*G6037098R0-02* G6037098R0-02

JUST MIXER 5 English

Owner’s Manual 5 STEREO / 10 MONO CHANNEL MIXER

t
■ Panel Layout ■ USB Audio OUT

r
Thank you for purchasing the JUST MIXER 5 (5 Stereo / 10
Mono Channel Mixer). To take full advantage of the JUST
■ OPERATION

a
1. Connect USB power cable, turn power switch of JUST
MIXER 5 and to ensure proper operation, please read this
MIXER 5 to ON.

h
owner’s manual carefully.
1. USB Port 2. Insert source signal(s) to Input Jacks 1-5.
3. Connect headphones, speaker box or other output device

r
■ FEATURES to OUTPUT and Headphones Jacks. Compatible with multiple OS with

e
2. Power Switch
Stereo 5 In / 2 Out Configuration: Connect up to 5 stereo 4. INPUT Jacks 4. Start with Channel Volume, Master Volume and USB ports, including Windows

ak
inputs or up to 10 mono devices, and output mixed signal to 3. OUTPUT Jacks Headphones Volume Knob settings on low.
5. Bluetooth Channel 7/8/10 & Mac OS.
multiple output jacks and headphones jack. 5. Increase volume on input/source devices first then
6. Power Indicator gradually increase Channel Volume and adjust EQ Control
EQ Control: Adjusts the low / high frequency (bass / treble)
setting on JUST MIXER 5 to the desired levels.
■ IMPORTANT NOTES
level.

M
6. Adjust Master Volume Slider and/or Headphones Volume Please only use the provided power adapter.
Headphones Jack: Stereo headphones can be connected to Knob to increase/decrease overall output signal.
Using other power adapters may cause damage
7. Headphones or malfunction to the mixer or short circuit.
this jack for convenient mix monitoring.
■ General
Volume Knob
USB Audio: Connect your JUST MIXER 5 to your computer 8. EQ Control Knobs NOTES CONCERNING POWER SUPPLY

t
using the provided USB cables. Power the mixer and stream To prevent damage or malfunction to the mixer, please turn

r
audio output to your connected device at the same time. off the power to any input sources before connecting them to

a
※ USB Audio sampling rate: 48KHz/16bits. mixer.
Bluetooth Connectivity: Connect and mix audio from Family entertainment MP3 Phone Please do not connect the mixer to a power supply that is

h
Bluetooth-enabled smart device (CH1 Only). also used to power electric motors, lighting systems and
other devices that may induce noise,

r
Please avoid stepping on or placing heavy items on the

■ SPECIFICATIONS

ke
9. Channel Volume Sliders 10. Master Volume Slider CD /DVD cables.
When unplugging the power adapter from a socket, remove
Nominal Input Level Controls by grasping the power adapter and not the cable.

a
CH1 - CH 5 - Max Gain: 35dBm EQ Knob x 5 Please unplug power adapter from socket during long
Input Impedance Channel Volume Slider x 5 TV periods of disuse.
11.Headphones Jack 12.Bluetooth Switch

M
5.6kΩ Headphones Knob x 1 PLACEMENT
Output Impedance Master Volume Slider x 1 1. USB Port: Connect to power source using provided USB Do not subject the unit to temperature extremes (e.g. direct
OUTPUT 1kΩ Power Switch cable (or another USB cable), can also be used to output audio sunlight in an enclosed vehicle).
Headphones Output Bluetooth Switch Avoid using or storing the unit in dusty or humid areas, or areas
to computer, tablet or phone. Bass
0.1mW (33Ω load) Connectors that are subject to high levels of vibration.
2. Power Switch: Turn JUST MIXER 5 On/Off

t
Power Supply <Front> Using the unit near power amplifiers (or other equipment
3. OUTPUT Jacks: Two separate jacks, including RCA jack

r
USB 5V Headphones jack containing large power transformers) may induce hum.
Energy Consumption (Stereo mini type) and one 3.5mm Output jack.

a
Guitar Microphone Keyboard Drum
400mA (Maximum) <Rear> 4. INPUT Jacks: Five 3.5mm input jacks to plug in audio MAINTENANCE

h
Light Indicator Input (L/R) x 5 devices (e.g. mp3 player or microphones) using TRS mini plug. For everyday cleaning, wipe the unit with a soft, dry cloth
Power Light (red) / (Stereo mini type) 5. Bluetooth Channel: Control audio from Bluetooth ■ or one that has been slightly dampened with water. To

r
Bluetooth Connection Light (blue) Output (L/R) x 1 connected device using CH1 controls (After connecting, CH1 remove stubborn dirt or stains, use a mild, non-abrasive
jack will no longer be used). detergent. Afterwards, be sure to wipe the unit thoroughly

ke
Dimensions (Stereo mini type)
1 Turn on the with a soft, dry cloth. Never use benzene, thinners, alcohol
155(W) x 118(D) x 29(H) mm / RCA x 1 6. Power Indicator: Lights up with a steady red light when Bluetooth switch.
6.1(W) x 4.6(D) x 1.1(H) inches USB Jack x 1 the JUST MIXER 5 is turned on; LED blue light will blink when or solvents of any kind to avoid the possibility of discolor-
ation and/or deformation.

a
Weight Bluetooth function switch is turned on (but not yet paired).
261g / 9.2oz 7. Headphones Volume Knob: Controls volume for 2 Start the Bluetooth connection on your Bluetooth-enabled ADDITIONAL PRECAUTIONS
headphones. *Output level heard on Headphone jack is not device, by looking for and connecting to “Just Mixer5”. When the following situations occur, please turn the power

M
If using a power bank to power mixer, we affected when adjusting Master Volume Slider. off immediately and contact customer service:
recommend not using the power bank to power other 8. EQ Control Knobs: Adjusts the low / high frequency Damaged power adapter or USB cables ; Smoke or smell
devices at the same time, in order to prevent noise.
(bass / treble) level. JUST arising from the unit or power adapter.
MIXER 5
9. Channel Volume Sliders: Adjusts volume control for Objects have fallen into, or liquid has been spilled onto the
■ Accessories each channel.
10. Master Volume Slider: Adjusts the level for the final
unit ; The unit has been exposed to rain (or otherwise has
become wet)
mixed signal for Output. The unit does not appear to operate normally or exhibits a
3 When Bluetooth connection is successfully paired, the marked change in performance.
*G6037099R0* G6037098R0

*The Master Volume Slider does not affect the output to the
JUST MIXER 5
Owner’s Manual 5STEREO / 10MONO

Thank you for purchasing the JUST MIXER 5 (5 Stereo / 10 Mono ■ Panel Layout
Channel Mixer). To take full advantage of the JUST MIXER 5 and to
ensure proper operation, please read this owner s manual
carefully.

LED light will show a steady red and blue light.

1. USB Port

■ FEATURES 2. Power Switch

4. INPUT Jacks
Stereo 3 In / 2 Out Configuration: Connect up to 5 stereo 5. Bluetooth Channel 3. OUTPUT Jacks
inputs or up to 10 mono devices, and output mixed signal to

This device complies with part 15 of the FCC Rules. Operation

6. Power Indicator

Headphones Jack nor the output level through RCA .

multiple output jacks and headphones jack.
EQ Control: Adjusts the low / high frequency (bass / treble) level.
Headphones Jack: Stereo headphones can be connected to
this jack for convenient mix monitoring. 7. Headphones
USB Audio: Connect your JUST MIXER 2 to your computer, tablet Volume Knob
or phone using the provided USB cables. Power the mixer and 8. EQ Control Knobs
stream audio output to your connected device at the same time.
Bluetooth Connectivity: Connect and mix audio from
Bluetooth-enabled smart device (CH1 Only).

11.Headphones Jack: 3.5mm jack to plug in headphones is subject to the following two conditions:
■ SPECIFICATIONS 9. Channel Volume Sliders 10. Master Volume Slider

Nominal Input Level Controls

CH1 - CH 5 - Max Gain: 45dBm EQ Knob x 5
Input Impedance Channel Volume Slider x 5
5.6kΩ Headphones Knob x 1 11.Headphones Jack
Output Impedance Master Volume Slider x 1
12.Bluetooth Switch
OUTPUT 1kΩ Power Switch
Headphones Output Bluetooth Switch 1. USB Port: Connect to power source using provided USB
0.1mW (33Ω load) Connectors cable (or another USB cable), can also be used to output audio

5V/1A Adaptor Owner’s Manual for output. When the Bluetooth switch is turned on, the controls (1) This device may not cause harmful interference, and
USB to Micro USB
for CH1 will be used to control the Bluetooth input (2) this device must accept any interference received,
12.Bluetooth Switch: Turn On/Off Bluetooth function. source, and the CH1 input jack will no longer be used. including interference that may cause undesired operation.