Professional Documents
Culture Documents
3003, 3013, 3014 and 3024 Crankshaft Main Bearings - Install
3003, 3013, 3014 and 3024 Crankshaft Main Bearings - Install
Page 1 of 2
Shutdown SIS
Previous Screen
i01289999
Installation Procedure
1. Install the main bearings into the correct halves of the main bearing cap.
Note: Refer to the identification marks that have been made on the main bearings.
Illustration 1 g00659572
301.5 301.6 301.8 Mini Hydraulic Excavator 3YW00001-UP (MACHINE) POWERED B... Page 2 of 2
2. Position the upper half of main bearing cap (2) in position on the crankshaft. Position the lower
half of main bearing cap (4) in position on the crankshaft.
Note: Ensure that dowels (3) are in the correct position. This will ensure that the two halves of
the main bearing caps are aligned.
Tighten the bolts on the 3013, 3014, and 3024 Engines to the following torque : ... 51 N·m (38
lb ft)
End By: Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install".
Copyright 1993 - 2022 Caterpillar Inc. Tue Jun 14 18:28:00 EST 2022
All Rights Reserved.
Private Network For SIS Licensees.