Professional Documents
Culture Documents
2.-DataSheet - Kaise VHR - TL48100LFP-3U Specification (EN)
2.-DataSheet - Kaise VHR - TL48100LFP-3U Specification (EN)
PRODUCT SPECIFICATION
friendly tech
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
Revision History
www.tempelgroup.com 2/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
Content
1. General Informa�on ................................
................................
................................
................................
..........................
4
1.1. Scope ................................
................................
................................
................................
................................
.............4
1.2. Applica�ons ................................
................................
................................
................................
................................
.4
1.3. Product Classifica�on ................................
................................
................................
................................
...............4
1.4. Model No. ................................
................................
................................
................................
................................
....4
1.5. Working Principal and Working Status ................................
................................
................................
..............4
1.6. Electrical Sp ecifica�on ................................
................................
................................
................................
..............5
1.7. Basic Parameter ................................
................................
................................
................................
.........................
6
1.8. Protec�on Parameter Se�ng ................................
................................
................................
................................
7
1.9. Func�ons and Features ................................
................................
................................
................................
...........9
2. Appearance and Dimension ................................
................................
................................
................................
........12
2.1. Appearance ................................
................................
................................
................................
..............................
12
2.2. Dimension ................................
................................
................................
................................
................................
. 12
2.3. Interface ................................
................................
................................
................................
................................
.....13
3. Charge /Discharge Modes and Condi�ons ................................
................................
................................
.............15
3.1. Charge Modes and Condi�ons ................................
................................
................................
..........................
15
3.2. Discharge Modes and Condi�ons ................................
................................
................................
.....................
15
4. Tests ................................
................................
................................
................................
................................
....................
16
4.1. Measurement Apparatus ................................
................................
................................
................................
.....16
4.2. Tes�ng Condi�on ................................
................................
................................
................................
...................16
4.3. Test Descrip�on ................................
................................
................................
................................
......................
16
5. Shipment ................................
................................
................................
................................
................................
...........18
6. Storage ................................
................................
................................
................................
................................
...............19
7. Cau�on and Prohibi�on in Handling ................................
................................
................................
.......................
19
www.tempelgroup.com 3/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
1. General Informa�on
1.1. Scope
This specifica�on defines the product specifica�on of the rechargeable Lithium Ion Ba�ery supplied by
Kaise
1.2. Applica�ons
Telecom BTS power backup, Small or Medium-Sized Renewable Energy Storage System
www.tempelgroup.com 4/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
www.tempelgroup.com 5/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
(2) Standard charge : 54.0V ± 0.05V constant voltage and( 0.2CA) current limited charge, for 2.0 hours at 25 ± 3℃
(3) Suggest charge method: At the ambient temperature 30℃ ± 5℃, Set charger voltage to 54.0V
a. Charge the ba�ery with 50A(0.5C) un�l any cell reach 3.65V, to step b;
b. Charge the ba�ery with 20A(0.2C) un�l any cell reach 3.65V, to step c;
c. Charge the ba�ery with 12A(0.12C) un�l any rest cell reach 3.65V, charge finish.
www.tempelgroup.com 6/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
www.tempelgroup.com 7/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
www.tempelgroup.com 8/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
55 ± 2 ℃
Acceptability range:
Discharging high
on Yes 60 ℃
temperature protec�on 60 ± 2 ℃
Acceptability range:
Discharging high
on Yes 55℃
temperature recovery 55 ± 2 ℃
Acceptability range:
Charging low
on Yes 0 ℃
temperature protec�on 0±2 ℃
Acceptability range:
Charging low
on Yes 5 ℃
temperature recovery 5±2 ℃
Acceptability range:
Discharging low
on Yes -20℃
temperature protec�on -20 ± 2 ℃
Acceptability range:
Discharging low
on Yes -10 ℃
temperature recovery -10 ± 2 ℃
www.tempelgroup.com 9/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
be set) or the total voltage is lower than the Charge, reset bu�on, so� The ba�ery with a so�
2
overall over-discharge protec�on value (can be switch switch can be waked up.
sleep is entered.
www.tempelgroup.com 10/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
www.tempelgroup.com 11/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
2.1. Appearance
There shall be no defects (deep scratch, crack, rust, discoloration, leakage, and so on), which may adversely
affect the commercial value of the module.
2.2. Dimension
www.tempelgroup.com 12/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
Terminal
Nominal Nominal Dimension
Model No. Weight Install Remarks
Voltage Capacity (W X D X H, mm) Material Type
way
Width: 455.0mm (±2)
TL48100LFP- Approx. laser wel
48V 100Ah Depth: 540.0mm (±2) Steel - 3U
3U 48kgs ding
Height: 132.0mm (±2)
2.3. Interface
2.3.1 Drawing of Front Panel and Interface Descrip�on
www.tempelgroup.com 13/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
7 RS485_B
4 RS485_A
8 GND (Grounding)
1/2/3/5/6 NC
www.tempelgroup.com 14/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
Light Ex�nguish
www.tempelgroup.com 15/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
-20℃ 0℃ Discharge Current: 0.1C Discharge Current: 0.5C Discharge Current: 1.0C
0℃ 20℃ Discharge Current: 0.2C Discharge Current: 0.5C Discharge Current: 2.0C
20℃ 50℃ Discharge Current: 0.2C Discharge Current: 1.0C Discharge Current: 3.0C
4. Tests
Temperature: 25 ± 3℃;
www.tempelgroup.com 16/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
3 Charge and discharge test Comply with Technical Design Actual measurement
Requirement
4 Insula�on Actual measurement
www.tempelgroup.com 17/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
BMS Test
SOC es�ma�on accuracy is tested
under different voltage, current and
temperature:
1. High-precision voltmeter, test
monomer voltage and BMS
Sampling error (current, acquisi�on voltage comparison;
Comply with Technical Design
1 voltage, temperature, 2. Conduct charging and discharging
Requirement
accuracy) test on the equipment and compare
current data.
3. Infrared thermometer, tes�ng
temperature comparison between
each temperature control point and
the collected temperature of BMS;
In the charging and discharging
process of the test capacity, the
actual discharge capacity when the
intercep�on of SOC is 30%, 50% and
2 SOC es�ma�on accuracy ≤8% 90%, and the discharge
capacity/actual total capacity ra�o is
obtained to obtain the real SOC, and
the SOC value is displayed by the host
machine.
Temperature sampling
3 No less than 8 Checking on host machine
quan�ty
5. Shipment
The ba�ery should be packed in cartons under the condi�on of half capacity 20%-50% for shipment. The violent
vibra�on, impac�on or squeezing should be avoided in the transport process; neither is exposed in the sunlight
nor rain. The ba�eries shall be shipped by normal transporta�on such as by road, by train, by ocean or by air.
www.tempelgroup.com 18/19
RECHARGEABLE LITHIUM ION BATTERY PRODUCT SPECIFICATION
6. Storage
The ba�ery storage shall be in the clean and dry ven�la�on room at the temperature of 0∼40°C and shall keep
out of fire or heat and avoid touching corrosion elements. The ba�eries shall be charged every 8 or 12 months
(0 ~ 30 - 12month, 30 ~ 40℃ - 8 month) during storage.
Cau�ons
Please read the user manual carefully before using the lithium ion ba�ery.
No human body shall direct contact the posi�ve/nega�ve poles at the same �me if the ba�ery’s voltage
exceeds 36V safety voltage.
Please read the specific charging device’s user manual carefully before charging.
When the ba�ery is not charged a�er long exposure to the charger, discon�nue charging.
Please check the posi�ve (+) and nega�ve (-) direc�on before connec�on.
Ba�ery must be stored in a dry area with low temperature (≤25°C) environment for long-term storage.
Do not expose the ba�ery in direct sunlight or heat.
Do not use the ba�ery in high sta�c energy environment where the protec�on device can be damaged.
When rust or smell is detected on first use, please return the product to the seller immediately.
Keep the ba�ery out of reach of children and pets.
When ba�ery life span shortens a�er long period of usage, please exchange to new ba�ery.
No metal objects (rings, watches, and other metal accessories, etc.) can be worn during the handling of
ba�ery.
Charge �me should not be longer than specified in the manual.
Do not expose the ba�ery out of the temperature range specified in the specifica�on.
Prohibi�ons
Do not use different charger to charge the battery.
Do not charge with constant current higher than maximum charge current allowed.
Do not disassemble or reconstruct the ba�ery.
Do not throw or cause impact.
Do not pierce a hole in the ba�ery with sharp objects, such as nail, knife, pencil, drill, etc.
Do not mixing with other ba�eries.
Do not solder on ba�ery directly.
Do not expose the ba�ery to high heat, such as fire, etc.
Do not put the ba�ery into a microwave or high-pressure container.
Do not use the ba�ery in reverse.
Do not connect posi�ve (+) and nega�ve (-) with conduc�ve materials, such as metal, cables, etc.
Do not immerge or wet ba�ery with water or sea water.
www.tempelgroup.com 19/19
lima@tempelgroup.com
+51 12 719445