Professional Documents
Culture Documents
Mechanical Seals - Mechanical Seals For Pumps - Pusher Seals
Mechanical Seals - Mechanical Seals For Pumps - Pusher Seals
Mechanical Seals - Mechanical Seals For Pumps - Pusher Seals
M2N
Mechanical seals | Mechanical seals for pumps | Pusher seals
Advantages Materials
• Economical seal solution Seal face: Carbon graphite resin
• No damage of the shaft by set screws impregnated (B)
• Short installation length possible (G16) Seat G9: Silicon carbide (Q1, Q2),
Special cast CrMo steel (S), Aluminium oxide
Operating range (V)
Shaft diameter:
d1 = 6 ... 38 mm (0.25" ... 1.5") Standards and approvals
Pressure: p1 = 10 bar (145 PSI) • EN 12756
Temperature:
t = -20 °C ... 140 °C Recommended applications
(-4 °F ... 355 °F) • Pulp and paper industry
Sliding velocity: • Water and waste water technology
vg = 15 m/s (50 ft/s) • Building services industry
Axial movement: ±1.0 mm • Water pumps
• Heating circulation pumps
Features
• For plain shafts
• Single seal
• Unbalanced
• Conical spring rotating
• Dependent on direction of rotation
eagleburgmann.com All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications, however, means that they can serve
info@eagleburgmann.com only as guide values.
We must be notified of the exact conditions of application before we can provide any
guarantee for a specific case. This is subject to change.
27.04.2022 © EagleBurgmann
1
RELY ON EXCELLENCE
eagleburgmann.com All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications, however, means that they can serve
info@eagleburgmann.com only as guide values.
We must be notified of the exact conditions of application before we can provide any
guarantee for a specific case. This is subject to change.
27.04.2022 © EagleBurgmann
2
RELY ON EXCELLENCE
Seat alternatives
G6 (EN 12756)
G4
eagleburgmann.com All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications, however, means that they can serve
info@eagleburgmann.com only as guide values.
We must be notified of the exact conditions of application before we can provide any
guarantee for a specific case. This is subject to change.
27.04.2022 © EagleBurgmann
3
RELY ON EXCELLENCE
Product variants
M2 M2N4
Rotating unit M2 with seat G4 or G16 (shorter Rotating unit M2 with seat G6.
installation length). Seal face:
Seal face: Carbon graphite resin impregnated (B)
Carbon graphite resin impregnated (B) Seat G6:
Seat G4: Silicon carbide (Q1), Special cast CrMo steel (S)
Silicon carbide (Q1), Special cast CrMo steel
(S)
Seat G16:
Silicon carbide (Q1, Q2), Special cast CrMo
steel (S), Aluminium oxide (V)
Dimensions
d1 d3 d6 d7 d8 d11 d12 db db l31) l5 l6 l7 l8 l10 l12 l14 l15 l16 l18 l19 l211) l28 b R
eagleburgmann.com All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications, however, means that they can serve
info@eagleburgmann.com only as guide values.
We must be notified of the exact conditions of application before we can provide any
guarantee for a specific case. This is subject to change.
27.04.2022 © EagleBurgmann
4