Professional Documents
Culture Documents
Mi̇taş Y-011 Mill Test
Mi̇taş Y-011 Mill Test
Mi̇taş Y-011 Mill Test
Y-011
EN 10204:2004 / 3.1 No Du Certificat:
Standard : EN 10025-2:2014
Description of
Goods:
EN10056-1-17,
Tolerance :
EN10056-2-93
Mechanical Properties -
Impact Test (V-Notch)
Notre Commande
Properties Mechaniques
EN ISO 148-1:2016
Our Order No:
Elongation/Allong.(%)
Hardness - Dureté
Size-Dimension:
No Couláe :
Material:
Matiàre:
Heat No :
AVR.
at °C
C Si Mn P S Cr Ni Mo Cu Ti Co N Sn Al V Nb B Cev
1 2 3
% % % % % % % % % % % % % % % % % %
KÖŞEBENT L 130X130X14 MM S355JR 192526 0,20 0,23 1,24 0,009 0,026 0,102 0,145 0,026 0,22 0,002 0,011 0,005 0,006 0,002 0,002 0,005 0,0002 0,45 364 585 28,6
KÖŞEBENT L 130X130X12 MM S355J0 194961/21 0,18 0,21 1,28 0,013 0,013 0,015 0,060 0,026 0,24 0,002 0,011 0,007 0,001 0,001 0,012 0,006 0,0001 0,45 376 603 28,2 65 72 77 71,3 7,5 X10X55 0
Tests to verify quality have been carried out -Tests de verification de la conformite de la nuance fournie- Standard for surface : Banding Test -qure Visual Inspection and Dimensional Check -Examen The Surveyor-L`expert:Ersin PEK
OK EN10163-3:2004,Class C,Subclass 1 D=2s<180° Visuel et Dimensionel de Surface- OK
Material are manufactured,inspected,tested and sampled in accordance with the requirement of manufacturing standard found satisfactory and comply.
Dimension and material surface apperearance result is acceptable and satisfactory.
The test results are in accordance with EN 10025-2:2019 RP.20 REVİZYON:02