Professional Documents
Culture Documents
MMPC 6000
MMPC 6000
Model: V-C2 Modified Article: Transfer Roller From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 30-Jan-08
To meet standards ( )
Description
Transfer Roller
Qty
1 1
Int
O/O O/O
Modification Bulletin
Model: V-C2 Modified Article: Side Fence: Rear: Ass'y From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 8-Feb-08
To meet standards ( )
Description
Side Fence: Rear: Assy
Qty
1
Int
O/O
Modification Bulletin
Model: V-C2 Modified Article: Fusing Unit Cover From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 8-Feb-08
To meet standards ( )
Description
Fusing Unit Cover
Qty
1
Int
X/O
Change: The shape of this part was changed. Reason: To make it easier to attach and remove in the field.
Modification Bulletin
Model: V-C2 Modified Article: Seal: Duct From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 8-Feb-08
To meet standards ( )
Description
Drum Stay Unit Seal: Duct: Door: Front: long Seal: Duct: Door: Front: short
Qty
1 1 2
Int
X/O X/O X/O
Change: The shapes of these parts were changed. Reason: To further ensure that toner is properly sealed in and does not leak.
Modification Bulletin
Model: V-C2 Modified Article: Toner Supply Unit: Drive From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 8-Feb-08
To meet standards ( )
Description
Toner Supply Unit Toner Supply Unit: Drive
Qty
1 4
Int
X/O X/O
Change: The material of the seals was changed. Reason: To further ensure that toner does not leak between the toner supply unit and PCU.
Modification Bulletin
Model: V-C2 Modified Article: Joint PCU From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 12-Feb-08
To meet standards ( )
Description
Joint PCU
Qty
4
Int
X/O
Change: The shape of this part was changed. Reason: To further ensure that toner does not leak.
Modification Bulletin
Reissued: 26-Nov-08 Model: V-C2 RTB Reissue The items in bold italics were corrected. Modified Article: PCU: Assy From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 12-Feb-08
To meet standards ( )
Description
Qty Int
1 3
Old
Page 87 87 Index * *
New
Page 91 91 Index
Note
* *
D0143047 PCU: K: Exp: Assy D0143046 PCU: FC: Exp: New: Assy
Change/Reason: MB correction.
Modification Bulletin
Model: V-C2 Modified Article: Rail: Right: Ass'y From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 14-Feb-08
To meet standards ( )
Description
Rail: Right: Assy
Qty
1
Int
O/O
Change: The shape of this part was changed. Reason: To make the duplex unit slide out of the machine more smoothly.
Modification Bulletin
Reissued: 27-Feb-08 Model: V-C2 MB Reissue (MB Cancellation) Modified Article: Drum: Stay: Unit From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 14-Feb-08
To meet standards ( )
MB Cancellation: MD014009 has been cancelled, because it was issued by mistake (the same information was already announced in MD014004.
Modification Bulletin
Model: V-C2 RTB Reissue The items in bold italics were corrected. Modified Article: Fusing Unit Cover From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 21-Feb-08
To meet standards ( )
Modification Bulletin
Model: V-C2 Modified Article: Conductive Grease From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 18-Feb-08
Description
Grease-KS660B
Qty
0-1
Int
-
Change: The part numbers in the table has been newly added. Reason: To improve the reliability.
Modification Bulletin
Reissued: 3-Dec-08 Model: V-C2 MB Reissue The items in bold italics were corrected or added. Modified Article: Operation Panel From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 26-Feb-08
To meet standards ( )
Qty
1 1 1 1 1 1
Page
23 23 23 23 23 23
Index
34 34 35 35 36 36
Note
Change: These parts were added as service parts. Reason: To meet a request from the field.
32 INF 28 33 30 29 34 35 31
26 24 25 22
27
23 17 20 102 11 10 8 20 101 104 14 13 102 102 15 102 101 101 16 102 101 2 7 3 4 1 5 9 6
18 19
12
36
Modification Bulletin
Model: V-C2 Modified Article: Spacer From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 27-Feb-08
To meet standards ( )
Qty
1
Page
117
Index
26
Note
Change: This part was added. Reason: To increase the durability of the retaining ring.
4 3 2 1 2 106 109
101 101
106
5 106 106 109 6 11 10 101 9 101 102 101 106 13 111 101 112 105 8 105 107 22 18 19 110 103 20 101 16 103 17 104 23 12 14 26 106 108 15 25 103
107
17
24
102
Modification Bulletin
Model: Model V-C2 Modified Article: Transfer Belt Cleaning 2 From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 13-May-08
Call-out numbers on page 100 of the parts catalog were missing. Please correct your parts catalog as follows.
Modification Bulletin
Model: Model V-C2 Modified Article: PCU From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 23-May-08
Please correct your parts catalog on page 87 as follows. Correct information: 35. PCU 2 (D014/D015) Index No. Part No. * * D0143047 D0143049 Description PCU:K:Exp:Assy PCU: FC:Exp:Assy Q'ty per Assembly 1 3
Modification Bulletin
Model: Model V-C2 Modified Article: PICK-OFF PAWL:PRESSURE ROLLER From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 23-May-08
Please correct your parts catalog on page 124-125 as follows. 54. Fusing Unit 6 (D014/D015) Old part New part number number
D0144255 AE044064 B1324196 B1324265 B1324268 PICK-OFF ROLLER
Description
PAWL: PRESSURE
Qty
7-7 0-7 0-7 0-7
Int.
O/O See Note -
16 7 15
17
Modification Bulletin
Model: V-C2 Modified Article: Hot Roller From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 29-May-08
To meet standards ( )
Description
Qty
1
Int
O/O
Modification Bulletin
Reissued: 15-Jul-08 Model: V-C2 Date: 29-May-08 RTB Reissue The items in bold italics were corrected and added. Modified Article: Roller Intermediate Transfer From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
To meet standards ( )
Description
Roller Intermediate Transfer
Qty
4
Int
X/O
Change: Diameter tolerance grade has been increased. Reason: To improve the banding image in halftone areas.
Modification Bulletin
Model: V-C2 Modified Article: ARDF From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 5-Jun-08
To meet standards ( )
Description
ORIGINAL TABLE:FACE FRONT
Qty
1
Int
O/O
Page
27
Index Note
32
Modification Bulletin
Model: Model V-C2 Modified Article: PCU Holder From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 6-Jun-08
Please correct your parts catalog on page 18.-19.as follows. Correct information: 1. Exterior 1 (D014/D015) Index No. Part No. 15 38 16 D0143690 D0143135 D0143144 Description Q'ty per Assembly 1 1 1
15
38 16
Modification Bulletin
Model: Model V-C2 Modified Article: Fusing Unit From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 10-Jun-08
Modification Bulletin
Model: V-C2 Modified Article: Guide Plate: Fusing Exit From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 13-Jun-08
To meet standards ( )
Description
Guide Plate: Fusing Exit Guide: Fusing Exit: Middle
Qty
1 1
Int
X/X X/X
Change: The shapes of these parts were changed. Reason: To further improve paper feed reliability. Note: The interchangeability of the new parts as a set is O/O.
10
101 7 102 11
102 13 9 14
12
Modification Bulletin
Model: V-C2 Date: 13-Jun-08
Modification Bulletin
Model: V-C1/C2 Modified Article: ARDF From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 23-Jun-08
To meet standards ( )
14. ARDF Drive & Electrical 2 (B132/B181/B200) Old part New part Description number number
B6525502 B6525505 PCB:MAIN CONTROL:ASS'Y
Qty
1
Int
X/O
Page
43
Index Note
8
See related MB#MB132006 15. ARDF Drive & Electrical 2 (D014/D015) Old part New part Description number number
B6525504 B6525505 PCB:MAIN CONTROL:ASS'Y
Qty
1
Int
X/O
Page
45
Index Note
8
Modification Bulletin
Model: Model V-C2 Modified Article: Branding Decal From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 5-Aug-08
Please add following parts to your parts catalog on page 19. 1. EXTERIOR 1 (D014/D015)
New part number D0141532 D0141533 D0141534 D0141535 D0141537 D0141538 D0141539 D0151532 D0151533 D0151534 D0151535 D0151537 D0151538 D0151539 Description SHEET:LOGO:AFICIO:C6000 SHEET:LOGO:GES:NA:C6000 SHEET:LOGO:LAN:NA:LD260C SHEET:LOGO:SVN:C6055 SHEET:LOGO:NSA:C6000 SHEET:LOGO:REX:C6000 SHEET:LOGO:GES:EU:C6000 SHEET:LOGO:AFICIO:C7500 SHEET:LOGO:GES:NA:C7500 SHEET:LOGO:LAN:NA:LD275C SHEET:LOGO:SVN:C7570 SHEET:LOGO:NSA:C7500 SHEET:LOGO:REX:C7500 SHEET:LOGO:GES:EU:C7500 Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Page 19 19 19 19 19 19 19 19 19 19 19 19 19 19 Index 20 20 20 20 20 20 20 20 20 20 20 20 20 20 With Aficio logo (EU only) Without Aficio logo(NA only) With Aficio logo (EU only) Note Without Aficio logo(NA only)
Modification Bulletin
Model: V-C2 Modified Article: PCU: FC Assy From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 19-Aug-08
To meet standards ( )
Description
PCU: FC: Exp: New: Assy
Qty
3-3
Int
O/O
Modification Bulletin
Model: V-C2 Modified Article: PCB: IPU From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 19-Aug-08
To meet standards ( )
Description
Qty
1
Int
O/O
Modification Bulletin
Reissued: 26-Aug-08 Model: Model V-C2 MB Reissue The items in bold italics were corrected or added. Modified Article: Washer From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 19-Aug-08
Please correct your parts catalog on page 131.as follows. Correct information: 57. Paper Exit 2 (D014/D015) Index No. Part No. 4 5 5937 4158 B1327165 Description Q'ty per Assembly 1 1
Modification Bulletin
Model: Model V-C2 Modified Article: Decal on operation panel From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 19-Aug-08
Please correct your parts catalog on page 19 as follows. Correct information: 1. Exterior 1 (D014/D015) Index No. Part No. 37 B2371544 Description SHEET:DATA:DISPLAY:PLAIN Q'ty per Assembly 1
Modification Bulletin
Model: Model V-C2 Modified Article: Fusing Unit From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Other
Date: 22-Aug-08
Please correct your parts catalog on page 119.as follows. Correct information: 51. Fusing Unit 3 (D014/D015) Index No. Part No. * * D0144018 D0144028 Description Q'ty per Assembly 1 1
Fusing Unit for 120V model Fusing Unit for 208-240V model
NOTE 1 NOTE 2
NOTE 1: for D014-17 NOTE 2: for D014-26, 27, 66, 67 AND D015-17, 26, 27, 66, 67
Modification Bulletin
Model: V-C2 Modified Article: PCB: Control Board EX1 From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 22-Aug-08
To meet standards ( )
78. Electrical Section 6 (D014/D015) Old part New part Description number number
D0145711 D0145731 PCB: Control Board Ex1
Qty
1
Int
X/O
Modification Bulletin
Model: V-C2 Modified Article: PCU: SHIELD:CASE SEAL From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 8-Sep-08
To meet standards ( )
Description
SHIELD:CASE:REAR:COLOR SHIELD:CASE:REAR:K
Qty
3 1
Int
X/O X/O
NOTE:
D0142457 is only for the C, M, Y-PCU D0142460 is only for the K PCU
Parts location:
D0142457
D0142460
Modification Bulletin
Model: V-C2 Modified Article: ARDF Motors From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 3-Nov-08
To meet standards ( )
Description
GEAR:Z47:M0.8 TIMING PULLEY:T30/Z20:S2M/M0.8 GEAR:Z20/Z47:M0.8:LEFT:REAR GEAR:Z20/Z47:M0.8:RIGHT:FRONT GEAR:Z20/Z47:M0.8:RIGHT:REAR
Qty
1-1 1-1 2-2 1-1 1-1
Int
X/O X/O X/O X/O X/O
Modification Bulletin
Reissued: 12-Nov-08 Model: V-C2 MB Reissue The items in bold italics were corrected or added. Modified Article: TONER SUPPLY UNIT:ASS'Y From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 10-Nov-08
To meet standards ( )
Description
TONER SUPPLY UNIT:ASS'Y
Qty
4
Int
O/O
Modification Bulletin
Model: V-C2 Date: 12-Nov-08 Modified Article: TONER SUPPLY UNIT:VENUS-C2:ASS'Y Prepared by: T.Toriumi From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
To meet standards ( )
Description
TONER SUPPLY UNIT:VENUS-C2:ASS'Y
Qt y
1
Int
O/O
Page
79
Index Note
1
Modification Bulletin
Model: V-C2 Modified Article: Paper Exit From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 12-Nov-08
To meet standards ( )
Description
SPRING:GUIDE PLATE:OPEN AND CLOSE SPRING:TIGHTENER
Qty
1-1 1-1
Int
-
Modification Bulletin
Reissued: 17-Nov-08 Model: V-C2 MB Reissue The items in bold italics were corrected or added. Modified Article: PCU: SHIELD:CASE SEAL From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 8-Sep-08
To meet standards ( )
Description
SHIELD:CASE:REAR:COLOR SHIELD:CASE:REAR:K DRUM STAY:BRUSH ROLLER: COLOR:ASS'Y DRUM STAY:BRUSH ROLLER: K:ASS'Y
Qty
3 1 3 1
Int
X/O X/O X/O X/O
NOTE:
D0142457 is only for C, M, Y-PCU D0142460 is only for K PCU D0142461 is only for the C, M, Y-PCU D0142463 is only for the K PCU
Modification Bulletin
Reissued: 17-Nov-08 Model: V-C2 Parts location:
D0142457
Date: 8-Sep-08
D0142460
Modification Bulletin
Model: V-C2 Modified Article: Toner Supply From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 19-Nov-08
To meet standards ( )
Description
Toner Supply Unit Toner Supply Unit - Drive
Qty
1-1 4-4
Int
O/O O/O
Modification Bulletin
Model: V-C2 Modified Article: PCB: Control Board: Ex1 From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 3-Dec-08
To meet standards ( )
78. Electrical Section 6 (D014/D015) Old part New part Description number number
D0145731 D0145738 PCB: Control Board: Ex1
Qty
1
Int
X/O
Modification Bulletin
Model: V-C2 Modified Article: Roller Intermediate Transfer From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 3-Dec-08
To meet standards ( )
Description
TONER SUPPLY UNIT:VENUS-C2:ASS'Y
Qt y
1
Int
O/O
Page
79
Index Not e
1
Modification Bulletin
Reissued:26-Jan-09 Model: V-C2 MB Reissue The items in bold italics were corrected or added. Modified Article: PCB:CONTROL BOARD:EX1 From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 8-Dec-08
To meet standards ( )
78. Electrical Section 6 (D014/D015) Old part New part Description number number
D0145731 D0145738 PCB:CONTROL BOARD:EX1
Qty
1
Int
X/O
MB Cancellation This MB #MD014036 has been cancelled, as it contains the same information as MB #MD014034.
Modification Bulletin
Model: V-C2 Modified Article: Bracket: Remove Paper Dust From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 16-Dec-08
To meet standards ( )
Description
Bracket: Remove Paper Dust
Qty
1
Int
X/O
Modification Bulletin
Model: V-C2 Modified Article: Control Board From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 19-Dec-08
To meet standards ( )
Description
IC - SN74AHCT1G08DCK CMOS Logic SN74LVC2G04DCK IC:SN74LVC1G04DCK IC - SN74LVC2G17DCK IC SN74lVC2G125DCU CMOS Logic SN74LVC1G125DCK CMOS Logic SN74LVC2G07DCK CMOS Logic SN74LVC1G06DCK CMOS Logic SN74AHCT1G04DCK CMOS Logic SN74AHC1G04DCK CMOS Logic SN74LVC1G32DCK
Qt y
-
Int
O/O O/O O/O O/O O/O O/O O/O O/O O/O O/O O/O
Modification Bulletin
Model: V-C2 Modified Article: Decal: Misfeed Removal From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 13-Jan-09
To meet standards ( )
Description
Decal: Misfeed Removal Decal: Misfeed Removal
Qty
1 1
Int
X/O X/O
Modification Bulletin
Model: Model V-C2 Modified Article: CMOS Logic From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 26-Jan-09
To meet standards ( )
Description
CMOS Logic SN74LVC1G125DCK
Qty
-
Int
O/O
Modification Bulletin
Model: Model V-C2 Modified Article: HINGE: DOOR: LOWER From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 28-Jan-09
To meet standards ( )
Description
Hinge: Door: Lower: Ass'y
Qty
1-1
Int
X/O
Modification Bulletin
Reissued:13-Feb-09 Model: Model V-C2 MB Reissue The items in bold italics were corrected or added. Modified Article: Guide: Paper Feed: Upper From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 10-Feb-09
To meet standards ( )
Description
Qty
1-1
Int
X/O
Modification Bulletin
Model: Model V-C2 Modified Article: ADF Unit From: 2nd Tech. Support Sec. Service Support Dept. Reason for Modification:
Parts catalog correction To facilitate assembly Part standardization Vendor change To improve reliability Product Safety Other
Date: 24-Feb-09
To meet standards ( )
Description
Qty
1-1
Int
X/O
ADF Unit
X/O
X/O
A A A
Model V-C2 Model V-C2 Model V-C2 Model V-C2 Model V-C2 Model V-C2
GRIP:RELEASE:DUPLEX UNIT:ASS'Y GRIP:RELEASE:DUPLEX UNIT:ASS'Y BALL BEARING - 8X16X5 BALL BEARING - 8X16X5 DECURA:HEAT PIPE:DIA15 DECURA:HEAT PIPE:DIA15
1 1 2 2 1 1
1 1 2 2 1 1
4 4 103 103 14 14