Professional Documents
Culture Documents
(Solved) The Deflection at The Center of A Fixed - Fixed Beam C
(Solved) The Deflection at The Center of A Fixed - Fixed Beam C
Home
Strength of Materials
Deflection of Beam
Question
Download Soln PDF
The deflection at the center of a fixed – fixed beam carrying a point load at the center is related to the deflection of the simply supported beam by a factor of:
Download PDF Attempt Online
1. 1
2. 0.25
3. 0.50
4. 0.75
Option 2 : 0.25
FREE
General Knowledge & Awareness for All AE/JE Exams - Special Live Test Start Now
20 Qs. 20 Marks 15 Mins
Detailed Solution
Download Soln PDF
Concept:
3 2
PL PL
yB = θB =
3EI 2EI
4
yB =
wL
3
8EI wL
θB =
6EI
2
ML ML
yB = θB =
2EI EI
4 3
wL wL
yB = θB =
30EI 24EI
3 2
PL wL
yc = θB =
48EI 16EI
4 3
5 wL wL
yc = θB =
384 EI 24EI
ML
θB =
24EI
yc = 0
2
ML
yc =
8EI ML
θB =
2EI
3
PL
yc = θA = θB = θC =
192EI
Now,
Deflection at the center of a fixed – fixed beam carrying a point load at the center is
And deflection of the simply supported beam carrying a point load at the center is English Start Learning
Deflection at the center of a fixed – fixed beam carrying a point load at the center = 0.25 × deflection of the simply supported beam carrying a point load at the center.
Download Soln PDF
Share on Whatsapp
EE
FR
India’s #1 Learning Platform
Trusted by 2,76,54,875+ Students
Q1. For a simply supported subjected to uniformly distributed load, if the length of the beam is doubled, deflection becomes ______ times.
Q2. Name the method used for finding the slope and deflection of simply supported beam.
Q3. For a simply supported beam, the maximum deflection will be at the ________.
Q4. A cantilever of length 6 m carries a point load of 48 kN at its centre. The cantilever is propped rigidity at the free end. Determine the reaction at the rigid prop.
Q5. The imaginary beam of same span as the original beam loaded with M/EI diagram of the original beam, such that the shear force and bending moment at a section will represent the rotation and deflection at that section in the original
beam ________.
Q6. Which method uses the theorem which states that the change in the slope between two points on a straight member under flexure is equal to the area of M/EI diagram between those two points?
Q7. A cantilever is subjected to a concentrated load, W at the free end and is propped at the free end to the same level as that of the fixed support. The reaction in the prop (rigid) will be:
Q8. Flexural rigidity of a cantilever beam is EI. A load P and bending moment of PL/2 are applied at the free end of the beam as shown in the figure. Length of the beam is L. Slope at the free end of the beam is
Q9. What is the deflection at the free end of a cantilever beam of length L subjected to point load P as shown in the diagram, where E is Young’s modulus and I is the moment of inertia?
Q10. Which of the following methods is NOT used for finding deflection of beam?
AE & JE Mechanical Engg. Exams Previous Year Papers Mock Test (75+ Papers)
Suggested Exams
UPRVUNL JE
UPPCL JE
SSC JE ME
SSC JE CE