Professional Documents
Culture Documents
JS Welding Catalogue en 2013
JS Welding Catalogue en 2013
2 Visit www.kcprofessional.co.uk
EUROPEAN LEGISLATION
Personal protection during welding related activities requires the combination of a number of PPE
devices, all of them working together to deliver a high level of protection for the tasks.
The testing and classification of eye protection is achieved through compliance with the
requirements established in EN 166 for protective lenses and visors, while for welding filters, the
applicable standards are EN 169 for passive filters and EN 379 for Automatic Darkening Filters (ADFs).
Effective Welding PPE solutions combine the optical protection offered by the welding filter against
harmful intense light from the welding arch (in particular in the form of IR and UV light), with the
mechanical strength protection that comes from the protective lenses and visors against flying
particles generated during welding related activities.
Integral protection of the face is completed with a barrier against mechanical hazards (i.e. flying
particles) provided by the interaction of face shields and protective lenses (regulated by EN 166) and
welding shields (required to comply with the requirements under EN 175) to deliver a welding PPE
solution. The following classification applies:
Assisted respiratory devices, in particular Power Assisted Purifying Respirators (PAPRs) that offer
protection against airborne solid and liquid particles, may work in certain cases in combination with
filters against a range of gases and/or vapours. PAPRs systems are classified according to tested total
inward leakage (among other requirements indicated in EN 12941), being TH1 for a maximum 10%,
TH2 for a maximum of 2% and the highest performance TH3 for a maximum of 0.2%.
Hard hats, which deliver head protection (among other requirements indicated in EN 397) and
integrated with welding and face shields and PAPR systems, provide multiple combined protection
against multiple hazards encountered in certain work areas.
Limitations of use:
The selection and use of a JACKSON SAFETY* welding filter, helmet, hard hat, PAPR system and any
related spare part used to keep the PPE operational must be based on a hazard assessment of the
wearer’s environment. This must be carried out by an appropriately trained individual for the relevant
employer or organization.
Speak to our sales professionals to find the best helmet and ADF solution for you 3
ADFs & PASSIVE FILTERS
Welding filters constitute the key building block of eye protection against the multiple hazards
encountered during welding related tasks. KIMBERLY-CLARK PROFESSIONAL* offers a wide range of
welding filters: passive filters made of Mineral Glass (MG), fixed Automatic Darkening Filters (ADFs)
and variable ADFs that cover the most demanding welding, grinding and torch cutting applications
for all levels of professional expertise.
4 Visit www.kcprofessional.co.uk
WF30 Basic Variable Shade Automatic Darkening Filters
WF30 variable shade ADFs are offered in a typical range of dark shades for the professional welder to enjoy the protection
and productivity benefits of two automatic darkening technologies. WF30 ADFs are provided with a 1.5 year manufacturer
warranty (see conditions on the back cover).
WF30 4/9 - 13 EXT ADF
J8189 • Standard 90 x 110mm cartridge size and a 98 x 40mm viewing area
• Powered by a combination of a solar cell and an internal Li-ion battery. Fitted with two
sensors and adjustable sensitivity (high-low)
• True colour definition for a clear state shade 4 and an externally controlled dark shade range
from 9 to 13
• Replacement inner lens: J8329 PLASTIC PROTECTIVE LENS 94 x 45mm
• Replacement lens retainer: J8344 WELDING LENS RETAINER VARIABLE ADF
Speak to your local sales representative to learn more about the technology in our ADFs 5
POWERED AIR PURIFYING
RESPIRATOR (PAPR) SYSTEMS
Airborne hazards contain solid and liquid particles from welding fumes and dust that may require
additional respiratory protection during welding related activities. KIMBERLY-CLARK PROFESSIONAL*
offers a range of Powered Air Purifying Respiratory (PAPR) systems for extended protection at high
levels of comfort for the wearer. PAPR head tops are available in the following product families:
The R60 AIRMAX* blower unit is sold separately so that you can choose the PAPR head top that best
suits your needs. The blower unit is supplied with a hose fitted with an exclusive bayonet coupling to
ensure a reliable connection to the selected JACKSON SAFETY* head top.
2
3
6 Visit www.kcprofessional.co.uk
WELDING HELMETS
JACKSON SAFETY* welding helmets, in combination with an appropriate welding filter, constitute
a complete PPE solution for protection to eyes, face and head against the multiple hazards
encountered during welding related tasks. KIMBERLY‑CLARK PROFESSIONAL* offers a wide range of
welding helmets to cover the most demanding welding, grinding and torch cutting applications for all
levels of professional expertise. JACKSON SAFETY* branded welding helmets are logically classified
by performance level for easier selection. They are available in a selection of ready-to-use solutions
or sold separately for the user to make an informed choice from a range of components available for
each product family.
All JACKSON SAFETY* branded helmets are CE marked and they comply with the European
requirements according to the EU Directive 89/686/EEC for PPE. The following EN standards are
applicable: DIN EN 175:1997‑08, DIN EN 166:2002-04; DIN EN 169:2003-02 (for selected helmets
provided with a mineral glass) and DIN EN 379:2009‑07 (for selected helmets provided with an ADF)
A range of spare parts for consumable components is available per product family for the user to
prolong the life of the welding helmet under optimum performance conditions. JACKSON SAFETY*
branded welding helmets are provided with a 1.5 year manufacturer warranty (see conditions on the
back cover).
1
EXT: External
INT: Internal
Want to know more? Call your local sales representative today for more information 7
WH10 FLIP-UP
WELDING HELMETS
2
3
Want to know more? Call your local sales representative today for more information 9
WH30 ALBATROSS WELDING HELMETS
AND PAPR HEAD TOPS
J5032
12 6 8
1 J8352 WH30 Albatross Welding Flip-Up Kit1
2 J8353 WH30 Albatross Visor
3 J8354 Plastic Protective Lens 107 x 87mm
4
4 J8355 Albatross Welding Hard Hat Adaptor (Right and Left)
5 J8181 WF20 3/10 INT TN ADF
5 J8183 WF20 3/11 INT TN ADF
5 J8188 WF20 3/11 INT TN ADF
9
5 J8142 WF30 4/9-12 INT SM ADF
7
5 J8162 WF40 4/9-12 INT SM ADF
10
5 J8187 WF40 4/9-13 INT TN ADF 11
6 J8333 Welding Head Gear Pro Black (J5032, J5035)
7 J8330 Welding Sweat Band Black (J5032, J5035) 11
8 J5260 PAPR Welding Head Gear (J5033, J5036)
9 J5462 PAPR Welding Sweat Band (J5033, J5036)
10 J5274 PAPR WH30 Face Seal Kit for Hard Hat (J5037) 2
10 J5251 PAPR Visor Face Seal (J5033, J5036)
11 J5275 PAPR WH30 Air Kit for Hard Hat2
12 J8500 Hard Hat Red 3
J8346 Lens Retainer for Passive Filter (not shown) 5
J8344 Lens Retainer TN Variable ADF (not shown)
J8304 Inner Protective Lens 90 x 110mm (J5032, J5033) (not shown)
J8302 Inner Protective Lens 107 x 51mm (J5034, J5035, J5036, J5037) (not shown)
J52433 Air Hose and Cover 80cm (not shown) 1
1
Flip-up holder provided with protective lens, cradle, lens retainer and screws.
2
Air kit provided with twin hose, connectors and adaptor for the R60 AIRMAX* blower unit. To be used with J5037.
3
Single air hose recommended to be used with J5037.
10 Speak to our sales professionals to find the best helmet and ADF solution for you
WH30 ELEMENT
WELDING HELMETS
6
1
7
Visit www.kcprofessional.co.uk 11
WH40 ELEMENT
WELDING HELMETS
J8010
7 1
WH40 Element PAPR Welding Helmet “S” system 4/9 - 13 EXT ADF
J5019 Blue • Extended PAPR variations for welding activities that require respiratory protection
J5021 Black • “S” system that refers to an incorporated welding helmet to the PAPR system
• 4/9-13 ADF with external shade control and a screw-in lens retainer system for a more secure
fastening
• Robust - low weight solution for the most demanding tasks
• Fitted with comfort head gear with easy to adjust mechanism
J5021 • External control allows shade adjustment during the welding task
WH40 Element PAPR Welding Helmet “V” system 4/9 - 13 EXT ADF
J5009 Black • Combined PAPR variation for grinding and welding activities that require respiratory protection
• “V” system that incorporates a B rated PAPR face shield underneath a WH40 Element welding shell
• 4/9-13 ADF with internal controls and an screw-in lens retainer system for a more secure
fastening
• Robust solution fitted with comfort head gear with easy to adjust mechanism
• External control allows shade adjustment during the welding task
9
10 8
11
Speak to our sales professionals to find the best helmet and ADF solution for you 13
WH50 MULTIVIEW WELDING HELMETS &
PAPR HEAD TOPS
J8009
Muliview Welding Helmet & PAPR Head Tops (Without a Welding Filter)
Alternative options for you to separately buy the welding filter that better suits your needs.
Recommended Jackson Safety* Welding Filter
J8003 WH50 Multiview Welding Helmet IRUV5 Carbon 1 J8142 WF30 3/9-12 INT SM ADF
J5012 WH50 Multiview Welding PAPR Helmet “S” SW IRUV5 Carbon Available ADFs for these helmets: 1 J8187 WF40 4/9-13 INT TN ADF
J5014 WH50 Multiview Welding PAPR Helmet “V” SW IRUV5 Carbon 1 J8162 WF40 3/9-12 INT SM ADF
14 Visit www.kcprofessional.co.uk
WH60 TRANSLIGHT
WELDING HELMETS
5
Experience the WH60 Translight for yourself. Call you local sales representative today 15
For a safer and more productive workplace,
KIMBERLY-CLARK PROFESSIONAL* supplies a
range of Safety, Wiping and Washroom Solutions.
KIMBERLY-CLARK PROFESSIONAL* (KCP) warrants that its products: (i) comply with KCP’s standard specifications as of the date of delivery to KCP’s authorised
distributors and direct purchasers; (ii) comply with all KCP labelling representations; and (iii) are manufactured in compliance with all applicable federal, state,
and local laws in effect at the time and place of manufacture of the products. THIS WARRANTY IS IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. KCP and its affiliates are not liable for any kind of
special, incidental or consequential damages. KCP’s liability for breach of contract, tort, or other cause of action shall not exceed the product purchase price.
Purchasers and users are deemed to have accepted the above warranty and limitation on damages. To the extent required by applicable law, KCP and its
affiliates do not limit their liability for death/injury resulting from their negligence.
This warranty must be read in conjunction with the terms set out for each respective product in this catalogue, in particular the limitations or exclusions to this
warranty set out in the notes below. The warranty term for ADFs, welding helmets and PAPR blower units starts to run from the date the device is manufactured
as indicated in the traceability code that goes with each unit.
Physical condition of the defective devices: Any modification to the original design, product markings and/or branding; misuse of the product contrary to the
intended application advertised by KCP, or any other explicit recommendation included in the instruction manual for the product or abuse of the product will
void the warranty. Specific defects on welding filters (ADFs), helmets and PAPR systems not covered by the warranty include:
• Any damage created by fall or impact against a solid object and contact with hot surfaces and flames; exposure to excessive heat or force when adjusting
replaceable components
• Any power supply issues derived from corrosion from batteries exposed to excessive humidity or direct exposure to liquids;
• Any defect caused by spatter on the liquid crystal or solar panel;
• Deterioration from normal use on the decoration of the painted surfaces.
Enquiries: If you suspect that the functionality of the product is affected and the instructions provided with each PPE device cannot solve the problem, stop
the use of the PPE device, locate and register the traceability code printed on the product and contact your sales representative or our technical information
service line: infofax@kcc.com. Our Customer Services may request you to ship the product back to us for further examination and provide further instructions
for cleaning and packaging prior to transportation.
KIMBERLY-CLARK PROFESSIONAL* offers limited warranty on welding filters (ADFs), welding helmets and PAPR components (blower unit) from the date of
purchase by the end user as verified by a valid purchase receipt. For any complaints on this category of products during the warranty period, please follow the
process set out below.
Our complaint management system is based on you completing the complaint form through your correspondent Customer Service representative, making
sure that, at the time you submit your complaint, you already have the respective product code, description of the product malfunction and the batch number
at your disposal in order for us to confirm whether the PPE device is within the warranty period. Based on this, the Customer Service representative will ask you
some questions to clarify whether the PPE device has been subjected to any form of misuse that will void the warranty.
Once all input has been received, our Customer Service representative should be able to resolve your enquiry quickly in most of the cases. In other cases,
preparation of the product for shipment to our facilities may be needed. We strongly recommend you submit your product complaints to your Customer
Service representative as it is discovered, as this will have a direct effect on the validity of the warranty term.
It is the employer’s responsibility to assess the risk of the task to be undertaken and to determine the correct choice of product or personal protective equipment for the
task. The manufacturer, KIMBERLY-CLARK PROFESSIONAL*, does not accept any responsibility for the incorrect choice or misuse of the product or personal protective
equipment shown in this brochure. All care has been taken to ensure that the information contained herein is correct at the time of publication. However legislation
concerning these products or personal protective equipment is under constant review and may change in the lifetime of this brochure. Accordingly, the specification
for the products may be subject to change. We would advise you to contact INFOFAX if you have any queries concerning the products shown or the suitability of such
products for a particular task. Always dispose of used products or protective equipment in a safe and appropriate manner in accordance with European, National and
Local environmental regulations.
www.kcprofessional.co.uk
® and * Trademarks of Kimberly-Clark Worldwide, Inc. © 2012 KCWW Publication code: 4760.01 GB 01.13 infofax@kcc.com
0800 269 470