Professional Documents
Culture Documents
After-Sale Service Photo Taking Standards
After-Sale Service Photo Taking Standards
MOBILE
USER NAME RENATO BAYTA +639298714341
NUMBER
MACHINE
WORKING HOURS 200 JGN15340
SERIAL NUMBER
RICHARD
SERVICE MAN SERVICE DATE JUNE 14, 2021
CAMPOS
□ (Satisfied)
END USER
□ (commonly) Signature:
SIGNATURE
□ (Dissatisfied)
1 、 The brand name of the whole machine, all contents of the photo should be
clearly visible, four rivets should be shown in the photo, the shooting Angle
should be positive, the photo is as follows:one photo
2、Meter working hours photo, to clearly see the working hours number on the
meter, the whole meter display screen should be in the photo, the photo is as
follows:one photo
3、After receiving the repair report from the user, go to the fault site of the user's
machine and take the site photos at a distance of 10 to 20 meters from the
machine. The photos are as follows:one photo
4 、Photos of the fault position. Check the machine failure after arriving at the
scene, judge the damaged fault parts and take photos. The photos are as
follows:one or more photos
5 、 The photos of the old and new parts at the site will be removed after the
correct determination of the faulty parts through on-site inspection. The faulty
parts and the new parts will be put together to take photos. The photos are as
follows:one or more photos
6、Photos of installation of new parts on site. After the replacement of new parts,
take photos of the installed new parts. For example, when multiple parts are
replaced in different parts, one picture for each part is as follows :one or more
photos