The document provides instructions for operating and cleaning the pool pumps and filters at the Hasa Men's Plant Room, including starting and switching the main pool pumps, vacuuming the pool, backwashing and rinsing the sand filters, and draining, cleaning, and refilling the jacuzzi. Proper pump operation involves switching motors every 4 hours and shutting them off overnight, and the filters must be cleaned after sandstorms or on a scheduled basis to keep the pools circulating properly.
The document provides instructions for operating and cleaning the pool pumps and filters at the Hasa Men's Plant Room, including starting and switching the main pool pumps, vacuuming the pool, backwashing and rinsing the sand filters, and draining, cleaning, and refilling the jacuzzi. Proper pump operation involves switching motors every 4 hours and shutting them off overnight, and the filters must be cleaned after sandstorms or on a scheduled basis to keep the pools circulating properly.
The document provides instructions for operating and cleaning the pool pumps and filters at the Hasa Men's Plant Room, including starting and switching the main pool pumps, vacuuming the pool, backwashing and rinsing the sand filters, and draining, cleaning, and refilling the jacuzzi. Proper pump operation involves switching motors every 4 hours and shutting them off overnight, and the filters must be cleaned after sandstorms or on a scheduled basis to keep the pools circulating properly.
(start the day first to clean the pool and surroundings) 1. Turn on Main Pump motor 1, 2 or 3 ( or Baby pool motor pump) 2. Off the Skimmer valve 3. Open the Vacuum valve 4. Off the Main Drain valve A - Prepare the vacuum head, Hose and pole at the pool B - Start Brushing the side tiles of the pool C - Scrab the upper part of the side pool with soap to remove oil and dirt 5. Connect the vacuum hose at the vacuum outlet at the pool 6. Start vacuuming the floor area of the pool
Normal pump operation after done vacuuming the pool
1. Close the Vacuum Line Valve 2. Remove the vacuum hose at vacuum outlet in the Pool 3. Slowly open the Main Drain valve A - Check first the level of the water at pool before opening the skimmer valve. When the level of the water is at the recommended level, proceed to the step 4. 4. Open the Skimmer valve ( Pump Motor is now in normal circulation. During a day, every 4 hours switch the motor pumps and make the record: which motor pump is in use, what time it was switch ON and OFF. All motor pumps should be shut down over night). How to clean the pump sand filters after the Sandstorm or at scheduled time 1. Turn off the Main pool pump motors 1,2 & 3 2. Off the Skimmer valve 3. Off the Vacuum valve 4. Open the Main drain valve 5. Open the Backwash valve 6. Rotate the Multiport valve on the Backwash position ( Note : Al Hasa main pool motor pumps 1. 2 and 3, they have common circulation pipe Line located at upper part of the Motor pump. Close the two levels that are not in use, so the dirt don’t enter to the other pump’s Circulation). 7. Switch on the Main pump motor switch A - While doing backwash, check the water on the sight glass if the water is clear. When is clear proceed to the Step 8. 8. Switch off the Main pump motor switch 9. Rotate the Multiport Valve on the Rinse direction A - Leave the Backwash valve open 10. Switch on the Main pump switch A - While doing Rinse, check the water on the sight glass if the water is clear. When is clear proceed to the Step 11. 11. Switch off the Main pump motor switch 12. Rotate the Multiport Valve on the Filter direction 13. Close the Backwash line valve 14. Switch on the Main pump motor ( Pump sand filters are now clean and ready for Circulation) Jacuzzi pump operation 1. Turn off the Jacuzzi pump motor 2. Close the Skimmer valve 3. The Vacuum valve is closed already 4. Open the Main drain valve 5. Rotate the Multiport valve to the Waste direction 6. Open the Backwash line valve A - While draining the water, brush the the Jacuzzi floor to remove the dirt. After draining the water: 7. Turn off Jacuzzi pump motor 8. Rotate the Multiport valve on The Filter direction 9. Close the Backwash line valve 10. Open the Main drain valve (Skimmer Valve is still closed) 11. Start refilling water, open water supply until the level of water is in middle of the skimmer line 12. Turn on Jacuzzi pump motor 13. Slowly open the skimmer valve ( Jacuzzi is in normal circulation now)