Professional Documents
Culture Documents
Smart - RTWP Investigation - 202, Cattleya - 03292017 - v2
Smart - RTWP Investigation - 202, Cattleya - 03292017 - v2
Smart - RTWP Investigation - 202, Cattleya - 03292017 - v2
Objective:
Perform PIM Testing at all sectors.
Rectify PIM problem and perform post-PIM Test.
Before After
Before After
• Fixed Tone ( Peak -94.1 dBm) • Fixed Tone ( Peak -97.4 dBm)
• Typical Fixed Tone is high (around -95 dBm) • Typical Fixed Tone is Good (around -100dBm)
• Recommended for cleaning of ports for more • Cleaned ports and terminated properly. Test jumper
improvement cable only and replaced antenna with a dummy load
PIM and peak PIM at -110 dBm.
4 30/03/2017 © Nokia 2017
Confidential
Sector 2 MAIN PIM Performance Site 202
Test Jumper Cable with Antenna
Before After
• Fixed Tone ( Peak -93.4 dBm) • Fixed Tone ( Peak -109.7 dBm)
• Typical Fixed Tone is high (around -95 dBm) • Typical Fixed Tone is Good (around -115 dBm)
• Recommended for cleaning of ports • Cleaned ports and properly terminated cables and
antenna
7 30/03/2017 © Nokia 2017
Confidential
Sector 3 DIV PIM Performance Site 202
Test Jumper Cable with Antenna
Before After
• Fixed Tone ( Peak -96.1 dBm) • Fixed Tone ( Peak -110.6 dBm)
• Typical Fixed Tone PIM values (around -100 dBm) • Typical Fixed Tone is Good (around -120 dBm)
• Recommended for cleaning of ports. • Cleaned ports and properly terminated cables and
antenna
8 30/03/2017 © Nokia 2017
Confidential
SUMMARY
• Performed PIM testing in all sectors.
• PIM level in Sector 2 was good, so rectification was needed.
• PIM level in Sector 1 and Sector 3 was not so high, but improved PIM value was achieved when
ports were cleaned and properly terminated.
• No external source of PIM.
No other passive component except for the No other passive component except for the No other passive component except for the
jumper cable and antenna. jumper cable and antenna. jumper cable and antenna.
Remarks
Action Taken on Cleaned ports and terminated properly. For Cleaned ports and terminated properly.
DIV, replaced antenna with dummy load.
Site
MAIN: -114.4 dBm MAIN: -109.7 dBm
DIV: -97.4 dBm. When antenna replaced by DIV: -110.6 dBm
dummy load, the peak PIM became -110 NO RECTIFICATION REQUIRED.
Results dBm.
Monitor impact of PIM improvement to the Monitor impact of PIM improvement to the
network. network.
Recommendation
Test antenna alone.
Status/ Monitor network performance after No rectification done in this sector. Monitor network performance after
Recommendation improvement on PIM. improvement on PIM.