Professional Documents
Culture Documents
SpecialChem - Matting Agents For Paint, Coatings and Inks
SpecialChem - Matting Agents For Paint, Coatings and Inks
SpecialChem - Matting Agents For Paint, Coatings and Inks
Coatings Ingredients
Home
Selection Guides
Matting Agents for Paint, Coatings and Inks
Share
In many coating applications, there is a preference in the market for matte finishes. Different methods and matting agents
exist for indoor and outdoor coatings. Get detailed information about the various types of matting agents used in coatings
and inks and how to disperse a matting agent. Find out more about various methods to achieve a matted paint surface,
what are the main factors which influence matt effect and quick overview of popular applications.
O v e r v ie w
What is Matting Effect?
W h a t i s M a t t i n g E ff e c t ?
In our everyday life, we encounter many matt surfaces: at home, automobile finishes, on the way to work, or at night in restaurants. In
How to Achieve a our homes, most of the furniture has
a matt appearance and when wood panels cover the sealing in a restaurant; they are more or less
Matted Paint Surface? matt.
M a i n Ty p e s o f M a t t i n g
Agents
The choice between gloss or matt is not only influenced by factors relating to fashion and appearance; but
practical issues influence
our decision too, such as:
How to Disperse a
Matting Agent? Clean-ability
Surface sensitivity, and
Parameters Influencing
t h e M a t t E ff e c t
Haptic qualities
Economic efficiency is another important consideration when choosing between a glossy or matted surface. For example, in some
coated applications, scratches, craters and impurities on the substrate are not easy to recognize after applying matted coatings,
Ke y Ap p lica t io n s whereas this is not the case with glossy surfaces.
Like color, both matting and gloss are subjective impressions that are identified by our senses. Light is reflected from an even surface
Su p p lie r s into our eyes and we categorize it according to its gloss. Strictly speaking, only part of the light falling upon a surface is directly
reflected, the rest passes into the paint film and is
internally scattered and absorbed by pigments and the substrate. (Dark yellow)
Br a n d s
Mirrors, for example, are recognized as high gloss surfaces as they reflect light with high clarity. In contrast, when micro-rough paint
films scatter light, only a reduced amount of light is reflected. In this instance, a yellow matt covering appears.
The conditions to obtain a perfectly matted effect are to scatter the incoming light. This means diffracting the directed light that
illuminates the substrate. Otherwise, a substrate that would perfectly transmit the light would produce a gloss aspect.
Back to Top
The micro-roughness of the paint film surface is the reason why the light is scattered in a way that results in a matted surface.
Nowadays, there is a wide range of objects produced with matted surfaces. Although some are complicated in construction, they are
quickly manufactured. Additives based on
silicas, waxes, organic materials and even fillers are added to the paint, to form a
micro-
rough surface after the drying process.
The evaporation of solvents causes the matting additives to be distributed throughout the whole film, making the paint film thinner.
This shrinkage is the main reason for creating a micro rough surface, or,
in other words, a matted paint film
The pictures explain why paints with high VOC content are easier to matt as systems with high solid contents. We can state: the higher
the resin solid content of paints, the more difficult it is to produce matted surfaces. UV or EB systems show nearly no shrinkage, this is
the reason why such systems are so difficult to matt.
In the broad field of obtainable silicas for matting there are two groups which differ in terms of their production process.
One is the hydro-thermal process, which produces silicas with a relatively soft morphology
By using the silica-gel process products can be obtained which have a harder morphology
Both processes can produce standard silica and after treated products. After treatment means that the silica surface can be partially
modified with organic (waxes) or inorganic materials.
Compared to silica-gel matting agents, modified silica possesses a different particle size, particle size distribution, in the pore volume.
Hydrothermal matting agents are different in particle size and distribution. We can also find untreated and treated materials.
Currently there is only one product popular for specific application, which is produced according to pyrogenic process, and shows a very
high matting efficiency, especially in water-based systems.
Synthetic Aluminum silicates are applied in emulsion paints primarily as a high-quality extender to partly replace the titanium dioxide.
However, they may also be used to impart an evenly balanced matting effect into the dried emulsion paint. In long oil Alkyd systems,
they work as a matting agent, but must be dispersed with pigment and fillers. Matting silicas are used in all-coating systems, though not
in powder coatings.
In paints, coatings and inks, waxes based on Polyethylene, Polypropylene, Carnauba, and Amide are mostly used. Waxes products
based on Polytetrafluorethylene (PTFE) are also used as matting agents.
In contrast to silicas, waxes modify the surface properties of a paint film by floating to the top of the surface. This phenomenon affects
the following properties:
Most of the products are delivered as micronized products, which are available in a wide range of concentrates that are based on wax
emulsions. Dispersions differ according to particle size and particle size distribution.
Although the appearance of paints changes through the addition of previously mentioned matting additives, the performance is not
affected. By using specific fillers, we clearly increase the Pigment-Volume-Concentration of paint involving with all the side effects it
implies. That's the reason why this method of matting is limited for only pigmented, economical lower classes paint systems.
The fillers with preferential narrow particle size distribution must disperse together with the pigments. To adjust a required gloss degree,
it is praxis to adjust it by using stir in Silica at the end of the paint production process.
Organic Materials as Matting Agents - With modern grinding techniques it is possible to grind plastic material based mainly upon Poly
methyl urea resin. Such products have a low influence on viscosity, they show temperature stability up to 200°C, they have good solvent
resistivity, and they are easy to disperse.
About the second group, handing is not difficult. It is a matter of dispersing a sufficient quantity of the agent in combination with
pigments and fillers using the right equipment (high speed dissolver, pearl mill, etc.).
The dispersion of stir in matting agents based on silicas, waxes or organic products can be done in three different ways:
Positive: Very easy handling of the concentrates, and also, that they can be incorporated using stirrers at a low agitation speed
Negatives:
Firstly, the matting agent content of the concentrates are usually not high, and
Secondly, the stability of the matting-pastes can be reduced during storage due to evaporation of the solvents from the
concentrate surface. This causes a build-up of semi-dry lumps, which are difficult to disperse in the final paint.
Finally, if the paste contains resin it cannot be used universally.
Incorporation during the production process of the paints is a common method way of adding matting agents. Fluffy products should be
incorporated in a low viscosity binder solution, via a stirrer or dissolver.
Most matting agents are designed for an easy dispersion process. For example, dispersing with a pearl mill will result in a greater
reduction of the particle size, which leads to a higher level of gloss, and therefore higher dosing of matting agents are necessary to
adjust the required matt degree.
At the End of the Paint Production Process to Adjust the Matt Degree According the User’s Request
Back to Top
To adjust the final matt degree through the incorporation of matting agents, it requires stir in products which can be easily dispersed
using a simple stirrer. It is necessary, however, to ensure that there is enough space in the vessel so that the matting agent can be
poured on the top and the vessel can be closed in order to avoid dust.
When we use fillers as matting agents it is advisable to measure Grindometer or Hegmann value in order to receive information about
the dispersing degree. Second, we can control the gloss degree at an angle of 60°.
For the other above-mentioned product groups, the main parameter should be the control of gloss behavior. However, to get an
extensive understanding about the matt degree of the paint it is necessary to take measurements at angles of 60° and 85°. Sometimes
here Grindometer values can be determined, too.
As long as there is no rule that is comparable with common paint systems, it is to accept. Values higher than 25 microns are usual e.g.
by using
silica-matting agents. If we reduce this Grindometer value, we will also reduce the matt effect and increase the gloss. Viscosity
and transparency (for clear, sensitive applications) should be compared to a standard.
Graphs below demonstrate the influence of the average particle size and concentration of a matting agent on the gloss effect.
The higher the matting agent dosing in a coating, the stronger the matting effect.
The matting power of matting additives depends on their chemical, morphological, and physical properties.
Matting agents with smaller average particle size do not give a quality matting effect, but they produce smooth paint films
In contrast, products with larger particle sizes are stronger in matting efficiency but the paint film surface is not so smooth. Matting
agents with large particles show a tendency to build up separation and sedimentation in clear paint systems during storing time
Untreated silicas and fillers, in particular, need to be combined with anti-settling agent or fine particle size waxes to avoid these
phenomena. Fine particle size waxes and easy to disperse hydrophobic pyrogenic silicas are recommendable, as they have a similar
refractive index to these additives.
It is of prime importance to select an application that has little influence on transparency, and to choose a resin and matting agent which
have similar 'refractometers', as this also improves the transparency of the system. The amount of matting agent added to the paint film
also impacts upon transparency.
More efficient matting agents require lower dosing levels and therefore provide better transparency
Paint System
The images below demonstrate the difference in matting effect in different paint systems with 10% matting agent base on Silica and the
influence of different application processes on the matting effect
Sometimes paints are dried under different conditions, e.g. during week forced before weekend just air-drying. Different matt degree is
the result. One can increase the same gloss effect by applying several layers of the same paint film. The graphics below demonstrate
these effects.
Back to Top
Product Name Supplier Description
Omyamatt® 100 Omya Omyamatt® 100 by Omya acts as a matting agent for emulsion paints. It is
modified calcium carbonate and has very low crystalline silica content for safe
and healthy product handling. It has a highly...
view more
Celite® 281 Imerys Celite® 281 by Imerys is a flux calcined diatomite. It acts as an effective matting
agent in water & solvent-based architectural paints and coatings for interior &
exterior applications. In thick...
view more
Leave a comment
Ichsan Logout
This was a very good article. It would be interesting to know what category of matting agent has the best weatherability / retention of consistent gloss upon
exposure to sunlight and weather. In Automotive, the edges of the car tend to shine up and sunlight also will change the gloss reading.
Back to Top
Product Datasheet Recently Added Product News Recently Added Online Course Recently Added