Professional Documents
Culture Documents
Gt-3 Series: A Reference Guide For All GT-3 Series Users
Gt-3 Series: A Reference Guide For All GT-3 Series Users
T H E G T - 3 S E R I E S
v 1.0
TEMPERATURE HUMIDITY
18 %
MIN
45 °
MIN
MAX MAX
C 30 °
85
NOZZLE CHECK
Always Platen at level A.
Menu > Test Print > CMYK > OK
If not all the nozzles are firing, start a cleaning.
Only a few missing, then Normal Cleaning
If more then 10, perform Powerful Cleaning
PH PH
3 mm Ink Mist Ink Mist
10 mm
A
F
> ALWAYS KEEP THE CLOSEST DISTANCE BETWEEN THE PRINTHEADS AND THE SURFACE OF THE GARMENT !
HOW TO CLEAN PRINTHEADS
PRE-TREATMENT RATIO
1,25 Kg 2 Kg 3,25 Kg
35
Pre 180°C 5 - 5,5
Bars
Treatment
1/2 distilled
water Seconds 360°F 75 PSI- 80
Ink
Curing
Heat Press
35
Seconds
180°C 0,7 - 1,4
360°F 10 - 20
Bars
PSI
Ink
Curing 3,30 160°C
Tunnel Dryer Minutes 320°F
DAILY MAINTENANCE
1 Shake well all the White cartridges
2 Daily Cleaning White > All Whites
3 Print a nozzle check
4 Check the environmental conditions for best print result:
min. temperature 18° & min. 45% humidity
WEEKLY STANDARD MAINTENANCE
361 1 WTC WA WA WA WA - -
> ONLY
White TubeFOR USERS PRINTING
Cleaning A MINIMUM
Daily Cleaning White OF 15 PRINTS
White Agitation
381 2
WITH
DCW WA WA WA WA
WHITE INK ON BLACK OR DARK T-SHIRTS A DAY - !!! -
3 WTC WA WA WA WA - -
W 4 DCW WA WA WA WA - -
>5 working
3 or daysdays
4 working a week
a week Min.15
Min. 15white
whiteprints
printsaaday!
day!
Week Mon Tue Wed
Wed Thu
Thu Fri
Fri Sat
Sat Sun
Sun
361 1 WTC WA WA WA
DCW WA
WA -- --
381 2 DCW WA
WTC WA
WA WA
WA WA -- --
3 WTC WA WA
WA WA WA -- --
W
4 DCW WA WA
WTC WA
WA WA
WA -- --
www.touchdownplaten.com
www.capplaten.com
www.gripperkit.com
www.shoeplaten.com
P-DIP SOFTWARE
This program will recognize and open “.bmp, .gif, .jpg, and .png” formats.
It is not a graphic image editing software. This is for outputting an image that has
gradients and fades to the Brother GT-3 printer(s).
P-DIP will also correct slight anti-alias issues.
> NEVER CHANGE MACHINE MODE TO 341 MODE WHEN WHITE HEADS ARE IN THE MACHINE!
> 341 Mode should only be used when white printheads are NOT installed.
Maybe just at installation, when customer decides to use white ink much later
Company Name:
Representative:
Email address:
Phone number:
> Driver WHITE settings for Brother GT3 Series printers
Highlight 1 2 3 4 5 6 7 8 9 10
Whiteness 200 % 300 % 400 % 466 % 555 % 667 % 800 % 867 % 933 % 1067 %
Print Time X1 X1 X1 X2 X2 X2 X2 X3 X3 X3
Layers 1 1 1 2 2 2 2 1+2 1+2 1+2
381 600 dpi
Plate Move 1 1 1 1 1 1 1 2 2 2
Print Time X2 X2 X2 X2 X2 X4 X4 X4 X4 X4
W W W W
Layers 1 1 1 1 1 2 2 2 2 2
C M Y K 1200 dpi
Plate Move 1 1 1 1 1 1 1 1 1 1
Highlight 1 2 3 4 5 6 7 8 9 10
Whiteness 200 % 300 % 400 % 466 % 555 % 667 % 800 % 867 % 933 % 1067 %
Print Time X1 X2 X2 X3 X3 X4 X4 X5 X5 X6
Layers 1 2 2 1+2 1+2 2+2 2+2 2+1+2 2+1+2 2+2+2
361 600 dpi
Plate Move 1 1 1 2 2 2 2 3 3 3
Print Time X2 X4 X4 X4 X4 X6 X6 X8 X8 X8
W W
Layers 1 2 2 2 2 1+2 1 +2 2+2 2+2 2+2
C M Y K 1200 dpi
Plate Move 1 1 1 1 1 2 2 2 2 2