Professional Documents
Culture Documents
Low Voltage Alternators - 4 Pole: 1860 To 2500 kVA - 50 HZ / 2230 To 3000 kVA - 60 HZ Electrical and Mechanical Data
Low Voltage Alternators - 4 Pole: 1860 To 2500 kVA - 50 HZ / 2230 To 3000 kVA - 60 HZ Electrical and Mechanical Data
Low Voltage Alternators - 4 Pole: 1860 To 2500 kVA - 50 HZ / 2230 To 3000 kVA - 60 HZ Electrical and Mechanical Data
General characteristics
Insulation class H Excitation system AREP + PMI
Winding pitch 2/3 (n° 6S) AVR type D 510C
Number of wires 6 Voltage regulation (*) ± 0.5 %
Protection IP 23 Short-circuit current 300% (3 IN) : 10s
Altitude ≤ 1000 m Total Harmonic Distortion THD (**) in no-load: <4%
Overspeed 2250 min-1 Waveform: NEMA = TIF (**) < 50
Air flow 2.5 m3/s (50 Hz) - 2.8 m3/s (60 Hz) Waveform: I.E.C. = THF (**) <2%
(*) steady state (**) between phases
LSA 52.3 S5 kVA 1860 1691 1696 1542 1972 1793 2046 1860
kW 1488 1353 1357 1234 1578 1434 1637 1488
LSA 52.3 S6 kVA 2000 1818 1824 1658 2120 1927 2200 2000
kW 1600 1454 1459 1326 1696 1542 1760 1600
LSA 52.3 S7 kVA 2200 2000 2006 1824 2332 2120 2420 2200
kW 1760 1600 1605 1459 1866 1696 1936 1760
LSA 52.3 L9 kVA 2360 2145 2152 1956 2502 2275 2596 2360
kW 1888 1716 1722 1565 2002 1820 2077 1888
LSA 52.3 L12 kVA 2500 2273 2280 2073 2650 2409 2750 2500
kW 2000 1818 1824 1658 2120 1927 2200 2000
LSA 52.3 S5 kVA 1860 1934 2046 2232 1697 1765 1866 2036 1972 2051 2169 2366 2046 2128 2250 2455
kW 1488 1547 1637 1786 1358 1412 1493 1629 1578 1641 1735 1893 1637 1702 1800 1964
LSA 52.3 S6 kVA 2000 2080 2200 2400 1824 1897 2007 2189 2120 2205 2332 2544 2200 2288 2420 2640
kW 1600 1664 1760 1920 1459 1518 1606 1751 1696 1764 1866 2035 1760 1830 1936 2112
LSA 52.3 S7 kVA 2200 2288 2420 2640 2007 2087 2207 2408 2332 2425 2565 2798 2420 2517 2662 2904
kW 1760 1830 1936 2112 1606 1670 1766 1926 1866 1940 2052 2238 1936 2014 2130 2323
LSA 52.3 L9 kVA 2360 2454 2596 2832 2153 2239 2368 2583 2502 2602 2752 3002 2596 2700 2855 3115
kW 1888 1963 2077 2266 1722 1791 1894 2066 2002 2082 2202 2402 2077 2160 2284 2492
LSA 52.3 L12 kVA 2500 2600 2750 3000 2280 2371 2508 2736 2650 2756 2915 3180 2750 2860 3025 3300
kW 2000 2080 2200 2400 1824 1897 2006 2189 2120 2205 2332 2544 2200 2288 2420 2640
% LSA 52.3 S7
Load - % kWe
10%
10%
20%
Voltage dip
Voltage dip
20%
30%
L12
30%
L12
L9
L9 40%
S5
S5 S7
S7 S6
S6
40% 50%
kVA at P.F. = 0
0
1000
2000
3000
4000
5000
6000
7000
8000
0%
10%
20%
Voltage dip
30%
40%
L12
L9
S5 S7
50%
S6
20%
10%
0%
0
500
1000
1500
2000
2500
3000
3500
4000
4500
% LSA 52.3 S7
Load - % kWe
10%
10%
Voltage dip
Voltage dip
20%
20%
30%
L12
L12
L9
L9 S5
30%
S5 S7
S7 40%
S6
S6
40% 50%
kVA at P.F. = 0
10%
Voltage dip
20%
30%
L12
40%
L9
S5 S7
S6
50%
L12
Voltage rise
30%
20%
10%
0%
0
500
1000
1500
2000
2500
3000
3500
4000
4500
Short-circuit curves
LSA 52.3 S5
Current (A)
Seconds
LSA 52.3 S6
Current (A)
Seconds
LSA 52.3 S7
Current (A)
Seconds
Short-circuit curves
LSA 52.3 L9
Current (A)
Seconds
Seconds
1007
PMG
option
180
1511
488.5
1062
Ø BX f 7
Ø 1008
Ø Nf 8
Ø 332
518
500 -1
0
237.5
35
AIR OUTLET 319 220 220 365 AIR INLET 140 610 140 4
7 410 60 60 80 750 80
LB 910
A
750
Bottom View
J1 J2 J3
k1 k2 k3
Ø 220
Ø 210
Ø 130
Ø 182
Ø 140
Ø 110
Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Torsional rigidity
Moment of inertia: J (kgm2) : (4J = MD2)
Flex plate S.A.E. 18 Flex plate S.A.E. 21 [Nm/rad] (kg.m2)
Type Xr Lr M J Xr Lr M J k1 k2 k3 J1 J2 J3
LSA 52.3 S5 720.4 1689 1420 43.4 702.8 1689 1424 44.3 5.00 10E7 2.50 10E7 1.54 10E7 10.3 32.4 1.5
LSA 52.3 S6 720.4 1689 1420 43.4 702.8 1689 1424 44.3 5.00 10E7 2.50 10E7 1.54 10E7 10.3 32.4 1.5
LSA 52.3 S7 741.5 1689 1453 45 723.9 1689 1457 45.9 5.00 10E7 2.41 10E7 1.59 10E7 10.3 34.1 1.5
LSA 52.3 L9 811.3 1889 1635 50 793.7 1889 1639 50.9 5.00 10E7 2.29 10E7 1.42 10E7 10.3 39 1.6
LSA 52.3 L12 858.4 1889 1808 56.5 840.9 1889 1812 57.4 5.00 10E7 2.14 10E7 1.52 10E7 10.3 45.6 1.4
NOTE : Dimensions are for information only and may be subject to modifications. Contractual 2D drawings can be downloaded from the Leroy-
Somer site, 3D drawing files are available upon request.
The torsional analysis of the transmission is imperative. All values are available upon request.
1007
PMG
option
180
1511
506.5
M 30
1062
Ø 787.4 f 8
36
Ø 1008
Ø 332
518
Ø 150 m6
138 20
500 -1
0
237.5
35
AIR OUTLET 319 220 220 365 AIR INLET 140 610 140 4
7 410 60 60 80 750 80
LB 910
A
750
Bottom View
315
J1 J2 J3
k1 k2 k3
Ø 220
Ø 210
Ø 182
Ø 140
Ø 160
Ø 150
Ø 110
NOTE : Dimensions are for information only and may be subject to modifications. Contractual 2D drawings can be downloaded from the Leroy-
Somer site, 3D drawing files are available upon request.
The torsional analysis of the transmission is imperative. All values are available upon request.
Linkedin.com/company/Leroy-Somer
Twitter.com/Leroy_Somer_en
Facebook.com/LeroySomer.Nidec.en
YouTube.com/LeroySomerOfficiel
© Nidec 2017. The information contained in this brochure is for guidance only and does not form part of
any contract. The accuracy cannot be guaranteed as Nidec have an ongoing process of development
and reserve the right to change the specification of their products without notice.
Moteurs Leroy-Somer SAS. Siège : Bd Marcellin Leroy, CS 10015, 16915 Angoulême Cedex 9, France.
Capital social : 65 800 512 €, RCS Angoulême 338 567 258.
5199 en - 2017.12 / e