Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

www.Construct101.

com

Legal:

The content of this guide may not be sold, modified, or distributed in anyway without the expressed
written consent of the publisher. Reprinting, copying, or any other form of distribution for commercial
or non-commercial purposes is strictly prohibited and will be prosecuted.

Disclaimer:

Every attempt has been made to provide the most accurate information as possible. However, the
publisher accepts no liability for any wrong information as a result of purchasing and / or reading this
guide.

You can follow this guide at your own risk the publisher accepts no responsibility for any injury to any
person.

Copyright © www.Construct101.com

All rights reserved

ISBN-13:

ISBN-10:

Visit www.Construct101.com for more DIY Projects Page 1


www.Construct101.com

Porch Swing Stand Plans – Overview

Visit www.Construct101.com for more DIY Projects Page 2


www.Construct101.com

Porch Swing Stand Plans – Material List

Shopping List Cutting List


1 – 2×4 – 10′ A – 4 – 2×6 – 4′

2 – 2×6 – 8′ B – 2 – 4×4 – 6′ 4″

4 – 4×4 – 8′ C – 4 – 4×4 – 1′ 10″ (45-degree angle cuts on both


ends in opposite direction)
3 1/2″ deck screws
D – 1 – 4×4 – 8′

E – 4 – 2×4 – 2′ 6″ (45-degree angle cuts on both ends


in opposite direction)

Visit www.Construct101.com for more DIY Projects Page 3


www.Construct101.com

Cut four 2×6’s to 4′ long (A). Round the top corners as shown on illustration above.

Cut two 4×4’s to 6′ 4″ long (B).

Visit www.Construct101.com for more DIY Projects Page 4


www.Construct101.com

Cut four 4×4’s to 1′ 10″ long (C). Cut 45-degree angle cuts on both ends in the opposite direction, see
illustration above for details.

Cut one 4×4 to 8″ long (D). Notch as shown on illustration above, 3 1/2″ wide x 1 3/4″ deep.

Cut four 2×4’s to 2′ 6″ long (E). Cut 45-degree angle cuts on both ends in the opposite direction.

Visit www.Construct101.com for more DIY Projects Page 5


www.Construct101.com

Pre-drill all holes and assemble swing stand using 3 1/2″ deck screws.

Porch swing plans details here…

Visit www.Construct101.com for more DIY Projects Page 6

You might also like