2 Getting Started with the SAG10 Program
‘There are five basic steps to creating a sag and tension report.
Each of these steps has multiple options, and each step may be affected by options you
select for the entire project
* Enter a project title and description, if desired
* Select the conductor for the project
* Enter the ice/wind load and tension limits for the project
* Enter the ruling span lengths
+ Save as a project file
* Calculate sag and tension
thin some steps, you can either use standard data, or you can edit and save custom
data,
2.1 Creating a SAGIO Project
To begin using the SAG10 program, click on the SAG10 icon, The SAG1O banner will
display briefly, then the SAGIO Main Menu screen will appear
+ Enter the project title or number in the Title box.
* Enter descriptive information in the Deseription box.
+ You can edit this information at any
Southwie™ ‘SAG10" Version 4.0.4 User's Manual (19)