Professional Documents
Culture Documents
Potentiometru
Potentiometru
Vishay Sfernice
5.08
2.54 3 2.6
3.1
0.4
0.5 x 0.2
2.54 26 b 5 103 92 c a
Cruciform screwdriver slot 2.5 width 0.5 Deep: 0.55 Max. deep (center): 0.7
Document Number: 51014 For technical questions, contact: sfer@vishay.com Revision: 10-Nov-10 See also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029
www.vishay.com 73
T53
Vishay Sfernice
5 mm Through Hole Trimmer Single-Turn Cermet
ELECTRICAL SPECIFICATIONS
Resistive element Electrical travel Resistance range Standard series Tolerance Standard On request linear
0.25 0.20 POWER IN W 0.15 0.10 0.05 0
Power rating
20
140
155
Circuit diagram
(1)
Temperature coefficient Limiting element voltage (linear law) Contact resistance variation End resistance (typical) Dielectric strength (RMS) Insulation resistance Specification
See Standard Resistance Element Data table 200 V 2 % or 3 0.1 % or 3 1000 V 106 M In accordance with CECC 41100
MECHANICAL SPECIFICATIONS
Mechanical travel Operating torque (max. Ncm) End stop torque (max. Ncm) Unit weight (max. g) Terminals 270 10 1.5 3.5 0.15 Pure Sn (code e3)
ENVIRONMENTAL SPECIFICATIONS
Temperature range Climatic category Sealing - 55 C to + 155 C 55/125/56 Enables cleaning - IP67
www.vishay.com 74
Document Number: 51014 For technical questions, contact: sfer@vishay.com See also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 Revision: 10-Nov-10
T53
5 mm Through Hole Trimmer Single-Turn Cermet
Vishay Sfernice
PERFORMANCES
TESTS Load life CONDITIONS 1000 h at rated power 90'/30' - ambient temp. + 70 C MIL-STD 202 method 106 10 cycles of 24 h constituted with damp heat - cold - vibrations Temperature 40 C - RH 93 % 56 days - 55 C to + 125 C - 5 cycles 100 cycles - rated power MIL-STD 202 method 213/1 100 g - 6 ms 3 successive shocks in 3 directions MIL-STD 202 method 204/D 20 g - 12 h TYPICAL VALUES AND DRIFTS RT/RT (%) 2% Contact res. variation: R < 1 % Rn 2% Dielectric strength: 1000 VRMS Insulation resistance. > 104 M 2% Dielectric strength: 1000 VRMS Insulation resistance: > 104 M 1% (3 % + 5 ) R1-2/R1-2 (%) 3%
Moisture resistance
3%
Long term damp heat Thermal shock Rotational life (electrical and mechanical) Shock
3% V1-2/V1-3 2 %
1%
V1-2/V1-3 1 %
Vibration
1%
V1-2/V1-3 1 %
Document Number: 51014 For technical questions, contact: sfer@vishay.com Revision: 10-Nov-10 See also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029
www.vishay.com 75
T53
Vishay Sfernice
MARKING
Vishay trademark Ohmic value (in , k, M) is indicated by a three figure code, the first two are significant figures, the third one is a multiplier. Example: 100 = 10 101 = 100 102 = 1000 503 = 50 000 Manufacturing date is indicated by four digits, the first two for the year, the last for the week number.
PACKAGING
In box of 250 pieces code B41 (B0250)
Model T53
STYLE Y
TOLERANCE 20 % On request: 10 %
www.vishay.com 76
Document Number: 51014 For technical questions, contact: sfer@vishay.com See also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 Revision: 10-Nov-10
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
www.vishay.com 1