Professional Documents
Culture Documents
Aravinth Periathambi - CV
Aravinth Periathambi - CV
Education
Professional Experience
MIE., Chartered Engineer
M-153672 Overall Experience: 15+ years in Structural Engineering
Email: From January 2019 till date working as Lead Engineer in Fichtner India
aravinthp79@gmail.com Pvt Ltd., Chennai.
aravinthp@yahoo.com
From February 2010 to December 2018 – Mott Mac Donald Pvt Ltd.,
Mobile: Chennai. Designation : Principal Structural Engineer.
+9194443 61299
Roles and Responsibilites
Contact Address: Experience in analysis and design of Main Power plant structures,
No 110, SF1A, Balance Of Plant (BOP), Non Plant buildings, Chimney design,
Vasanth Apartment,
water-retaining structures, design of Pipe & cable racks,
MS Kovil Street,
Royapuram, Commercial IT parks, industrial sheds and institutional buildings,
Chennai – 600 013 Proficient in various software: Staad Pro V8i, SAP2000, Etabs 2013,
Robot, Fastrak, Prokon & TEDDS
Personal Data: Good knowledge of Indian Standards(IS), Eurocodes (EC), American
Standards (ACI) and British Standards(BS).
DOB : 06-03-1979. Proficient in reviewing construction documents and checking per
Gender : Male. QA/QC standards.
Nationality : Indian.
Marital Status : Married. Experience in budgeting - estimate man-hours; Experience in guiding
Father’s Name : Dr.P.Periathambi junior team members.
Proficient in Inter-Disciplinary coordination with Mechanical, Piping,
Linguistic Abilities: Electrical, Architectural, Plumbing from schematic design through
Tamil, English. construction.
Familiar in reviewing model with Naviswork and clash detection.
Favourite Pursuits:
Yoga, Kabbadi. Design Exposure
Power Plant Sector - STG building, HRSG & Main stack foundation,
Bye Pass stack foundation, GTG dynamic foundation, RCC
Chimneys, enclosed and open steel structures, Pipe racks, Pump
houses & Non-Plant buildings.
Water Sector - Design of effluent treatment plant PST, SST tanks
potable water and fire water tanks, swimming pool.
Built Environment Sector - Flat slab & Flat plates, Steel/composite
floors/Precast slab, Disproportionate collapse, Shear walls.
Prepare Tender documents for 2x171 MW Green field Coal Fired Power plant in Botswana, Southern Africa,
(As an Independent Power Producer by Jindal JSPL, South Africa)
Two weeks Site visit to Botswana, Southern Africa to understand the material availability, shipping of
equipment’s and materials, cost analysis and cost implications.
Involved in the preparation of Bank Feasibility study report (civil part), Civil, Structural & Architectural Owner
Tender specifications for main plant, Balance of Plant (BOP) and Non plant buildings, design criteria’s and
Finalisation of Plot plan.
Mouda super thermal power project, Stage II (2x660MW)- Unit No. 3 & 4, (FGD) system package.
Involved in the analysis, design & detailed engineering of Chimney (Shell only condition and Shell with lining
condition), Flue Gas Duct Supporting Structures and Lime stone unloading shed, BRU shed, UG sumps.
Preparation of design documents and got the approval from NTPC.
Tata Steel Limited, Kalinganagar, Odisha, Overhead Yard Piping & cable gallery for the inter plot
connectivity route
Involved in the analysis, design & detailed engineering of pipe rack using Staad Pro V8i. And preparation of
design document.
Feb 2010 – Dec 2018 Mott MacDonald, Chennai.
Principal Structural Engineer, Chennai, India
Projects Involved:
Greenfield VSF Vilayat Project, Gujarat. India.
Lead engineer responsible for the analysis and design of the main VSF plant & Auxiliary plant includes Pulper and
slurry section, Xanthation, ripening room & Flash deaerator, Spinning area, After treatment, Dryer and Bailing
portion, MSFE plant & Salt recovery plant.
The structure is modelled as three-dimensional frames. The structure is analysed for dead load, live load, super
imposed dead, equipment dead load, equipment operating load, Wind load & Seismic loads using Staad Pro V8i.
Analysis and design is done based on IS 456:2000, IS 1893 -2002. Worked and guided engineers on the design &
detailing, checking of design document, drawings & co-ordination with the lead office and the site.
Aluminium Extrusion Plant, Abu Dhabi – Talex
Lead Engineer responsible for the analysis and design of Waste water tank, Piezometric tower, three scrap
buildings & Logistics centre. The waste storage tank is modeled and analyzed in STAAD using Finite element,
checked manually with Moody's chart and designed. Assisted in the preparation & checking of drawings.
SWTP - Tareeq Al Matar at Saudi Arabia - For Kentz Engg. International Co. Ltd.
Team lead responsible for the completion of various stages of design - 60%, 90% & IFC and detailing of the
various elements of SWTP - Primary sedimentation tank (Four circular tank of 30m dia) , Secondary sedimentation
tank (Four circular tank of 37m dia), Primary pump station & distribution well, Secondary pump station &
distribution well, Chlorine contact tank, PST Sludge well. All the structural elements were designed for
Environmental Concrete Structures ACI 350-06 and ACI 318M-08. Attended design review meeting of clients -
Kentz and reviewer M/s. Jacobs (UK) and got the approval for design document and drawings.
Raw Water Treatment Plant - Jindal Steel and Power Ltd., Orissa, India.
Lead Engineer responsible for the analysis, detailed design and documentation of the Raw Water Treatment Plant
for Jindal Steel & Power Ltd. The Raw Water treatment plant consists of Common make up water sump, Pump
House, MCC Room, Common drinking water sump, UHRC, Chemical house and Chlorine house.
The common make up water sump is 15m wide x50m length, height is 9.8m. It is designed using IS 3370 - outer
wall with counterforts at every 5m intervals and column spaced at 7.5m centre between the walls.
2007 – 2009 MOTT MACDONALD GROUP Senior Structural Engineer, Chennai, India
Dundee University - MM Aberdeen, UK.
Senior structural engineer responsible for the RIBA Stage D structural design & drafting of the four storey
reinforced concrete flat slab building. Floors comprise flat slab construction supported by internal and external
columns and walls.
Presented a technical paper entitled “HIGH PERFORMANCE CONCRETE”, in all India Seminar on ‘Emerging
Trends in Structural Mechanics & Composites’ (ETSMC—2003) held at National Institute of Technology,
st nd
Rourkela, Orissa during 1 and 2 Nov ‘2003 as Post Graduate Scholar.
Declaration:
I, the undersigned, certify that to the best of my knowledge and belief, these data correctly describe me, my
qualifications, and my experience.
Yours sincerely,
Aravinth Periathambi