Professional Documents
Culture Documents
Instrument Status List
Instrument Status List
Liquid crystal display, connected with water temperature sensor, water temperature
block long display, do not connect not display.
0 pieces 3 4 5
piece 1 pieces 2 pieces
pieces pieces flashes
6. Water temperature gauge
resistan 699-558 557- 193- 136- 125-
82Eur
ce(Ω Europe 194Eur 137Eur 126Eur 83Euro
ope
) ope ope ope pe
B. in the total (ODO) interface, long press the key for 8 seconds to switch between
metric system and English system. The default is metric system. After switching, it
can be saved even if the power is completely cut off.
C. in the trip interface, long press the key for 4 seconds to clear the subtotal.
8. Key Function
D. in the total (ODO) interface, long press the key for 4 seconds to release, enter the
clock setting, the hour position flashes, the second point does not flash, short
press the key plus 1, long press the key for 3 seconds to switch to the minute
position second flash, the second point does not flash, and then long press the
key for 3 seconds to save the exit or 10 seconds to save the exit automatically
without operation.
12 hour system, cold start am10:00, in the total (ODO) interface, long press the key for
4 seconds to release, enter the clock setting, the hour position flashes, the second
9. Clock adjustment point does not flash, short press the key plus 1, long press the key for 3 seconds to
switch to the minute position second flash, the second point does not flash, and then
long press the key for 3 seconds to save or 10 seconds to save automatically.
10. Backlight LCD backlight: white.
11. LCD screen The 6 point.
12. sensor
From the
cable side ①Red and black: RPM signal
②Brown Red: fault symbol
① ② ③ ③Black: electric door lock
④ ⑤ ⑥ ④Shallow orchid: turn right
13. ⑤Blue: high beam
⑦ ⑧ ⑨
⑥Orange: turn left
⑦Red: battery (normal, 12V positive)
Terminal DJ621-E2.8*0.5 ⑧Blue / White: fuel signal
Plastic
DJ7091A-2.8-21 white ⑨Green: negative
Parts
From the
cable side
Green / red: N file
N ① ②
Pink: 1st gear
③ ④ ⑤ Blue / red: 2 files
14.
Green / Black: 3 files
Terminal DJ621-E2.8*0.5 Yellow / red: 4 files
Plastic Yellow / white: 5 files
DJ7061A-2.8-21 white
Parts
16.
From the
cable side
Terminal DJ621-E2.8*0.5
Plastic
DJ7031A-2.8-21
Parts
1 background parameter setting
1.1. Press and hold the key first, then open the switch lock, and enter the back door setting in 5S, which is divided into 6 interfaces
1.5. Interface 4: two lines and three lines fuel setting (two lines and three lines can be set in the general item of upper computer)
The 188 first digit of the vehicle RPM display shows 4, the total cumulative display e ---- 2, 2 represents the second line oil meter, set as the
third line display e ---- 3, set as the second line display e ---- 2, short press the key to switch the third line / second line. Press and hold the
key for 3S to enter the cumulative reset interface.
1.6. Interface 5: metric and English settings (this point should be included in the general settings on the upper computer)
The 188 first digit of the vehicle RPM display shows 5, and the lower right corner shows km / h. short press km / h to switch to mph. Press
and hold the key for 3S to enter the mileage clearing interface. Default value km / h