Date: April 26, 2022 Subject: APLED 121-instructions report
How to Surface prep a car
It is very important to properly prep the surface of the car. The reason it is so important to prep it properly is because the surface could corrode, or the paint could not spray on correctly and fail. Therefore, making sure you follow each step properly is important otherwise the shop could lose money. These 15 easy steps below will help you properly prep the surface of a car. Tools and materials needed:
Make sure to always wear your PPE while in the shop.
1. Clean the car with water and soap 2. Completely dry 3. Remove trim or emblems 4. Check for damage 5. Use body filler if needed 6. Put up masking tape and paper 7. Start sanding with sandpaper of choice 8. Sand until its not shiny or until its bare metal
9. Wash and wax and grease remove car
10. Spray primer 11. Wait 20 minutes for primer to dry 12. Use tac rag 13. Spray another coat of primer 14. Use tac rag 15. Block out the primer sprayed These are all the proper steps to successfully prep the surface of a car. The prep stage is the most important stage of the repair. Make sure you read and understand the instructions for better results. Results may vary depending on how the steps are followed.