
ET 993057.00 1 MF
07M12123S old code
ET 225017.00
galvanized anchor M12x126
ET 071209.00 50 MF
ET071209 old code
ET 074674.00 50
ET074674 old code
ET 074657.00 50
ET074657 old code
E85723
ET 074885.00 50
E85728
ET 076651.00 50
ET076651 old code
ET 076680.00 200
ET076680 old code
ET 076681.00 6m
ET076681 old code
ET 071113.00 100 MF
ET071113 old code
ET 076671.00 800
ET076671 old code
ET 076672.00 600
ET076672 old code
ET 076673.00 600
ET076673 old code
E85303
PVC flange for transom
ET 076674.00 400
ET076674 old code
ET 076675.00 350
ET076675 old code
ET 076676.00 440
ET076676 old code
ET 076677.00 400
ET076677 old code
ET 076660.00 100
ET076660 old code
ET 076661.00 100
ET076661 old code
E85351
PVC flange for transom
A85-15
ET 076662.00 100
ET076662 old code
E85352
PVC flange for transom
ET 076663.00 100
ET076663 old code
ET 076664.00 100
ET076664 old code
ET 076665.00 100
ET076665 old code
ET 076666.00 100
ET076666 old code
E85356
PVC flange for transom
ET 076667.00 100
ET076667 old code
ET 076668.00 100
ET076668 old code
ET 076669.00 100
ET076669 old code
E85359
PVC flange for transom
A85-17
ET 076670.00 100
ET076670 old code
ET 076622.00 200
ET076622 old code
ET 076623.00 200
ET076623 old code
ET 076624.00 200
ET076624 old code
ET 076625.00 200
ET076625 old code
ET 071122.00 300 MF
ET071122 old code
ET 071123.00 350 MF
ET071123 old code
ET 071124.00 280 MF
ET071124 old code
ET 071125.00 200 MF
ET071125 old code
ET 071126.00 170 MF
ET071126 old code
ET 071127.00 140 MF
ET071127 old code
ET 071131.00 320 MF
ET071131 old code
ET 071132.00 300 MF
ET071132 old code
ET 071133.00 280 MF
ET071133 old code
ET 071134.00 210 MF
ET071134 old code
ET 071135.00 180 MF
ET071135 old code
ET 071136.00 156 MF
ET071136 old code
ET 071137.00 110 MF
ET071137 old code
ET 071138.00 100 MF
ET071138 old code
ET 071139.00 96 MF
ET071139 old code
ET 071146.00 50 MF
ET071144 old code
ET 071140.00 100 MF
ET71140 old code
reinforced T-joint 87 mm
for transom E85306
2nd level drainage
ET 071143.00 80 MF
ET71143 old code
ET 071152.00 250 MF
ET071152 old code
ET 071153.00 150 MF
ET071153 old code
ET 071141.00 300 MF
ET071141 old code
ET 071142.00 150 MF
ET071142 old code
ET 071130.00 100 MF
ET071130 old code
ET 071116.00 - MF
ET 071117.00 - MF
ET 071180.00 500 MF
ET071180 old code
ET 071181.00 200 MF
ET071181 old code
ET 071189.00 200 MF
ET071185 old code
ET 071182.00 350 MF
ET071182 old code
ET 071183.00 300 MF
ET071183 old code
ET 071184.00 350 MF
ET071184 old code
ET 994471.00 200 MF
ET071186 old code
ET 071190.00 100 MF
ET071187 old code
ET 071191.00 100 MF
ET071188 old code
ET 071200.00 - MF
ET 071203.00 - MF
ET 053302.00 250 MF
ET053302 old code
E85400 E85200
die custed aluminium
joint corner bracket
E85410
ET 054457.00 180 MF
ET054457 old code
E85400 E85200
extruded aluminium joint
corner bracket 35,8 mm
E85410
ET 054459.00 200 MF
ET054459 old code
ET 054458.00 250 MF
ET054458 old code
ET 054462.00 300 MF
ET054462 old code
E85210
extruded aluminium joint
corner bracket 3.5 mm
E85211
ET 054494.00 - MF
E85261
extruded aluminium joint
corner bracket 37.2 mm
A85-29
attention
always use epoxy resin
for long lasting joining E85251
ET 130473.00 80
ET130473 old code
EPDM gasket
for glazing 3 mm
ET 130474.00 100
ET130474 old code
EPDM gasket
for glazing 4 mm
ET 130462.00 100
ET130462 old code
EPDM gasket
for glazing 4 mm
A85-30
ET 130455.00 100
ET130455 old code
EPDM gasket
for glazing 5 mm
ET 130181.00 200
ET130181 old code
EPDM gasket
for glazing 5 mm
ET 130463.00 80
ET130463 old code
EPDM gasket
for glazing 6 mm
ET 130457.00 110
ET130457 old code
EPDM gasket
for glazing 7 mm
A85-31
ET 130458.00 100
ET130458 old code
EPDM gasket
for glazing 8 mm
ET 130167.00 120
ET130167 old code
EPDM gasket
for glazing 8 mm
ET 130479.00 100
ET130479 old code
EPDM gasket
for glazing 9 mm
ET 130470.00 100
ET130470 old code
EPDM gasket
for glazing 10 mm
A85-32
ET 130182.00 100
ET130182 old code
EPDM gasket
for glazing 10 mm
ET 130480.00 100
ET130480 old code
EPDM gasket
for glazing 12 mm
ET 130997.00 65
EPDM gasket
for glazing 15 mm
ET 130500.00 140
ET130500 old code
ET 130801.00 30
ET 130802.00 30
ET 133553.00 10
ET130553 old code
ET 133551.00 10
ET130551 old code
ET 130126.00 110
ET130126 old code
ET 130705.00 120
ET130705 old code
ET 130180.00 350
ET130180 old code
ET 130199.00 100
ET130199 old code
ET 130198.00 200
ET130198 old code
ET 130461.00 110
ET130461 old code
ET 130706.00 45
ET130706 old code
ET 130707.00 110
ET130707 old code
ET 130731.00 -
ET 130730.00 -
polyamide joint
ET 080171.00 6
ET080171 old code
thermal insulation
PVC spacer 16 mm
A85-37
ET 080174.00 6
ET080174 old code
thermal insulation
PVC spacer 21 mm
ET 080172.00 6
ET080172 old code
thermal insulation
PVC spacer 25 mm
ET 080173.00 6
ET080173 old code
ET 080518.00 70
ET 080519.00 -
ET 080177.00 6
ET080177 old code
24
ET 080165.00 6
ET080184 old code
28
ET 162058.00 1
ET162058 old code
ET 990520.00 1
ET990520 old code
ET 990523.00 1
ET990523 old code
ET 950754.00 10 MF
GI2236 old code
GI206684.00 20
GI04041 old code
antibreack dispositive
A85-40
GI206700.00 10
GI4020 old code
ET 990858.00 10 MF
BE400R old code
ET 991913.00 10 MF
BE600R old code
ET 994545.00 10 MF
GU255613.00 - L 10 MF
GU255610.00 - R 10 MF
BE900R old code
ET 071011.00 100 MF
BE700R old code
ET 211152.00 100 MF
BE800R old code
GI255601.01 20
GI255601.02 20
NOVA
A85-42
GI235018.01 10
GI235018.02 10
Euro
GI255602.00 200 MF
locking pawl
GI255603.00 50 MF
striker
ET 054665.00 70 MF
ET 054666.00 300 MF
ET 054667.00 300 MF
ET 054668.00 300 -
ET 054669.00 100 MF
ET 054667.00 300 MF
E85752
extruded aluminium corner
bracket 4.4 mm for
E85752
ET 080512.00 100
ET 130467.00 100
ET 130468.00 100
ET 130469.00 100
GI205022.01 50
GI205022.02 50
ET 130131.00 200
ET 130174.00 160
gasket
ET 080542.00 1
gasket
A85-46
ET 080541.00 1
gasket
ET 993990.00 - -
Terostat
ET 994478.00 - -
Unionzement - black
ET 141152.00 - -
Cleaner
A85-47
ET 994356.00 - -
Cleaner
ET 990855 1 -
ET 138011 1 -
Silicone
ET 130442.00 1 -
gasket
A85-48
GI212701.01 1
GI212701.02 1
GI255613.00 1 MF
GI255614.00 1 MF
GI255563.00 2 MF
ET 080540.00 1
gasket
ET 130030.00 20
ET 162185.00 - -
ET 130721.00 65
ET 073085.00 100 -
A85-51
Declaration of performance
№
8. Declared performance:
Essential characteristics Performance Harmonized technical specification
Watertightness 7A
Resistance to wind load C3
Sound insulation 38 (-1;-2) dB EN 13830:2004
Air permeability 4
Thermal transmittance 1,7 W/(m2.K)
Place and date of issue: Signature:
Sofia, 01.07.2016 ………........................…………
365
CURTAIN WALLING
1. EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
2. EN 13119 - CURTAIN WALLING – TERMINOLOGY
3. CWCT STANDARD FOR SYSTEMIZED BUILDING ENVELOPES
4. EN 12152 - CURTAIN WALLING - AIR PERMEABILITY - PERFORMANCE REQUIREMENTS AND CLASSIFICATION
5. EN 12153 - CURTAIN WALLING - AIR PERMEABILITY - TEST METHOD
6. EN 1026 - WINDOWS AND DOORS - AIR PERMEABILITY - TEST METHOD
7. EN 12154 - CURTAIN WALLING - WATERTIGHTNESS - PERFORMANCE REQUIREMENTS AND CLASSIFICATION
8. EN 12155 - CURTAIN WALLING - WATERTIGHTNESS - LABORATORY TEST UNDER STATIC PRESSURE
9. EN 13050 - CURTAIN WALLING - WATERTIGHTNESS - LABORATORY TEST UNDER DYNAMIC CONDITION OF AIR
PRESSURE AND WATER SPRAY
10. EN 1027 - WINDOWS AND DOORS - WATER TIGHTNESS - TEST METHOD
11. EN 13116 - CURTAIN WALLING - RESISTANCE TO WIND LOAD - PERFORMANCE REQUIREMENTS
12. EN 12179 - CURTAIN WALLING - RESISTANCE TO WIND LOAD - TEST METHOD
13. EN 14019 - CURTAIN WALLING - IMPACT RESISTANCE - PERFORMANCE REQUIREMENTS
14. EN ISO 10077 (12) - THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL
TRANSMITTANCE
15. EN 12412-2 - THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - DETERMINATION OF THERMAL
TRANSMITTANCE BY HOT BOX METHOD - PART 2: FRAMES
16. EN ISO 10140-1- ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART
1: APPLICATION RULES FOR SPECIFIC PRODUCTS
17. EN ISO 717-1 - ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1:
AIRBORNE SOUND INSULATION
366
HATCHES
Hatches for different materials
367
Copyright© I Edition 2019 ETEM (update May, 2019)
is
368