2020 HBR Development Phase I Drilling Campaign

Operation Geology Preparation

Hassi Bir Rekaiz, Berkine basin
Algeria

Subsurface Team
 Agenda

• HBR Overview
• Development Phase I: Subsurface Well Location
• General Subsurface Information
• Expected Pressure and Temperature Profile
• Casing Landing
• 13-3/8” CSG
• 9-5/8” CSG
• Well TD Criteria
• Wireline Logging Program
• Conventional Coring
• Line of Communication
HBR Overview

Development Phase I
 14 New Wells
 3 Recompletion Wells
 Drill in BOG-REZ prospect
 General Subsurface Information

BOG-REZ prospect
Ground Level 120-130 m
Estimated TD
3,900-4,000
(mTVD-MSL)
Max. over pressure 2.10 SG EMW (12-1/4”OH)
Formation Pressure
Reservoir Pressure 1.50 SG EMW (8-1/2”OH)
Temperature Gradient
~2.30
(°C/100m)
TAGI: 0.3-0.6
CO2 Content (%)
ORDO: 0.9-1.1
Triassic clastic reservoir (TAGI)
Reservoir Target
Ordovician clastic reservoir (ORDO)
 Development Phase I: Subsurface Well Location

Proposed well
Planned well
Discovery well
Dry well
POD version
C.I.= 10 m
Depth mTVDss

Top TAGI Depth Structural Map

Pressure and Temperature Profile
• HBR Overview
• Development Phase I: Subsurface Well Location
• General Subsurface Information
• Expected Pressure and Temperature Profile
• Casing Landing
• 13-3/8” CSG
• 9-5/8” CSG
• Well TD Criteria
• Wireline Logging Program
• Conventional Coring
• Line of Communication
13-3/8” Casing Point

Expected Casing Point is 25 mVD below Top Lias Anhydrite

 Shale package near predicted top Lias

Anhydrite will be defined as the top.
 Top Marker Depth will be verified by well
correlation
 9-5/8” Casing Point
N S

Thickness in REZ-BOG is ranging between 13 ( BOG-2) 22 m (BOG-1)

 Expected 9-5/8” Casing Point for BOG-REZ prospect

BOG-1 BOG-XX REZ-1bis BOG-2

Tr. Salt S4
(HZ-60)

206 m 196 m 207 m

Tr. Arg.

11 m 15 m 13 m ~13m above TAGS

TAGS
20m above Tri. Carb
15 m 18 m ~16m above Tri. Carb
15 m
Tr. Carb
(HZ-66)
• HBR Overview
• Development Phase I: Subsurface Well Location
• General Subsurface Information
• Expected Pressure and Temperature Profile
• Casing Landing
• 13-3/8” CSG
• 9-5/8” CSG
• Well TD Criteria
• Wireline Logging Program
• Conventional Coring
• Line of Communication
 Well TD Criteria
S N

Top ORDO
DST#1 DST#1
oil, 10 pu
oil, 7 pu
32 m
36 m oil, 7 pu 34 m

TS Shale water, 7 pu

Water Zone Water Zone

Expected Well TD window

There are 2 factors for TD decision; Including logging pocket
 Reservoir Quality
 Last HC depth
• HBR Overview
• Development Phase I: Subsurface Well Location
• General Subsurface Information
• Expected Pressure and Temperature Profile
• Casing Landing
• 13-3/8” CSG
• 9-5/8” CSG
• Well TD Criteria
• Wireline Logging Program
• Conventional Coring
• Line of Communication
 Wireline Logging Program Summary

Recompletion • 8-1/2”: cement bond log for 7” Liner

BOG-1, REZ-1bis, and BOG-2

• 16”: GR/cement bond log to surface – 6 arm caliper

Conventional • 12-1/4”: GR - density-sonic – 6 arm caliper-cement bond log (13-3/8”csg)
BOG-3, BOG-8, BOG-11, and BOG-15 • 8-1/2”: GR-density-sonic-neutron-resistivity-6 arm caliper-directional survey –
pressure test – check shot - cement bond log (9-5/8” csg and 7” Liner)

• 16”: GR/cement bond log to surface – 6 arm caliper

• 12-1/4”: GR- density - 6 arm caliper-mineralogy detection-dipole sonic – cement bond
Rock Mechanic log (13-3/8”csg)
BOG-5 and BOG-10 • 8-1/2”: GR-density-sonic-neutron-resistivity-6 arm caliper-directional survey-
mineralogy detection-dipole sonic - pressure test - check shot - cement bond log (9-
5/8” csg and 7” Liner)

Step-out well • 16”: GR/cement bond log to surface-density-sonic-6 arm caliper

• 12-1/4”: GR-density-sonic-6 arm caliper-cement bond log (13-3/8”csg)
BOG-12 and BOG-14 • 8-1/2”: GR-density-sonic-neutron-resistivity-6 arm caliper-directional survey –
(Conventional Core) pressure test -borehole imaging – VSP - cement bond log (9-5/8” csg and 7” Liner)

• 16”: GR/cement bond log to surface - density-sonic-6 arm caliper

Salt Detection • 12-1/4”: GR-density-sonic-6 arm caliper-cement bond log (13-3/8”csg)
BOG-13 • 8-1/2”: GR-density-sonic-neutron-resistivity-6arm caliper-directional survey- pressure
test – VSP - cement bond log (9-5/8” csg and 7” Liner)
 1st Batch: BOG-14
OH CH Wireline Logging Program

30”
N/A
mTVDSS

18-5/8”
26”

N/A

400mTVDSS

Cenomanian
salt

Run 1/1/1 *GR – sonic - 6arm caliper

13-3/8”

Run 1/1/2 density

16”

Run 1/1/3 Pressure test (MDT sampling Albian water) Well Location
*GR to surface
Density - Sonic x-plot for Cenomanian salt detection
2400mTVDSS

Run 2/1/1 GR - sonic - 6arm caliper - Cement Bond Log 13-3/8”csg (switch mode)
12-1/4”
9-5/8”

Run 2/1/2 density

Density-Sonic for synthetic seismogram

3600mTVDSS

Run 3/1/1 GR – sonic – resistivity - 6arm caliper -Cement Bond Log 9-5/8” csg (switch
mode)
7” Liner

Run 3/1/2 density – neutron - directional survey

8-1/2”

TAGI Run 3/1/3 borehole imaging

Run 3/1/4 pressure test (MDT Dual Packer*)
Run 3/1/5 VSP
ORDO
*optional subject to well result
3900mTVDSS
 1st Batch: BOG-12
OH CH Wireline Logging Program

30”
N/A
mTVDSS

18-5/8”
26”

N/A

400mTVDSS

Cenomanian
salt

Run 1/1/1 *GR – sonic - 6arm caliper

13-3/8”

Run 1/1/2 density

16”

Run 1/1/3 Pressure test (MDT sampling Albian water) Well Location
*GR to surface
Density - Sonic x-plot for Cenomanian salt detection
2400mTVDSS

Run 2/1/1 GR - sonic - 6arm caliper - Cement Bond Log 13-3/8”csg (switch mode)
12-1/4”
9-5/8”

Run 2/1/2 density

Density-Sonic for synthetic seismogram

3600mTVDSS

Run 3/1/1 GR – sonic – resistivity - 6arm caliper -Cement Bond Log 9-5/8” csg (switch
mode)
7” Liner

Run 3/1/2 density – neutron - directional survey

8-1/2”

TAGI Run 3/1/3 borehole imaging

Run 3/1/4 pressure test (MDT Dual Packer*)
Run 3/1/5 VSP
ORDO
*optional subject to well result
3900mTVDSS
• HBR Overview
• Development Phase I: Subsurface Well Location
• General Subsurface Information
• Expected Pressure and Temperature Profile
• Casing Landing
• 13-3/8” CSG
• 9-5/8” CSG
• Well TD Criteria
• Wireline Logging Program
• Conventional Coring
• Line of Communication
 Conventional Coring

#1 TAGI: 3,830-3,875 mTMD (45 mVD)

#2 ORDO: 3,975-4,015 mTMD (40 mVD)

#1 Cover TAGI and top part of Silurian Shale (5m)

#2 Cover Ouargla sandstone

Coring and preparation before transport:

 4 conventional coring runs with 27m per run
1 meter
 Cut core and aluminum barrel into 1 m
 Seal end cut of aluminum barrel with wax
 Onsite GR (optional)
• HBR Overview
• Development Phase I: Subsurface Well Location
• General Subsurface Information
• Expected Pressure and Temperature Profile
• Casing Landing
• 13-3/8” CSG
• 9-5/8” CSG
• Well TD Criteria
• Wireline Logging Program
• Conventional Coring
• Line of Communication
HBR Line of Communication

Update Time Report types Reporting Remarks

schemes
E-mail and OPG sends updated email
7 AM Routine reports
Telephone to subsurface team
Update operations (in e-mail
text body),
OPG sends updated email
4 PM deviation data, mudlog E-mail
to subsurface team
& LWD realtime data (.PDF
and Ascii) --- if any
Daily including weekend and
8 PM Update operations Telephone
holiday