This document contains a wind load calculation sheet for a structure with dimensions of 30.48m x 15.24m x 6m. It calculates the basic wind speed, pressure, and load on different surfaces of the structure based on its location and dimensions. The load is calculated for four cases: when the wind is across the ridge with positive and negative pressure coefficients, and when the wind is parallel to the ridge with positive and negative pressure coefficients.
This document contains a wind load calculation sheet for a structure with dimensions of 30.48m x 15.24m x 6m. It calculates the basic wind speed, pressure, and load on different surfaces of the structure based on its location and dimensions. The load is calculated for four cases: when the wind is across the ridge with positive and negative pressure coefficients, and when the wind is parallel to the ridge with positive and negative pressure coefficients.
This document contains a wind load calculation sheet for a structure with dimensions of 30.48m x 15.24m x 6m. It calculates the basic wind speed, pressure, and load on different surfaces of the structure based on its location and dimensions. The load is calculated for four cases: when the wind is across the ridge with positive and negative pressure coefficients, and when the wind is parallel to the ridge with positive and negative pressure coefficients.
This document contains a wind load calculation sheet for a structure with dimensions of 30.48m x 15.24m x 6m. It calculates the basic wind speed, pressure, and load on different surfaces of the structure based on its location and dimensions. The load is calculated for four cases: when the wind is across the ridge with positive and negative pressure coefficients, and when the wind is parallel to the ridge with positive and negative pressure coefficients.
WIDTH(W) = 15.24 m Terrian Category = 2 HEIGHT(H) = 6m Bay Spacing(sidewall) = 3.0 End = 3.0 SLOPE = 1 0 Enclosed Condition 0.8 -0.8
Calculation for wind pressure :
k1 = 1.00 General Structure, As per Table-1 of IS-875-Part-3 k2 = 1.130 For Terrian category 3 as per Table 2, Clause: 6.3.2.1-b k3 = 1.00 Upwind slope is less than 3 degree k4 = 1.00 for Non Cyclonic Region Vz = k1xk2xK3xK4XVb = 56.5 m/s wind pressure Pz = 0.6Vz^2 = 1915.35 N/m2 = 1.92 kN/m2 Kd = 1 (Directionality factor) Ka = 1 (Area Averaging factor) Kc = 1 (Combination factor for pressure & Suction) Design wind pressure Pd(not be taken less than 0.7Pz) KdxKaxKcxPz = 1.92 kN/m2 H/W = 0.39 h/w≤0.5 L/W = 2.00 1.5<l/w≤4
Wind load on frame
CASE-1- WIND ACROSS THE RIDGE(ZERO DEGREE) Positive Cpi SURFACE Cpe Cpi Cp=(Cpe-Cpi) Wind load on frame A 0.70 0.8 -0.10 -0.1x1.92x3.048= -0.59 EF -1.20 0.8 -2.00 -2x1.92x3.048= -11.70 GH -0.40 0.8 -1.20 -1.2x1.92x3.048= -7.02 B -0.25 0.8 -1.05 -1.05x1.92x3.048= -6.14 C -0.60 0.8 -1.40 -1.4x1.92x3.048= -8.19 D -0.60 0.8 -1.40 -1.4x1.92x3.048= -8.19 CASE-2- WIND ACROSS THE RIDGE(ZERO DEGREE) Negative Cpi SURFACE Cpe Cpi Cpe-Cpi Wind load on frame A 0.70 -0.8 1.5 1.5x1.92x3.048= 8.78 EF -1.20 -0.8 -0.40 -0.4x1.92x3.048= -2.34 GH -0.40 -0.8 0.4 0.4x1.92x3.048= 2.34 B -0.25 -0.8 0.55 0.55x1.92x3.048= 3.22 C -0.60 -0.8 0.2 0.2x1.92x3.048= 1.17 D -0.60 -0.8 0.2 0.2x1.92x3.048= 1.17
CASE-3- WIND PARALLEL TO RIDGE(90 DEGREE) WITH Posative Cpi
SURFACE Cpe Cpi Cpe-Cpi Wind load on frame A 0.70 0.8 -0.1 -0.1x1.92x3.048= -0.59 EG -0.80 0.8 -1.6 -1.6x1.92x3.048= -9.36 FH -0.60 0.8 -1.4 -1.4x1.92x3.048= -8.19 B -0.25 0.8 -1.05 -1.05x1.92x3.048= -6.14 C -0.60 0.8 -1.4 -1.4x1.92x3.048= -8.19 D -0.60 0.8 -1.4 -1.4x1.92x3.048= -8.19 CASE-4- WIND PARALLEL TO RIDGE(90 DEGREE) WITH Negative Cpi SURFACE Cpe Cpi Cpe-Cpi Wind load on frame A 0.70 -0.8 1.5 1.5x1.92x3.048= 8.78 EG -0.80 -0.8 0 0x1.92x3.048= 0.00 FH -0.60 -0.8 0.2 0.2x1.92x3.048= 1.17 B -0.25 -0.8 0.55 0.55x1.92x3.048= 3.22 C -0.60 -0.8 0.2 0.2x1.92x3.048= 1.17 D -0.60 -0.8 0.2 0.2x1.92x3.048= 1.17