Engine Oil (Checking The Level) : Warning

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

106931674_002

Engine oil (Checking the level)

WARNING
Improper operation or service of this machine can result in an accident.
Read and understand the SAFETY INFORMATION chapter before you perform any maintenance, ser-
vice, or repairs. Read and understand the specific service procedures for the components you plan
to work with before you start servicing the machine.
Failure to comply could result in death or serious injury.
W0138B

NOTICE: The engine oil level should be checked every 10 hours of operation or each day, whichever occurs first.
For lubricant specifications, see Capacities .
NOTE: Handle and dispose of the waste in accordance with environmental regulations, laws and government codes.

Checking the engine oil level


To check the engine oil level, proceed as follows:
1. Keep all unauthorized personnel clear of the area.
2. Park the machine on a flat, level, firm surface, away
from any obstacles.
3. Position the arm, boom and bucket or implement as
shown.
4. Set the park brake.
5. Place the safety lever in the function lockout posi-
tion.
6. Place the ignition key in the "OFF" position to shut
down the engine.
NHC0257 1
7. Remove the ignition key.
8. Put the safety lever in the locked position.

9. Wait between 10 - 20  min before you start the


check.
10. Open the engine hood. Lock the hood in the open
position.
11. Remove the dipstick.
NOTE: The dipstick is located on the right-hand
side of the engine.
12. Clean the dipstick. Insert the dipstick back into the
guide tube as far as possible.
13. Remove the dipstick again.

COIL16CEX0005AA 2

1 13 June 2022 ZC883 EN


106931674_002

14. Check the oil level.


NOTE: The oil level must be between the “MIN”
(A) and “MAX” (B) marks.

COIL15CEX0032AA 3

15. If the level is below the “MIN” (A) mark, top up


through the filler neck.
NOTE: Do not fill so that the level exceeds the
“MAX” (B) mark.

COIL16CEX0005AA 4

2 13 June 2022 ZC883 EN


106931860_010

Consumables

International
Type / Application Recommended oil Capacity
Specification
Engine oil (Tropical region) No.1 Engine Oil™ Super
SAE 15W-40; API CI-4 16.5  L ( 4.4  US gal )
(With remote oil filter) SAE 15W-40
Engine oil (Cold region) SAE 10W-30 CI-4 Engine
SAE 10W-30; API CI-4 16.5  L ( 4.4  US gal )
(With remote oil filter) Oil
System capacity - 410.0
Fuel tank Light oil (Diesel) (-)
 L ( 108.3  US gal )
Extended Life OAT
Cooling system OAT EG2, 50-50 Premix 25.0  L ( 6.6  US gal )
Coolant/Antifreeze
Premium Hydraulic Oil Multigrade ISO VG 46,
Total system capacity -
Hydraulic oil HV46 Multi-Grade An- DIN 51524-3 HVLP 46, An-
295.0  L ( 77.9  US gal )
ti-Wear ti-Wear (AW)
Premium Hydraulic Oil Multigrade ISO VG 46,
Total system capacity -
Hydraulic sump tank HV46 Multi-Grade An- DIN 51524-3 HVLP 46, An-
162.0  L ( 42.8  US gal )
ti-Wear ti-Wear (AW)
Hypoid Gear Oil EP SAE SAE 85W-140, API GL 5,
Swing drive case 6.0  L ( 1.6  US gal )
85W-140 Extreme Pressure (EP)
Hypoid Gear Oil EP SAE SAE 85W-140, API GL 5,
Final drive case (per side) 5.0  L ( 1.3  US gal )
85W-140 Extreme Pressure (EP)
Adhesive Loctite® 262™ Loctite® 262™ As required
Windshield washer Water Water 1.5  L ( 0.4  US gal )

Grease fittings
International Specifica-
Application Recommended Capacity
tion
Attachment pins 4.8  kg
NLGI 2, lithium soap
Tensioner wheel cylinder Multi-Purpose Moly grease, 3% molybdenum 0.46  kg
Idler Grease EP / AW / NLGI 2 disulfide, Extreme Pres- 3.5  kg
sure (EP), Anti-Wear
Slew ring 14.0  kg

Gear oil
Recommend- International
Application Per roller capacity Capacity
ed Specification
3.78  L (Standard carriage)
Lower track rollers 270  mL
4.32  L (Long carriage)
Shell HELIX
SAE-40
Upper track rollers HX3 SAE 40 120  mL 0.48  L
Take up roller 265  mL 0.53  L

Air Con
International Specifica-
Type Recommended Capacity
tion
Synthetic polyolester
(POE) lubricant for HFC
Compressor specifications (-) 250  mL
R134A of required viscosi-
ty ISO VG 68

1 13 June 2022 ZC883 EN


106931860_010

International Specifica-
Type Recommended Capacity
tion
Environmentally-friendly
Air conditioning gas speci- 0.950 - 1.050  kg ( 2.094
R134a hydro fluoro carbon gas
fications - 2.315  lb )
HFC R134A

2 13 June 2022 ZC883 EN

You might also like