Professional Documents
Culture Documents
Cummins Generator Technologies: Part Number: A066R486 Part Revision: A Part Name: Arrangement, Generator Rotor Torsional
Cummins Generator Technologies: Part Number: A066R486 Part Revision: A Part Name: Arrangement, Generator Rotor Torsional
Cummins Generator Technologies: Part Number: A066R486 Part Revision: A Part Name: Arrangement, Generator Rotor Torsional
1843.6
10 DISCS 12 mm
H 1483 1.2mm EACH H
819.5
q
MAIN ROTOR
B 213
2 1 4
q
EXCITER ROTOR
12 EQUI-SPACED
55 MINIMUM
q
SCREWS OR BOLTS
M30 x 3.5 PITCH ENGAGEMENT
HUB FACE
G G
140
SECTION THRU SHAFT END
AND COUPLING SCREWS OR BOLTS
50
40
40
220
219
230
F 190 F
160
120
190
170
7
76.5 10
E E
42
82 34 CONVERSION FACTORS
TO CONVERT TO DIVIDE BY
27.5
kg lb 0.453592
207.5 100 21.5 2 2
kg m lb ft 0.04214
3
410 CORE LENGTH 80 kgcm/rad lbin/rad 1.1521246
2 2
D 266 346.5 580 11 113.5 N/m lbf/in 6894.76 D
47.2 1705.8 2 2
COMPONENT Wt Kg WR Kgm
(1782.3 )
1 SHAFT 454 2.5
2 FAN 29 2.5
3 HUB 116 2.2
208
4 MAIN ROTOR 974 55.9
162.5
C 5 EXCITER ROTOR 75 1.7 C
NOTES: 6 P.MAG ROTOR 6.9 0.019
20
1.SHAFT STIFFNESS: 7 STUB SHAFT 0.9 0.0003
36
THE STIFFNESS OF THE SHAFT BETWEEN THE MAIN ROTOR CORE q TOTAL 1655.8 64.8193
6
AND THE COUPLING HUB FACE IS 300 X 10 kgcm/radian
(STIFFENING EFFECT OF MAIN ROTOR CORE IS NOT INCLUDED IN THIS FIGURE) COUPLING COUPLING
COUPLING COUPLING
2.SHAFT PROPERTIES: COUPLING DIMENSIONS DISC
ASSEMBLY STIFFNESS
MINIMUM YIELD : 260MPa SAE 2
MASS 10-PLATES WR
B MINIMUM ULTIMATE TENSILE STRENGTH : 530MPa SECTION B-B No A B Kg Nm/rad 2 B
SHAFT MATERIAL IS APPROVED BY MARINE AUTHORITIES WHEN APPROPRIATE SECTION A-A kg m
6 2 6
3.MAXIMUM RECOMMENDED VIBRATORY STRESS LEVEL IN THE SHAFT IS 34.47 X 10 N/m 18 571.4 16 29.2 316.8 x 10 0.980
6 2
FOR SPEED RANGE OF 0.95 TO 1.1 X NOMINAL SPEED AND 68.94 X 10 N/m FOR 6
21 673 0 31.6 287.3 x 10 1.891
RUN THROUGH CONDITIONS,FOR INDUSTRIAL MACHINES
4.FOR MARINE AUTHORITIES, THEIR APPROPRIATE RULES WILL APPLY
5.CUMMINS GENERATOR TECHNOLOGIES LTD SHOULD BE NOTIFIED OF ANY ROTORS NOT COMPLYING Cummins Generator Technologies
WITH THESE RULES. CUMMINS GENERATOR TECHNOLOGIES LTD BALANCE ROTORS TO COMPLY WITH DIMENSIONS ARE IN: MILLIMETERS
INTERNATIONAL STD ISO 1940 GRADE 2.5 AND BS 6861 PART 1 GRADE 2.5 [ ] ARE IN: -
SIZE:
A2 SCALE: N/A R
12 11 10 9 8 7 6 5 4 3 2 1
Cummins Data Classification: This document (and the information shown thereon) is Part Number Part Number: A066R486 Part Revision: A
A066R486
Cummins Confidential Confidential and Proprietary and shall not be disclosed to others
in hard copy or electronic form, reproduced by any means, or used Part Name:
Part ARRANGEMENT,GENERATOR
Noun Name ROTORTORSIONAL
ARRANGEMENT,GENERATOR ROTOR TORSIONAL
for any purpose without written consent of Cummins Inc. Drawing Category: Outline State: Released Sheet 1 of 2
Part Number: A066R486
External Regulations No External Regulation 3D image provided when available for visual reference only.
Associated Specifications
Number Name Type Category Sub-Category
Drawing Authorization
Drafter Mihai-Cristian Ilinca Date 11MAR2021
Checker Daniel Ciochina Date 11MAR2021
Approver NO APPROVAL REQUIRED Date
Cummins Data Classification: This document (and the information shown thereon) is Part Number: A066R486 Part Revision: A
Cummins Confidential Confidential and Proprietary and shall not be disclosed to others
in hard copy or electronic form, reproduced by any means, or used Part Name: ARRANGEMENT,GENERATOR ROTOR TORSIONAL
for any purpose without written consent of Cummins Inc. Drawing Category: Outline State: Released Sheet 2 of 2