Professional Documents
Culture Documents
Mazak Matrix Automatic NC Backup Procedure
Mazak Matrix Automatic NC Backup Procedure
Auto NC backup
USA-E00091-033*
USA
List of Revisions
Purpose:
New Matrix s/w improvements: Automatic NC back up
Overview:
To restore data promptly when NC or a hard disk is broken down, NC saves data
like paramerters and programs anytime you prefer.
It is also possible to save the data which custoers do not change like the machine model data
(MAKER BACKUP) and restore backup data (RESTORE) by serviceman in 1131 mode.
Tools Needed:
Latest Main s/w version as of 05/08
Instructions:
See next page
In case that you cannot access the selected drive, "ALARM1453 BACKUP IMCOMPLETE" occurs.
EX.) If the CF card is not inserted when executing backup, the alarm occurs.
In this case please insert the CF card.
Appendix:
Address Description
F166 Bit7
Automatic NC backup
0 : Invalid
1 : Valid
Note >
1. We can backup the programs in STANDARD PROGRAM area, but cannot backup
in HDD OPERATION and BACKUP PROGRAM area.
2. It is impossible to change parameter settings, and edit programs in BACKUP operation.
If we do, alarm #1453 "MEMORY PROTECT" is generated, but backup operation
is continued.
3. In BACKUP operation, if we put menu "NC DATA BACKUP" off, the operation ends
and the saving data is deleted.
4. Please do not run programs in BACKUP operation to machine work pieces correctly,
and finish BACKUP operation completely.
5. If we change screens in BACKUP operation, the process window is remained.
6. The process window shows "-- %", it is determined by not time but the numbers
of files (data). So process can be varied.