Professional Documents
Culture Documents
Genx-2B Engines: Oem-Approved Gse & Tooling For
Genx-2B Engines: Oem-Approved Gse & Tooling For
Genx-2B Engines: Oem-Approved Gse & Tooling For
Our trusted & reliable Shipping Stands not only offer the
lowest total cost of ownership, but superior functionality that
can benefit any airline, aircraft hangar, or engine shop:
• Air/Truck Transport or Storage for propulsor* • Select models:
• Transport full engines on specialized large
• Tie-Down Rings on Transportation Base freighter aircraft*
offer secure retainment for both engine
& Shipping Stand • Provide Bootstrap Capability to support engine
during removal/installation from/on aircraft
• Shock-Absorbing Mounts reduce • Roll-Over to achieve minimum height & width to
vibrations during transport pass through side cargo door of aircraft
• Include optional Air-Operated Pneumatic Pump
(-PPK) to raise/lower Shipping Cradle
= Available Feature
11C4510P01
11C4499 11C4467P01 (Manual Jacking
11C4348P01
11C4319P01 (Full Engine) (Accessories) Leg System)
11C4484P03 (Fan Case
AGSE-E215-G01 Boeing 747, 767 & 777 for air for separate/
(Engine Sling) Transfer AGSE-V133-G03
shipment concurrent
Dolly) (Accessory
only shipment
Drive System)
11C4347
(Fan Case
Support Ring)
11C4388 11C4484P03, 11C4348P01
11C4300P02 (Full Engine) 11C4510P01
Boeing 747, 767 & 777 11C4542P01, (Fan Case
AGSE-E175-G03 (Manual Jacking
Douglas DC-10 & MD-11 11C4389 AGSE-L018-G02 Transfer
Leg System)
(Propulsor) (Engine Slings) Dolly)
11C4628
(Ground Handling
Bracket Set)
11C4388 11C4348P01
11C4349P01 (Full Engine) 11C4484P03, (Fan Case
AGSE-E176-G03 Ground Shipment Only AGSE-L018-G02
11C4389 Transfer
(Engine Slings)
(Propulsor) Dolly)
9446M34P02
(Pneumatic
9446M34P01 Tire Dolly)
AGSE-E196-G01 Ground Shipment Only GEnx-1B
9446M34P03
(Shop Dolly)
*AGSE Shipping Stands are designed and built in compliance with the specifications and requirements of the engine’s original equipment manufacturer (OEM). The customer is solely responsible for selecting the appropriate
packaging based upon all information at his/her disposal, including the specific application, regulatory compliances, product compatibility, shipping requirements, and documentation issued by the Engine OEM. Any AGSE-
referenced shipping information presented either in this product literature or other AGSE documentation is intended as general guidance only and should not be considered a complete set of shipping requirements that can alter,
satisfy, or influence both regulatory and Engine OEM shipping requirements. The content found in AGSE marketing materials and other documentation is subject to change; AGSE accepts no liability for loss or damage resulting
from changes, errors, omissions, or misinterpretations of these AGSE publications.
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com 2
OEM-APPROVED FOR THE GEnx-2B ENGINE
FAN STATOR SHIPPING STANDS
11C3004P02-PPK 11C4348P01
Boeing 747 & 777
AGSE-C069-G02 (Fan Case Transfer Dolly) GEnx-1B
Douglas DC-10 & MD-11
for site transport
11C4572P01 11C4348P01
Boeing 747 & 777
AGSE-C084-G01 (Fan Case Transfer Dolly) GEnx-1B
Douglas DC-10 & MD-11
for site transport
Fan Case
Mounting Plate
Ring Support
Rotation
Outlet Guide Vane
Support Ring
Operational convenience
from top to bottom!
Tie-Down Rings
Manually-Operated
Hand Pump
Palletized
Base Frame
*AGSE Shipping Stands are designed and built in compliance with the specifications and requirements of the engine’s original equipment manufacturer (OEM). The customer is solely responsible for selecting the appropriate
packaging based upon all information at his/her disposal, including the specific application, regulatory compliances, product compatibility, shipping requirements, and documentation issued by the Engine OEM. Any AGSE-
referenced shipping information presented either in this product literature or other AGSE documentation is intended as general guidance only and should not be considered a complete set of shipping requirements that can alter,
satisfy, or influence both regulatory and Engine OEM shipping requirements. The content found in AGSE marketing materials and other documentation is subject to change; AGSE accepts no liability for loss or damage resulting
from changes, errors, omissions, or misinterpretations of these AGSE publications.
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com 3
OEM-APPROVED FOR THE GEnx-2B ENGINE
SHIPPING STAND ACCESSORIES &
PROTECTIVE COVERS
= Available Feature
11C4300P02
(Propulsor Shipping Stand) Supports full engine (via
Two {2} Brackets 11,550 lbs
Forward Propulsor 11C4323 attachment to Fan Hub Frame)
11C4628 • Left-Hand 5,239 kg GEnx-1B
Ground Handling Bracket Set (Engine Sling) during transportation or
• Right-Hand (per set)
11C4251 maintenance
(Pedestal Set)
PROTECTIVE COVERS
Lasting protection against dirt, water, and contamination!
PART NUMBER: COMPATIBLE WITH PROVIDES PROTECTION DURING:
Engine OEM PROVIDES PROTECTION FOR: OTHER AGSE EQUIPMENT AIR SHIPMENT GROUND SHIPMENT SITE TRANSPORT
11C4319P01
11C4499 Full Engine
(Propulsor Shipping Stand)
11C4300P02, 11C4349P01
11C4388 Full Engine
(Propulsor Shipping Stand)
11C4300P02, 11C4349P01
11C4389 Propulsor
(Propulsor Shipping Stand)
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com 4
OEM-APPROVED FOR THE GEnx-2B ENGINE
LIFTING FIXTURES
Lifting Ring
Forward Beam
Aft Beam
Engine Sling
Engine OEM P/N: 11C4648P01
AGSE P/N: AGSE-L043-G03
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com 5
OEM-APPROVED FOR THE GEnx-2B ENGINE
SHIPPING CONTAINERS
• Booster 11C4671
• Fan Frame (Pneumatic Tire or Shop Dolly)
11C4678P01 • High Pressure Compressor 9446M34P02
AGSE-E257-G01 Super Core Module GEnx-1B
• Combustor Diffuser Nozzle (Pneumatic Tire Dolly)
• High Pressure Turbine 9446M34P03
• Turbine Center Frame (Shop Dolly)
• Acoustic Panels
11C4306P01 • Bifurcation Assembly
AGSE-C083-G01 Split Engine Components
• Fan Blades
• Spinner
11C4319P01
• Caster Mount Assembly (Propulsor Shipping Stand)
11C4467P01 • Caster Steering Bars for separate/concurrent shipment
AGSE-C082-G01 Accessories • Jacking Leg Assemblies
• Shock Mount Assemblies 11C4510P01
• Tow Bar Assembly (Manual Jacking Leg System)
for storage
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com 6
OEM-APPROVED FOR THE GEnx-2B ENGINE
SITE TRANSPORT
= Available Feature
9446M34P01
9446M34P02 (Propulsor Shipping Stand)
AGSE-E197-G02 Propulsor Pneumatic Tire Dolly GEnx-1B
11C4678P01
(Super Core Shipping Container)
9446M34P01
9446M34P03 (Propulsor Shipping Stand)
AGSE-E197-G01 Propulsor Shop Dolly GEnx-1B
11C4678P01
(Super Core Shipping Container)
Full Engine, Propulsor, or Super Core Shop Dolly Propulsor Shop Dolly
Engine OEM P/N: 11C4671 Engine OEM P/Ns: 11C4348P01
AGSE P/Ns: AGSE-E177-G03
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com 7
OEM-APPROVED FOR THE GEnx-2B ENGINE
PEDESTAL SETS & FAN TOOLING
= Available Feature
PEDESTAL SETS
Another ideal horizontal build-up solution that achieves ergonomically efficient engine centerline heights!
SUPPORTS SELECT MODULES WHEN USED IN CONJUNCTION WITH OTHER PEDESTALS:
MAXIMUM
NUMBER OF MAIN ENGINE WITHOUT CORE MODULE WITHOUT COMPATIBLE WITH
PART NUMBER: MAJOR MODULE(S) LOAD MAIN ENGINE
PEDESTALS LOW PRESSURE TURBINE MODULE CORE MODULE WITH LOW PRESSURE TURBINE MODULE OTHER AGSE
Engine OEM SUPPORTED CAPACITY (configuration options below) FAN
REQUIRED (configuration options below) LOW PRESSURE (configuration options below) EQUIPMENT
(PER SET) MODULE
TURBINE MODULE
#1 #2 #3 #4 #5 #1 #2 #1 #2
8,000 lbs
Turbine Rear Frame 2
3,629 kg
11C4628
10,000 lbs
Fan Hub Frame 2 (Ground Handling
4,536 kg
Bracket Set)
8,000 lbs
Turbine Center Frame 2
3,629 kg
11C4251
10,000 lbs
Forward Fan Case 2
4,536 kg
10,000 lbs
Aft Fan Case 2
4,536 kg
FAN TOOLING
Improve safety & productivity for major module maintenance!
PART NUMBER: COMPATIBLE WITH ACCOMMODATES
DESCRIPTION SPECIFIC FUNCTION
Engine OEM OTHER AGSE EQUIPMENT OTHER SELECT ENGINES
11C3272 Fan Stator/Fan Hub Guide Pin Set (of 16) Aligns Fan Stator Outlet Guide Vane (OGV) Blades with Fan Hub GEnx-1B
11C3403 Fan Blade/Fan Case Taper Gage Set (of 5) Measures Fan Blade Tip clearance F1.5 at 6 o'clock location GEnx-1B
11C4307 Fan Case Runout Measurement Fixture Measures Fan Case full indicator reading at 144.123, 148.567, and 153.011 locations
11C3323 Stage 1 Fan Blade Spacer Removal Hydraulic Tool Removes Fan Blade Spacers from Stage 1 Fan Blades GEnx-1B
11C3398 Stage 1 Fan Blade Spacer Removal Tool Removes Fan Blade Spacers from Stage 1 Fan Blades GEnx-1B
11C4616 11C4514 Enables removal/installation of Fan Stator from/on Propulsor by providing flat,
Fan Inlet Personnel Stand GEnx-1B
(Fan Stator Protective Set) elevated surface to access upper bolts and acoustic panels
11C4514 11C4616
Fan Stator Protector Set Protects Fan Case during module assembly process GEnx-1B
(Fan Inlet Personnel Stand)
11C4397 Fan Forward Acoustic Liner-Protector Protects Inner Forward Fan Case during maintenance
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com 8
©2022 AGSE-Westmont Industries. All rights reserved. R.1.7.22