Professional Documents
Culture Documents
Micro Soldering With Hot Air Station
Micro Soldering With Hot Air Station
MobileRepairingOnline
Teaching Samsung,iPhone, and Smartphones repairing courses online Published many free Books on Repairing
of Cell phones, Android phones, Apple iPhone,iPad, and others. Get trained today to build your career in Android
smartphones and tablets repairing contact: +92-312-2906096 email mobilerepairingonline@gmail.com
Pages
● home
● Mobile repairing course
● Sign Up Now
● Mobile Repairing Tools
● Micro Soldering Repair Training
● Best Heat Gun Rework Station for Mobile Phones
● Cell Phone Repairing Book 2019
● Phone Diagram Collection Book
In this blog post, I am about to explain What are some common uses of a rework station in mobile
phone repairing? to do that let us start form analog rework station overview
Now in analog hot air station, there are two knob Air and heater.
Heater element exists in Handle that is directly controlled by this knob. If you'd turn it on the
button, this red light gets on also, you turn this button as per need.
station power button
there is a Heater inside the Handle and it gets it red when the heat gun is continuously on
Means is now is too much hot.
Besides a heat gun, you’ll need a few more mobile hardware repairing tools like soldering flux,
heat resistant tape, biological knife, screwdriver, Tweezer, BGA reballing paste, and BGA
stencils.
If you already have digital rework station and dont know how to do soldering work on
smartphone circuits and technical details read this blog post
Some Common Uses of Analog Hot Air Station in Cell Phone Repair
to work on small components. moved up the knob of heater option to number two.
set on 200
You can also move it to three if you need. one thing very important that the numbers you'll see
around the knobs are actually 100, 200, and 300 so you should very careful via using this. If you
move the knob to Number two it means 200 and a midpoint is 250. for big components, You turn
it on to three and keep air mini. what is mini?
set on 250
mini means that you keep air position on the analog hot air station between two and three.
soldering flux is a liquid paste which is applied at the edges of all IC integrated circuits before
resoldering or moving. smd hot air rework station heating and hot air help melt solder paste into
the IC beneath.
Then you close it to your component for heating as well as touch the device to absolves the
components works or not and keep giving heat.
when it gets too much hot Then leave it from the tweezer slowly.
Watch tweezer demonstration Video
As you can see in the image hold the component from the tweezer and move it very slowly by
using
finger while giving heat by smd hot air gun continuously the component will separate when silver
shine comes as you see in the image.
it gets separate
put the component on the place and give heat gives silver shine.
resolder component
in this image, there are too many components but don't use the heat gun in complicated areas
As you can see, these parts that are fixed on the side can easily move or separate by the Heat
gun
to solder IC You keep your heat gun heater knob on and keep Air Normal in this picture these
ICs
IC is highlighted in red
can easily be removed so set your heat gun on 350 and keep Air Normal If you have too much
heat can set on 350
wait for heating that as per need heat can be little increased
heat resistant tape is easily available in markets. this tape absolves heat.
Means if you apply on a specific component, those components do not get hot.
Now Doing Soldering Practical on Microchips
this is microchip
In the picture, you'll see it. It can be called the microchips. to remove microchips.
Drag soldering
Your heater should be on 4.5 and air would be in normal like med. Remember that you will have
to revolve your heat gun while working.
Rework Station also called BGA Rework Station. Rework Station also called BGA Rework Station.
To work on balls grid array IC you have to use some additional mobile repair tools and components
to give heat from the bottom on the IC.
BGA ICs means dose ICs that are punched by machines on a circuit and fixed the corners
pasted IC image
with any kind of glue. To remove this IC. Take a knife that is used in a biological laboratory and
feed it
until unless it gets red from the front. remember one thing that paste must use in fixing chips, so
take the
hated knife and place it slowly, slowly
as you'll see in the video in this process hated a knife easily move into the chip. This BGA chip,
similarly
remove as previous you're a
for unsolder BGA IC
hater should be on 4.5 and air would be a normal like med use paste and remove the chip but if
you place
this BGA chip to another circuit, then you will have to make balls.
reballing tools
the black paper you'll see is that different Stencil. now Put down the IC under that stencil,
then you will do it. It becomes balls for pasting the IC.
to remove the IC is the same as you have already seen, but this is very fragile so the heat it
lightly
in this process Keep the air in mad then move it on 3 while working and heat must be in
between
3 to 4 when
You'll see the little bubbles while heating apply this paste
it means the IC is resoldering Now Stop the heat gun and wait for IC to get Cool.
These filter ICs. to remove These move heater point on 4.5 and if needed, move to 5 and air
always normal.
when remove
As you can see these walls are clean by using the soldering iron.
solder wire to clean
As these silver prints can be seen then pays the pump bob that is available in the market hold
the circuit by using a screwdriver and then apply the heat by the heat gun.
if you want to know more about soldering iron, solder station and new mobile repairing tools
special price
like desoldering tweezers How to Use Them read this article on Micro Soldering Repair Training
Mobile repairing online
Mobile repairing Online training and repairing center was
established by muhammad Asif Azeemi to apply his rich
experience in Mobile Phones repairing education
Administrating Director
Muhammad Asif
stay in touch join us on social media.......
Contact Us : obilerepairingonline@gmail.com
+92-312-2906096 email : m