Professional Documents
Culture Documents
SP Lab Experiment No. 6 Date: 09/05/2022 Name: Ankush Mahapatra Class: TY ET-C Roll No.: 13
SP Lab Experiment No. 6 Date: 09/05/2022 Name: Ankush Mahapatra Class: TY ET-C Roll No.: 13
SP Lab Experiment No. 6 Date: 09/05/2022 Name: Ankush Mahapatra Class: TY ET-C Roll No.: 13
6
Date: 09/05/2022
Name: Ankush
Mahapatra
Class: TY ET-C
Roll No.: 13
Problem Statement:
Design a digital lowpass Butterworth filter using Bilinear
transformation method to meet the following specifications:
Theory:
The bilinear transformation is a mapping that transforms jΩ axis into
the unit circle in the z- plane only once, thus avoiding aliasing of
frequency components.
All the points in the LHP of ‘s’ are mapped inside the unit circle in
the z-plane and all points in the RHP of ‘s’ are mapped into
corresponding points outside the unit circle in the z-plane.
Filters:
The most common technique used for designing IIR digital filters
involves first designing an analog prototype filter and then
transforming the prototype to a digital filter. A Butterworth Filter is a
type of Active Filter, where the frequency response of the across its
pass band is relatively flat.
Conclusion:
Thus, a digital low pass Butterworth filter using bilinear
transformation with the given parameters is designed successfully
using MATLAB’s filter design tool. The pole zero plot, the magnitude
response and phase response are plotted using the same tool. The
order of designed filter is 6.
Code:
Filter Design Tool
Result:
Plots:
Pole – Zero Plot