Professional Documents
Culture Documents
Activation of Second Rear Fog
Activation of Second Rear Fog
Activation of Second Rear Fog
I have a 2017 SE-L Estate RHD UK spec, with LED headlights and NON LED rear lights.
I found that only the right hand fog light came on but on checking established that
there was a bulb fitted in the left hand cluster and could see it was not an LED through
the lens.
Then I found the key to the change that would activate it.
10 - Adaptations
Then look at both of the following settings to establish what the differences are.
Leuchte26NSL LA72
Leuchte27NSL RC6
When viewing either of the above there are 3 values that will be different:
Whichever has the values is in the active lamp. You need to make a note of them and
make the other the same. The main one is the LASTTYP.
That indicates the type of lamp you have fitted. Right down the value as you will be
looking for the same lamp on the other side.
All of the adaptations have suggested "32 allgemeine LED bis 12W"
This is a type of lamp and may not be the same as yours.
Once you select LASTTYP you will see a long list of different lamp types.
Select the one that matches the lamp you already have. Then change:
and DIMMWERT either AB26 or AB27 which ever is the setting that is on 0 to match
the other value. I found it to be 100.
……………………………………………………………………………………………………………………………
…………………
The LED brake lights come on when you open the boot:
09 Central Electronics
16 Security Access - Enter 31347
10 Adaptations
………………………………………………………………………………………………………………….
Sound signal with the horn when closing, opening or in both cases.
In the menu you can select whether to ring or not, but you cannot select only when
opening or only when closing.
If you are only interested in one of the two options, activate in the mod only the one
that interests you.
………………………………………………………………………………………………………
…………………………
…………………………………………………………………………………………………………………………
The right mirror lowers to the position memorized with this mod, when you
put the reverse gear and the mirror selector in R.
To memorize the reverse gear position, set the mirror selector to R. Engage reverse.
Adjust to a position that suits you. Put the gear out of reverse and wait a few seconds.
Change the selector to 0 and the mirror should return to the normal driving position .
…………………………………………………………………………………………………
* Applicable up to MY16 *
If you leave the car with the windows down and it starts to rain, the car automatically
closes the windows. Closed car.
You need to have the rain sensor with four blue sensors. With the two sensor
it does not work.
1 - Module 09 - Electronic control unit - Code (31347)
2 - Adaptation
3 - Access control 2
4 - Regenschliessen ein aus - (Change value to Activated)
5 - Menuesteuerung regenschliessen - (Change value to Activated)
6 - Regenschliessen art (Closing mode) - (Change value to Permanent)
7 - We enter Sub Systems
8 - Go to the RLHS or RLFSS component (The name can change)
9 - Extended coding (Bytes mode)
10 - Byte 0 - (Activate Bits 1 and 2)
As a detail, in order for the windows to close in the event of rain to work, the
windshield selector lever must be in Auto mode, if it is not, it does not work .
……………………………………………………………………………………………………………………………
……………………………………………………………………………..
With this modification you can adjust the sensitivity of the light sensor.
1 - Module 09 - Electronic control unit - Code (31347)
2 – Adaptation
3 - Assist light functions
4 - Lichtsensorempfindlichkeit - (Change value to desired - Normal by default)
…………………………………………………………………………….
……………………………………………………………………………………………………………………………
If you are thinking of putting LEDs on the front fog lights, with this modification you will
avoid the error of bulb failure.
………………………………………………………………………………
……………………………………………………………………………………………………………………………
…………………….
…………………………………………………………………………………………….
External rear lights come on when the boot is opened (LED lights)
External taillights They light up when the boot is opened (NO LEDs)
* Applicable up to MY16 *
1 - Module 09 - Electronic control unit
2 - Adaptation
3 - Leuchte20BR LA71
4 - Lichtfunktion F 20 - (Change to Heckdeckel offen)
5 - Dimmwert EF 20 - (Change to 120)
6 - Dimming Direction EF 20 - (Change to maximize)
7 - Leuchte21BR RC8
8 - Lichtfunktion F 21 - (Change to Heckdeckel offen)
9 - Dimmwert EF 21 - (Change to 100)
10 - Dimming Direction EF21 - (Change to maximize)
…………………………………………………………………………
Enabled wireless projection in the android auto app via the developer options on my Galaxy S9.
Updated the infotainment firmware to the latest version - 1433.
Enabled the followed the following which I found on another thread here:
Adaptation
Values:
Google_GAL_Wireless:
New value: On
wlan_5ghz_switch:
Apple_DIO_Wireless:
New value: On
I didn't think the coding would work as i wasn't sure the MIB2 had 5ghz wifi but it accepted all of th
Does anyone know if there if more coding that's required to get it to work or is it a hardware issue,