Professional Documents
Culture Documents
Options: Battery Cabinet
Options: Battery Cabinet
Options: Battery Cabinet
OPTIONS
This chapter supplies a brief introduction to all the options that are available for the 3
Phase UPS. Similar products from other manufacturer will not fit into th
Additionally, the installation of each option needs professional, trained personnel.
The bat tery cabinet is desi gned wit h the sam e size and prof ile as the UPS. Thi
done for convenience of installation, and for an aesthetically appealing display when
several cabinets of UPS and battery are aligned together. Also, structural strength is
enhanced to endure vibration, shock, etc. during transportation. See the figure below.
BATTERY CABINET
1
7.2. Emergency Power Off Switch (EPO)
An emergency power off (EPO) switch is available as an option, installed outside but
nearby the UPS, for stopping the UPS output in case of emergency, such as electrical
shock, burning of the load or any emergency conditions where one wants to stop the
AC output immediately. When the EPO switch button is
immediately stops running, but the static switch rema
Therefore there will be no AC supply at the output. This shutdown condition will be
latched until it is manually reset by pressing the OFF () switch and inverter control
switch () simultaneously.
T h e r e f o r e , p l e a s e f i r s t s w i t c h o ff I N V E RT E R ( p u s h r i g h t & m i d d
s w i t c h s i m u l t a n e o u s l y ) a n d t h e n o n I N V E RT E R a g a i n ( l e f t & m i d d l e
switch simultaneously) to restart the UPS after the EPO is triggered.
UPSCAN can monitor 1 to 99 units of UPSs with DB9 connections in series from
distance of up to 1000M.
2
7.4. Software for PC Monitoring – UPSCOM
U P S C OMi s a h a r d w a r e / s o f t w a r e c o m b i n a t i o n i n s t a l l e d o n
m ul t i pl e UP S s wi t h DB 9 connect i on i n se ri es . T he connect or on t he UPS’s s i d
R S - 4 8 5 ( f o r l o n g d i s t a n c e t r a n s m i s s i o n ) ; t h e r e f o r
e aRnS R
- 2S3-24 8a5d a p t e r
(hardware) is required to modify the signal. The software and hardware together form
a p a c k a g e c a l l e . d U S eP eS Ct hO eM U PT SM C s pO eMc i f i c a t i o n f o r
information.